Factory restore Acer Extensa 5630

Similar Questions

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• How to: perform a Vista Factory restore

  Original title: need to do a factory restore Vista but don't know how, I know how to do a system restore, but our computer has been hacked and want to return to the basics on this subject.

  Need to do a factory restore Vista but don't know how, cos our computer has been hacked. I know how to do a system restore, but not a factory one. I need to put the computer back to the sources.

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• 5420 recovery Acer extensa disk is no longer available... where I can find

  I have an Acer Extensa 5420.  The hard drive has been corrupted, so I replaced it with a new 320.  I don't have the recovery disks.  I contacted Acer and they said that they are no longer available.  My daughter just bought a new Acer Aspire, I was wondering if I order the recovery disc for her new laptop will be that I could use to reinstall an operating system or do I have the original.  If I can't do it, where can I get the recovery disc for the Extensa?

  Hello

  they are not the same models

  you have an Extensa, you daughter has an Aspire

  recovery discs are the model and the specific brand

  see if you have a recovery partition on your hard drive to factory back to top of page

  with an Acer, you press Alt + F10 at startup to start the recovery process

  and to make recovery disks it click on start - search under software Acer - then under eRecovery

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Pavilion 17-g113dx: Can can't Do Factory Restore on the new Windows computer 10 17-g113dx

  I'm doing f factory restore on my new computer with Windows 10 installed at the factory.

  When I go to Recovery Manager, choose the HP recovery environment, there is no option for the restoration of the factory.  When I select the use a unit option, I chose DVD (because I made the recovery discs), I get a message that the "selected boot device has failed.  I tried to boot the computer using F8 or F11 and who does not work either.

  I'm ready to pull my hair, does anyone have the answer?

  Thanks in advance for the help and suggestions.

  slave2mybirds wrote:
  

  When I go to Recovery Manager, choose the HP recovery environment, there is no option for the restoration of the factory.  When I select the use a unit option, I chose DVD (because I made the recovery discs), I get a message that the "selected boot device has failed.  I tried to boot the computer using F8 or F11 and who does not work either.

  Hello

  Thanks for posting in the Forum from HP Support.

  Here are the official instructions for the restoration > > http://support.hp.com/us-en/document/c04758961

  Double please, check, there should be an option, it can be called a bit different.

  If you still do not see it, please take a screenshot of windows screen/photo and attach it to your next post > > http://www.take-a-screenshot.org

• Factory restore

  I recently inherited a MacBook Pro. It runs on Mac OS X Version 10.6.4 Intel Core 17. In my view, that it was made in 2010.

  It will not update the operating system. Otherwise, it works great. I was told to hold the r/control/power button will restore the system, but it did not work. I believe that the factory restore will solve the problem of update, but I don't know how to do this.

  Before purchasing a used computer, you must have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.

  The first thing to do after the acquisition of the computer is to wipe the internal drive and install a new copy of Mac OS X. You - not the original owner, must do. Changes made by Apple over the years have made this very complex seemingly simple task.

  How would you do it depends on the model, and if you already have another Mac. If you are not sure of the model, enter the serial number on this page. Then, find the model on this page to see which version of the OS was initially installed.

  It is dangerous and may be illegal to use a computer with software installed by a previous owner.

  1. If you do not have another Mac

  a. If the machine comes with OS X 10.4 or 10.5, you need a Snow Leopard install disc (OS X 10.6) retail boxed and "Shrink Wrap" on the Apple Store or a reputable dealer - no eBay or something of the sort. If the machine is very old and has less than 1 GB of memory, you need to add in order to install 10.6. Preferably, install as much memory can take, according to the technical specifications.

  (b) if the machine comes with OS X 10.6, you need the installation media that accompanies it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media of the original owner, but if you do not, order replacements from Apple. A disc at retail, or the gray discs of another model, will not work.

  To start from an optical disc or a flash drive, insert it, and then restart the computer and hold the C key to start ringing. Release the button when you see the gray Apple logo on the screen.

  c. If the machine comes with OS X 10.7 or later version, you don't need media. It should start in the mode of Recovery of the Internet when you hold down the key combination option-command-R to start ringing. Release the keys when you see a spinning globe. Note that Mac Pro models turn over end of 2014 (with the box of "cheese grater") cannot use Internet recovery, regardless of what version of OS they shipped with. The Mac Pro round (2014 or later) can use it.

  d. some models 2010-2011 comes with OS X 10.6 and received a firmware update after 10.7 was released, allowing them to use Internet recovery. If you have one of these models, you cannot reinstall 10.6 even from the original media, and recovery of the Internet won't work either without Apple ID of the original owner, in this case, contact Apple technical supportor take the machine to an Apple Retail Store or other authorized service provider to have an operating system installed.

  2. If you do not have another Mac

  If you already have another Mac which has been upgraded in the App Store to the version of Mac OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use the recovery disk wizard to prepare a USB device, and then starts the new Mac of it by pressing the C key to start ringing. Alternatively, if you have a backup of OS X Time Machine 10.7.3 or later on an external hard drive (not a time Capsule or other network device), you can start by holding down the option key and clicking in the row of icons that is displayed. Note that if your other Mac has never updated in the App Store, you can not use this method.

  3 partition and install OS X

  a: If you see a lock screen trying to boot from the support installation or recovery mode, then a firmware password has been defined by the previous owner, or the machine was locked remotely via iCloud. You will need to either contact the owner or by the machine to an Apple Retail Store or other provider of service to be unlocked. May asked you proof of ownership.

  b. launch disk utility, and then select the internal drive icon - no volume icons nested beneath it. In the Partition tab, select the default options: a partition table GUID with the volume of data in Mac OS extended (journaled) format. This permanently deletes all existing data on the disk.

  c. an unusual problem can occur if all the following conditions apply:

  OS X 10.7 or later version has been installed by the previous owner

  The boot volume has been encrypted with FileVault

  You start in recovery mode (that is, not of a 10.6 disk installation)

  In this case, you will not be able to unlock the volume or partition the drive without the FileVault password. Ask for advice or see this discussion of the CSA.

  d. after partitioning, quit disk utility and run the OS X Installer. If you install a version of OS X was acquired from the App Store, you will need the Apple ID and password you used. When the installation is complete, the system reboots automatically in the Migration Wizard, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have all the data to be transferred, it is usually the best time to do it.

  e. run the software update and install all available Apple system updates. To upgrade to a major version of Mac OS X newer than 10.6, get it from the Mac App Store. Note that you can not keep an improved version that was installed by the first owner. He or she cannot legally transfer to you, and without the Apple ID, you will be able to update in a software update or reinstall, if it becomes necessary. Is the same for all App Store products that the previous owner installed, you will need to buy.

  4. other issues

  a. If the original owner "accepted" bundled iLife (iPhoto, iMovie and Garage Band) applications in the App Store so that he or she could put up-to-date, IRREVOCABLY linked to that Apple ID and you can download them without having to buy them. Reportedly, the Mac App Store Customer Service sometimes issued codes of reimbursement for these applications to second owners who asked.

  (b) if the previous owner has not Deauthorize the computer in the iTunes Store under his Apple ID, you will not be able to authorize immediately under your username. In this case, you will have either to wait up to 90 days or contact iTunes Support.

  c. When you try to create a new iCloud account, you could get a failure message: "Account limit reached." Apple imposes a limit of life of three configurations by device iCloud account. Erasure of the unit does not reset the limit. You can always use iCloud account that was created on another device, but you will not be able to create a new. Contact iCloud Support for more information. Configuration limit does not apply to the Apple ID accounts used for other services, such as iTunes and Mac App Store or iMessage. You can create as many accounts you want.

• Pavilion all-in-one Q214 23: factory restore on the new HP Pavilion all in one computer

  I have a week 6 old Pavilion Desktop all-in-one.  I wanted to do a factory install on it because I had a lot of extra things that I don't want anymore, I installed and I thought what a factory restore would be better.  I went to the HP Recovery Manager and no where in the choices he said 'factory restore '.  He used to have this option in the HP recovery environment.  I checked all the options and nothing on the factory restore.  I made a set of recovery discs, but I always remember that HP still had the opportunity to do a factory restore.  I have tried F11 and F8 and no luck.

  Answers or suggestions will be greatly appreciated.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  According to the model of the computer, it can not be called exactly the HP system recovery but if your computer is originally shipped with Windows preinstalled 10, recovery partition must be present.

  S ' Please, first manually copy your imporant most of the data on an external partition

  -Follow these instructions here to open the collection from inside Windows

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html

  > > http://www.tenforums.com/tutorials/4130-reset-windows-10-a.html#option2

  'S called it Reset - Windows Reset with options to RESET the machine as long as the plant (remove all), with an option to "freshen up" Windows and keep personal files.

  Let me know how it goes and if it works for you.

• Compaq Minin 311 Factory Restore does not

  Hello

  I have a Compaq Mini 311 with Win XP and I'm trying to restore it to start when press F11, nothing happens.

  How do I factory restore my mini?

  Thank you

  I suggest that you contact HP support and see if they are still able to provide you with a recovery kit.  If you live in the United States or to the Canada just call the 1-800-474-6836.  If you live in another part of the visit of the world Support of HP worldwide, select your country and then click on "contact us" at the bottom right of the screen.

• For Satellite C660 factory restore

  I installed windows 7 pro on my laptop which made my longer laptop for start and stop time down and little slow. now I just want to go back to the factory restore, how can I do this. the pre-installed recovery partition is not show in "my computer".

  Thank you very much

  You cannot start after installation of operating system HARD drive recovery clean facility more.
  You can do this via recovery DVD only.

  Did you create this disc by following the advice of Toshibas rappelling recovery or document s user manual?

  If you have this drive please use it for recovery image installation. If you n t have it you have a big problem today.

• Satellite A660 Factory Restore problems

  I have a Satellite A660 Ref. PSAW3A-14V062 delivered pre-installed with Win 7 not provided, but a hidden partition with disk recovery files.

  Decided to do a restore to factory from scratch but ends of disk errors. Removed the HD and connected to another computer.

  Using Acronis Disk Director, I copied the hidden partition (HDDRECOVERY) to another drive and then formatted the drive and copied the partition hidden in it and reinstalled to the laptop.
  Downloaded an ISO image and tried to install it from DVD but received the message that windows cannot be installed on the HARD disk that the drive is about to fail.

  Bought new HARD drive and copied the partition hidden for her.
  I then tried to install from the DVD, but kept getting errors about unable to find files, after ISO more several downloads and burn 5 different DVD the furthest I got was the screen where it is "files", this remains at 0% and nothing else.

  I then tried a factory restore using the "hold 0 during startup", but when I took out the key pressed 0 when the Toshiba start screen showed that nothing happened.

  There was a small Partition 'System' on the original HARD drive I have has not copied. I have a few questions.

  (1) the "System" partition did not the files needed to start the factory restore and if so is there anywhere I can download these files?

  (2) probably a topic for another thread, but no clue as to why I have so many problems with ISO files.

  Cheers and sorry for the long-winded explanation.

  The installation of any recovery is quite complicated. It is designed to avoid a kind of manipulation so original recovery image can be installed either using recovery DVDs or HARD disk recovery facility which must be created with Toshiba recovery disc creator tool.

  To be honest, the whole story is complicated enough, but what confuses me, is
  > Decided to do a restore to factory from scratch but ends of disk errors
  If I understand you right, you have created a drive recovery, right? What exactly happens?
  You can use this drive with new HARD drive?

  This method with files recovery to cope with the new HARD drive does not work. You will not be able to access and begin HARD recovery disk image installation.

  If you have a new HDD only how to install the original Toshiba recovery image is to use the recovery DVD disc.

• Can I update the image of factory restore?

  Hi all

  I recently had the pleasure to make a 'factory restore' on a M100 and an A300.

  While the process went smoothly (even if the A300 recovery disk creator should not be put back first to make it work), data that has been restored were, of course, obsolete because he didn't understand not updates either the operating system (Vista Home Basic) or to one of the Toshiba Software (including drivers and tools utility).

  I know that you can return the system to Toshiba for a new image of the HARD drive by them (at great cost), but I don't know if that provides a picture of 'update' or if she simply replaces the original image (obsolete).

  Is it possible the 'factory restore' image stored on the recovery partition can be updated and a user, or a technician of the 'non-Toshiba"without having recourse to external software such as Acronis?

  Thanks in advance for all advice offered.

  Hey Buddy,

  No, you can update the image of factory restore t. Settings (Windows, driver, etc.) are stored in an image that can t be changed or updated because these settings are pre-tested on your laptop computer and any change would be not compatible. In addition, I think that Windows updates are made with two or three clicks, you need just to a good internet connection. Alternative, you install Microsoft's latest Service Pack which contains many important updates ;)

  By the way: I made my own image using Acronis image. After the installation of recovery disk Toshiba I removed all applications that I n t need (ConfigFree for example), installed the Windows updates and my other apps that I need (Skype, Office, etc.). After that, I tested the laptop a bit and finally and especially that I created an image with Acronis. So I can restore my own settings every time too. ;)

• On Satellite A105 - S2131 factory restore

  I have a series of Toshiba Satellite A105 - S2131. I'm in the need to do a factory restore, but I don't have a restore disc, because I never saw when I got the computer, and when I tried to create a floppy disk to the computer that it does, I get an error that says in cannot find the file to create the disc. Now I don't know what I can do to make the factory restore.

  Any help would be great.

  Thank you

  Hello

  For me, there is a clear situation you need to order the new recovery media by the nearest authorized service provider.
  But you have another way to get own laptop preinstalled, use CD original Microsoft facilities. All the drivers, tools and utilities, you can find and download from Toshiba support site.

• K1 "unrecoverable error bootloader (0 x 19000008) after the factory restore".

  Having some problems with my K1 for a while & finally decided to do a factory restore and start over. Fact the factory restore (exactly like I had to with my android phone a couple of weeks) & now he jumped to the top with

  «Erase Userdata...»

  Boot loader fatal error (0 x 19000008)

  He sat there for a while. I tried to hold the power button, but nothing. This tablet has been updated to the latest version, it has not rooted or anything else. Just completely factory & updated. The problems I had when I decided to restore it was running mostly just super slow. Took forever to get the apps to arrive on the screen & such things. Thought I just having too much junk previously installed on it, so I tried to restore it & start over. Bad idea! Any idea? My 2 weeks im slammed all day every day & cant slow to call assistance & wait always hold to try & fix it (assuming that they can even repair). Would be delighted to hear that its an easy fix but I'm sure used to be the case. I bought it back in November 2011, so its only 6 months old.

  Hi Javahead

  How many times have you tried to restart since this error?

  Recently, I did the same thing after that my front cam went wrong. I got the same error. But after a few reboots and maybe wait a few minutes before trying again. Finally, he went through the process and completed successfully.

• Satellite A500 - factory restore

  Hiya

  I was wondering if someone can help me.

  I had no end of problems with my laptop with one thing and another, and for these last months, I had a problem with my windows install. I can not install, download or update anything because it says that there is an error with the installation program. I tried various things to try and fix this, but think that the only thing for me to do now is to do a factory restore.

  The problem is its asking me a password that I don't have. Is there a way to get around this?

  Thank you very much

  PS - or maybe someone can suggest a way to fix the installer: o)

  If you use the Windows login password, use the same. If not, put your account without password name and click Next.

• 5 created recovery media as requested, however factory restore discs, 6 were necessary to my restore!

  I clicked on finish, as it were has no more records requested when burning a batch of 5 (as requested by the HP Recovery Media software).

  Now when I'm trying to do a factory restore, she prays for disc 6 which of course I did not.

  As I have re-formatted everything back a little, I can't use F11 (?) to restore everything back except for my records. My laptop is a CTO dv7t-4100. I live in Australia but a new set of recovery disks are shown only to residents in USA & Canada. Any ideas please?

  This can help others in the same situation. http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-62996-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_auen