Failed installation of Bluetooth after conversion from 32 bit to 64 bit

Similar Questions

• Satellite T110 - Defective Bluetooth after waking from sleep

  SATELLITE T110 Bluetooth will fail after awakening from sleep.
  The icon will be flick between white and green as he seeks my device (phone).

  I ve reduced the problem to the laptop, because if I try to pair again phone to the laptop it fails. It's almost like he has a block?

  Operate as planned, then I have to charge fully.
  Bluetooth connects then as planned.

  It only became a problem because I installed the latest BIOS v 2.40
  I use the 64-bit Version.

  When the problem occurs I run the Bluetooth Diagnostics and it comes back as fine no error reported. It s a pain now because I use the laptop mode "sleep" more off.

  This is due to the new update of the bios.

  Can you after waking from sleep just restart BT stack and try to connect to the mobile phone?
  You mean that with the old version of the BIOS, everything was OK?

  Last question: what was the reason for the update of the BIOS? I hope not the fact you want to have the latest version.

• Need help from blackBerry - failed to connect Bluetooth transfer files from Sony Ericsson Smartphones

  I just bought my first Blackberry Curve 8900 and I can't transfer my contacts from my old phone, Sony Ericsson W660i, to my Blackberry. It says bluetooth connection failed. I was able to pair the devices, and it's ok. I can't yet to transfer files images of my Sony to the Blackberry. Can anyone help?

  Thank you

  Great, please mark the thread has been resolved for you, better for users with the same question, thank you.

• problem with the files of exported data after conversion from 10.1 to 10.3 OPA OPA

  Hello
  
  If all goes well a relatively simple question
  
  We have recently acquired access to the OPA 10.3
  
  We have previously developed a 10.1 modules which we imported 10.3 using the upgrade features. This one is designed to be an interface from machine to machine and as such is entirely dependent on the Fed data to make decisions, there is no question screens or interviews.
  
  Then, we have tried to import some ".xds" files we had created to 10.1. There are more than 160 of them, including in general more than 120 items of data in each with multiple entities and bodies.
  
  When we import in 10.3 you get an error message which reads:
  
  
  + "System.NullReferenceException: object reference not set to an instance of an object." +
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadEntity (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.LegacySessionDataXDSImporter.ReadSessionData (XMLStreamReader reader) +.
  
  + Oracle.Determinations.Remote2.Util.SessionDataXDSUtils.ImportSession (SessionData sessionData, Rulebase rulebase File xmlFile) +.
  
  at Oracle.Modelling.Debugger.Core.UI.DebuggerRunView.btnImport_Click (Object sender, EventArgs e) + ' + '.
  
  the simple solution is for us to reintroduce the '.xds' files in the debugger, but given that it it took over 2 weeks for our team at the entrance of the '.xds' in the first place, we would obviously like to explore other options first!
  
  Any help or ideas would be greatly appreciated
  
  See you soon
  
  Dave

  Hi Dave,.

  I have this working on the copy of the modules I've had, it's because your entity / relationship public names do not match the .xds, probably because of the upgrade file. I sent you an email on this subject.

• Runtime error 1009 after conversion from Flex 3.6 to 4.5.1

  I am trying to convert my SDK 3.6 application 4.5.1.  Process goes smoothly through many resources out there including Greg Lafrance http://www.adobe.com/devnet/flex/articles/migrating-flex-apps-part1.html series

  Now, I get an error while the application is loading in the browser.  The error text is:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  hand / initApp ()...

  The error occurs in the code AS where I'm looking to get the URL of the player using the mx.utils.URLUtil library.  In particular, I'll put a global variable in my application to the URL of the visitor.  The specific code for this is:

  this.stServerName = URLUtil.getServerName (mainApp.url);

  URLUtil is still in use in Flex 4.5.1?  If not, is there another way to get the name of the server on the host?

  Thank you!

  Lee

  URLUtil still exists.  I would check that's null.

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  After the system starts. I get the error message; "" Unable to start Bluetooth stack service "from BTTray.

  Pls I need help to resolve this error message.

  Concerning

  Unfortunately, this model laptop has a Broadcom bluetooth device or a device of Atheros.

  Try to install the Atheros driver first because it is more common.  If it isn't an Atheros card, Setup HP rejects the update indicating no match of material.

  If this isn't Atheros, install the Broadcom bluetooth driver.

  Here is the page of the driver for your laptop and Windows 7 64-bit.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5218666#n311

  Bluetooth drivers are in the category network drivers.

  Let me know what happens.

• Cannot install Ligthroom 6. Download version failed Installation stop after 3%.

  I can't install the version downloadable lgthroom 6 & CD version on my computer.

  LR 5 already install without problems anx in version 5.7.

  The installation is stopped after 3%.

  Please check if you have any security software then please turn it off, also disable any kind of internet security for now program.

  Go to > C:\Users\User Name\AppData\Local\Temp - delete the contents of this folder also give permissions to the TEMP folder see, Set, view, change, or remove permissions on files and folders

  After that run the Setup program for Lightroom 6 as administrator (right click > run as administrator)

• How can I transfer all the messages/conversations from my iphone to messages.app on my mac?

  Hi people,

  Maybe someone can help me:

  How can I transfer the entire contents of my messages app on my iphone to the messages on my mac app?

  the problem is, when I create in the messages app a new account with my appl ID (for example on a new mac) I also use with my iphone, so everything worked very well for the starting point of creation.

  BUT... some older posts, I have on my iphone will appear in the new messages.app - account on my mac.

  I have thousands of old messages and conversations, I now can only see on my phone or with some more or less useful third party apps. those who cannot vonert messages to a PDF file or som other format useful semi > but no one can transfer it in the messages app.

  • I learned that apple does not save my imessages for more than 72hours (which makes me happy because of the confidentiality of the data), so I can't take via imessages-servers.
  • I also learned that it is possible to transfer data from the library files to a previous account. but unfortunately, I've just accidentally deleted those files, so this solution won't help:
  • I had serious problems to enable the transfer of SMS on a second mac (I guess I failed it in between), I went in the ususal trial & error-process and disabled the account of messages on the mac.
  • After that, I deleted all caches using onyx. then I restarted the iphone and the macbook and restarted the messages app.
  • the app behave like the 'never used before': I entered my apple, app ID remind my cell phone number and all other settings from the old account, but THE MESSAGES WERE GONE alle.
  • I don't know I deleted the using onyx. but there should be a way to win back them?

  the system configuration:

  • Start "2011-17 - macbook pro with latest el capitan (10.11.6)"
  • iPhone 6 with latest iOS (9.3.5)

  PLEASE Please HELP me - even if I use third-party software...

  Hello

  Can't do.

  iMessages are pushed by the iMessages servers to devices recorded at this time there.

  They are not held on servers and are deleted as soon as receiving devices accept.

  (that is, it is not like electronic mail that can be left on the server (POP) or rest on the (IMAP) server to be retried by other devices that can identify you later).

  How the files/iMessages are stored on the iPhone and the way the Mac stores are not the same.

  It is possible to have the iPhone one store backup via iTunes on Mac.

  From there on, it is possible to use third party applications to read (check out them and make them as text files), but they cannot be forced into Messages.

  By copying and pasting entire conversations from one chat to another it's the Mac send s just like a long piece of text with few (not in use) formatting.

  Can also have problems with actually duplicate the whole file with space on the iPhone in the first place.

  

  19:44 Friday. September 2, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Missing Bluetooth after upgrade to Windows 10

  I got a Yoga 2 13. I just finished the upgrade of 8.1 for Windows 10. After the upgrade I can't see the possibility to connect bluetooth devices, nor what I see the driver Bluetooth listed in Device Manager. I downloaded and installed the drivers for Bluetooth 10 Windows from the support site (2cyb01af.exe), but it still does not come back.

  I see a "unknown USB device (device descriptor failed) driver in the Device Manager." Show properties

  Windows has stopped this device because it has reported problems. (Code 43)

  A request for the USB device descriptor has failed.

  I suspect this is the driver for the bluetooth, but I'm not sure. If someone did an upgrade and had this problem.

  Hello Rick

  Yes, I've tried both and the Intel was one that worked.

  I was able to solve the problem. I had to do a full reboot, not only the windows restart. I finished the startup in the BIOS, the Bluetooth was back to check if there was something there that has been disabled, and when I went back to windows.

  Thank you

• Windows 8 (x 64) - upgrade of Windows 7 Ultimate (x 64) DVD (in English) is a failed installation

  After an error starting during the update of the victory 8, I can't go beyond the failed installation of the installation dialog box.

  I tried some marbles or footprints, and every newspaper, the forums say look are empty or not exist.

  Where am I going to clean the registry/file system to make the process of installation from scratch?

  Thank you

  I had to take a multiple step approach:
  • created a new admin user account
  • connected to this account
  • turn off all apps "run at startup".
  • disabled the Norton 360 firewall
  • restarted
  Windows 8 Pro upgrade in place installation finally occurred.
  Thanks for your help.

• P2V error: FAILED: an error occurred during conversion: "2338 ' platform-specific error".

  
  Got this message when trying to P2v of Windows 2003 SP2 server on workgroup.   Using the IP address and a local administrator account to connect to the server and the connection to vCenter to add the VM on the host.  The source server is in a workgroup and vCenter server reside in the field, but I can't do a ping from source to vCenter and source of vConverter server and vice versa.   So, doesn't seem to be a firewall issue or the port number.   My account exist on vCenter data center as an administrator, so I should have no problem with permission.

  FAILED: An error occurred during conversion:
  'Platform-specific error 2338'

  Message to: task: Convert physical machine.

  A note more: host of the ESXi 5.0 that I'm trying to place the virtual machine on a double 10G uplinks defined in Full, while the physical server has a 1 G network card.   It is still duplexing of lag, but do not know if it would be a problem here.  Also, am using vCenter Converter standalone ver5.1 to vCenter on ESXi 5.0 5.0 build 1117897.  Configuration standard vSwitch.

  Have tried to locate what means this error and previously paint white.   Any help is appreciated.

  Thank you very much

  I don't know, ports and/or connection settigs could be changed after P2V previsous... check the connection settings, consult the manual.

• Failed installation of Oracle on Oracle Enterprise Linux.

  Hi all
  I installed Enterprise Linux version 5 Update 2 for x 86 (32 bit) on my Vmware Virtaul oracle machine electronically supplied. When I try to install Oracle Database 10 g Release 2 (10.2.0.1.0) for Linux x 86, after you run the runInstaller, I get the following error.
  
  [data oracle@vmware] $. / runInstaller
  From Oracle Universal Installer...
  
  Checking Installer requirements...
  
  Checking the operating system version: must be redhat-3, 9-SuSE, redhat-4, UnitedLinux - 1.0, asianux-1 or asianux-2
  Failure of < < < <
  
  Note: Oracle E-Delivery provided 5 CD downlaod Enterprise Linux version 5 Update 2 for x 86 (32 bit). But the LINUX installation finished successfully with 3 CD only. I don't have no idea for what purpose the CD remains 4 and 5. do I need to install separately from 4 and 5 from the CD. Is that what the problem of the failed installation orcle DB or is there a proprietary database that I need to download for Enterprise Linux version 5 Update 2 for x 86 (32 bit).
  
  Any help in this matter is highly appreciated.
  Thank you very much.

  How to connect as the user oracle, directly to the OS login or su - root ed?

  If the former:

  $ export DISPLAY =: 0.0
  xclock $

  If the latter (as root):

  # xhost +.
  # su - oracle
  $ export DISPLAY =: 0.0
  xclock $

  Do not go further if xclock command does not show you the analog clock.

• How permanently delete a Skype conversation from Skype servers!

  Hello

  I did some research and reading that the Skype servers do not keep the conversations. I'm going to believe that it is a myth! I have only 2 machines that I use and the two installation without history and erased from history. A few minutes ago I installed 3rd device. As soon as I connected to the new device all loading conversations that I deleted them a long time ago.

  How does this happen? How can I get rid off the conversations of my account?

  Skype servers (the cloud) now see the most recent history of conversations. It is a recent feature related to the transition to the cloud based service.

  https://support.Skype.com/en/FAQ/FA12381/what-is-the-cloud

  With this new service, chat conversations are synchronized between different devices. However, because of a bug in the version 6.11 of Skype (or not properly functioning "cloud" service), messages have been re-uploaded even if no chat history option has been chosen on a device. This bug is supposed to be fixed with the latest update of Skype 6.13.0.104.

  http://download.Skype.com/MSI/SkypeSetup_6.13.0.104.msi

• Error when you try to install Mass Effect 2: failed installation. A data error occurred.

  problems of mass effect 2

  Hello

  I have windows XP media center edition 2005 and are unable to install 2 mass effect. After some installation, it says: failed installation. A data error occurred.  It is supposed to be windows 7 compatible. I tried running the compatibility problems, but the same thing happens. Someone knows how to fix this?

  Hello

  Try the methods below:

  Method 1:

  Try to copy the contents of the CD to your hard drive to check if your CD has gone wrong.

  Method 2:

  Try to install the application with administrator privileges and check for the issue.

  If you always fall on the issue, you can view the query in the mass effect Community Forum:

  http://meforums.bioware.com/viewforum.html?Forum=127