Failed to connect to the data source of the network

Similar Questions

• Satellite Pro A60 failed to connect to the network after the fashion watch

  Satellite Pro A60 running XP Home.

  When I close the lid it goes mode 5000mAh as set upwards. When I lift the lid, I find that I have to restart to re-establish the connection to the internet through the wireless router. When this happens other computers using the same router not disconnected.

  I've heard talk about this but I got lucky and on my Satellite WIFI connection works after minutes again. Have you tried to deactivate and activate the WLAN using FN + F8 key combination?

  Maybe after short toggle the WiFi works again.

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.

• Fails to connect to the Proxy Server

  My internet works but are used.  He says he "fails to connect to the Proxy Server" is due to firewall settings?  and how to change them.

  Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).

  Suggest you contact support OBJECTIVE to: http://help.aol.com/help/product/aim/

• Acer Iconia A-810 fails to connect to the Google Server

  I just this tablet and everything so far is ok, but it fails to connect to the Google server. He has no problem connecting to other servers however. Both laptops and another my Tablet connect to the Google server perfectly. I use ATT broadband. So I guess that something in the Acer Iconia tablet is the origin of the problem. Any suggestion?

  Thanks in advance,

  Marina

  1. go to setting-> Applications-> shop game Google-> erase-> empty the Cache.
  2. go in setting-> Applications-> Service Google Play-> erase-> empty the Cache.
  3. Enter your Google username and password after opening Google Play Store again.

  I hope this works.

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• My blueray DVD fails to connect to the access point

  I have a blueray player which has wifi.  Whenever I try to connect to the network that it fails.  I see the available network connections and put in the passwords, but it will still not connect.

  Hello

  What is the number and the model of your Blue Ray player?

  I recommend you contact the manufacturer of your Blue Ray player, and I'm sure they will help you solve this problem.

• Failed to connect to the JMX service (209,1046) when you try to view the logs in PeopleTools 8.55

  I am trying to use the new functionality of Log Viewer PeopleTools 8.55.

  It is a great improvement that allows developers/testers/support team members to display the application server logs, process scheduler logs and newspapers PIA; with a regular account of the PeopleSoft Application.

  You have no need to create a system account on the server (Linux or Windows) for users to view the logs.

  I managed to configure the Web server log viewer, but when I try to Application I can see message failed to connect to the JMX service (209,1046).

  
  

  When I configure the JMX for APPDOM user, I tried PTADMIN with no success.

  
  

  Could someone describe the process to change the JMX user for Tuxedo domain?

  
  

  Thank you

  Stéphane.

  the default installation of DPK password is password.

  Kind regards

  / Stéphane.

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• Failed to connect to the user when it connects to SQL Server 2008 R2 gateway

  Hi - This is my first post!

  I have problems to connect to a SQL Server 2008 R2 to Oracle database 11 g R2 database, use the product of the gateway.

  Previously, he has worked, but we moved the database SQL 2005 to 2008 (R2).

  We receive this error while trying to query through the link (Select * FROM DUAL@ADSRD)

  ORA-01017: name of user and password invalid. connection refused

  [Oracle] [ODBC SQL Server driver] [SQL Server] Failed to connect to the user 'SQLUSER '. {NativeErr 28000, = 18456} [Oracle] [ODBC SQL Server driver] Invalid connection string attribute {01 S 00}

  ORA-02063: preceding 2 lines of ADSRD

  01017 00000 - "invalid username/password; connection refused '.

  * Cause:

  * Action:

  Error on line: 1 column: 35

  The DG4MSQL configuration is here:

  HS_FDS_CONNECT_INFO = //SSU_PRD_APP/IntegrationStagingDb [BSYS-sql2]

  HS_FDS_TRACE_LEVEL = OFF

  HD_TRANSACTION_MODEL = READ_ONLY

  #HS_FDS_DELAYED_OPEN = FALSE

  HS_FDS_FETCH_ROWS = 100

  HS_OPEN_CURSORS = 50

  
  

  The database is hosted in its own instance on the sql2-BSYS Server

  Then... on the SQL Server event logs returns this:

  Failed to connect to the user 'SQLUSER '. Reason: Failed to try to connect using SQL authentication. Server is configured for Windows authentication only. [CLIENT: 192.168.10.179]

  However, the SQL Instance IS configured to enable mixed mode authentication.

  I can't work on what I missed, and I can confirm if I'm actually to a compatibility issue between the gateway and the version of SQL server, that we are now trying to connect.

  Help please!

  Is the user name in your SQL Server database in the capital, mixed mode letters or small letters?

  Currently, you have created a database link that tries to authenticate on the server SQL using SQLUSER in capital letters. If you use mixed or small letters, so be sure to write the user name (and password) as it is in the create database link statement and surround it with double quotes.

  If you have created the link of database correctly, try an ODBC connection for example from your client and add the user name and password. Does it work?

  -Klaus

• An unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  I recently bought a drone DJI Phantom 3 kind have been treatment of videos more than usual and not have not had any problems. I use Lightroom for cataloging movies and I use the first to change.

  Since yesterday, I was not able to import any movie that I get the following error

  an unknown error has occurred during playback of the video file. failed to connect to the server of dynamic links

  

  Initially, I thought that it was due to a spectacular crash of drone (Physics isn't SHE!) who corrupted the file that was being logged, m ais I can now no longer import any movie to Lightroom.

  
  I tried the following

  1. a different memory with a new registration card

  2 removing and re - import an old movie

  3. to remove and re-import and old movie created by another camera

  4. to remove Lightroom and rolling back to the previous version of LR CC (CC 2015 [1014445])-had the advantage of getting rid of the annoying new import dialog screen. -

  5. upgrade to El Capitan to see if maybe OSX update may help.

  
  

  None of them had no effect, can anyone help?
  

  
  

  
  

  
  

  
  

  
  

  Hello

  You're welcome ShawWellPete, I thank you for everything.

  Yes, this person is the windows user, but it was the same question that could have been resolved by quicktime 7. (pending confirmation)

  Try to disable the start-up services and restart the mac and then try: take control of start-up and connection elements. Macworld

  There could be some service startup that is in conflict.

  Concerning

  Jitendra

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• Can connect to the network, but not the internet, a "Local" access only

  Just installed a new router and am now unable to connect to internet on my HP laptop. The laptop is running Windows Vista 64-bit Service pack 1. Pulling him diagnose & repair window returns a message indicating "your modem or router is not available.

  I tried several things to get the internet to connect. I have reinstalled the driver, turned off the firewall, disabled the Internet Version 6 (TCP/IPv6) Protocol and manually configure the network connection.

  I have a desktop computer with a wireless adapater that performs the exact same OS as the laptop and I have no problem with this connection.

  I am able to connect to the internet if I connect the laptop to the ethernet cable. I am completely confused and would appreciate any advice!

  Hi Ima be,

  You can follow the steps below and check if that helps you solve the problem.

  Method 1

  Try to power cycle the router and the computer and check if it helps.

  On the PC:

  1. Save your work and restart the machine.

  On the router or modem (if wireless printing):

  1. Unplug the router and the modem.
  2. Wait 30 seconds.
  3. Plug in the modem and wait for it to come to the ready state.
  4. Plug in the router.

  After you put cycle check the connection between the router and the computer.

  Method 2

  If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
   
  Disable the IP helpdesk:
  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
  2. scroll down to the IP assistance service, right-click on it and select Properties
  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
  4. then click on "Stop" to stop the service from running in the current session
  5. click on OK to exit the dialog box

  Method 3

  Disable IPv6 and remove IPv6 virtual cards:
   
  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
  NOTE: You should do this for each network connection, even if they are disabled.

  Method 4

  Disable the DHCP Broadcast Flag:
  Link: http://support.microsoft.com/default.aspx/kb/928233
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
   
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
   
  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
  1. Click Start, type regedit in the search box, and then click regedit in the list programs.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. Locate and then click the following registry subkey:
  4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
  5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
  6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
  7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
  8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
  9. in the value data box, type 1 and then click OK.
  10. close the registry editor.
   
  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
  You can also try uninstalling and reinstalling the driver for the wireless card.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Some applications stopped the connection to the network, while the rest of them still not connect...

  A month ago, I realized that Hulu Desktop not working not. Gives me a generic error message. but nothing else. I thought that it was related with Hulu Desktop, then, naturally I looked for support on their site.

  During this time, I realized application Pandora AIR One did not work either. I thought that this might be related with Adobe Flash player or Adobe AIR. My first goal turned in this sense.

  Then I finally realized than iTunes, and also stopped the Cisco VPN client connection to the network.

  I use these applications on a daily basis, make none of the apps took about two weeks. Try to find a common solution in question, and possibly on another two weeks...

  Moreover, the rest of the applications work fine, no glicth: these are some of the applications, I use every day without any problem:

  • Internet Explorer
  • Chrome
  • Firefox
  • Opera
  • Safari
  • FileZilla FTP

  First of all the error messages I get:

  Windows Sidebar Gadgets (Weather, RSS Reader, etc.)
  Unable to connect to the service.

  Cisco AnyConnect VPN Client
  Connection failed: the host is unreachable.

  Hulu Desktop
  We're sorry, but Hulu Desktop is unable to connect to the server.
  Please check your internet connection settings and try again.

  Pandora
  Your computer has problems of connection to the network.
  Click 'connect' to try again.

  iTunes
  iTunes could not connect to the iTunes Store.
  Make sure your network connection is active and try again.

  This is the only application error messages. Windows is not trow an error.
  Here are a few things I tried, with the hope of resolving this problem of connection of mystery:
  (not in this specific Ref. necessarily)
  • Wireless connection with wired connection of switch to a router
  • Connect my laptop directly to the cable modem
  • Turning off Windows Firewall (firewall)
  • Reset the Windows Firewall to the default settings
  • Deactivation of Microsoft Security Essentials (anti-virus)
  • Open the computer in Mode safe mode with networking
  • Uninstall and reinstall these applications and the related necessary subsets such as Flash Player, AIR, etc.

  A friend suggested the creation of a local account on Windows. So I tried that too. I created two accounts; an admin and a guest. Not surprisingly (!) these requests, I'm having problems for almost a month or two, worked. No error message, just worked.
  Here's the thing: I still don't know what's causing this problem on my main account from the system.
  I can move all my settings and configurations of the new account system. But what happens if these problems occur again. It's already a big hassle, autour file transfer and the account settings.
  Has anyone out there have similar problems and/or has the answer, please help me. It's so frustrating. I appreciate any leads or you can provide solutions.
  Thank you
  Osman
  p.s. I do not think that everything is relevant but here's HW and SW Details:
  Windows 7 Professional 64 bit
  Dell Precision M4300 laptop
  All the toutes les mises updates update Windows Update, all mentioned applications, drive, Flash, AIR, etc are up to date.

  I found the solution. :-)

  Open Internet Options, Advanced tab. Click the reset button in the box 'Settings reset Internet Explorer'.

  My applications are now online.

  Read this article if you need help to reset IE:

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings

• Cannot connect to the network or perform system restore after installing updates have been

  WIN 7 Home Premium running on a gateway PC connected to the internet via an ethernet connection using a RealTek network adapter for the past 5 years with no problems. Running Avast Pro antivirus / internet security.  09/02/2016, Microsoft and Avast downloaded and installed updates on the PC.  After the PC auto-redémarré as part of the Microsoft updates, I couldn't connect to the internet.  Connect to the network now says unidentified network - no network connection.  The adapter looks like to she always sees the (watch 100 Mbps) connection, but no data packet move.  Device Manager indicates that the unit is working normally.

  I ran through the resolution of the problems of Windows network. I checked the cable was attached, reset the home modem, reset the adapter (toggle), uninstalled/reinstalled using the latest adapter driver available.  I have disabled the Windows Firewall because Firewall Avast wouldn't start.  I disabled all the Avast settings to see if it eliminated the problem.  I tried to run the system restore before the updates but continue to spread the message that there was an unexplained error and restore failed.  All this was done in Normal mode. I restarted mode safe and had the same problems without success.

  I was able to clear the problem by manually uninstalling updates of security Windows which were loaded on 09/02/2016 through the programs and features Control Panel. Then I did the repair of Avast program operation.  I rebooted the computer and the internet connection worked. Then I reinstalled manually updates Windows security on the Windows Update program.