Failed to initialize the management of startup programs

Similar Questions

• Failed to initialize the installation program. Error 110. On Windows XP.

  Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:

  Failed to initialize the installation program. Error 110.

  I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?

  Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:

  1. reboot Windows XP in Safe Mode
  2. double-click on the Setup program to start the installation process
  3 cancel the installation process after it starts
  4. restart windows in normal mode

  Now, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.

• The CC extensions manager fails to start with a message "failed to initialize the extensions Manager.

  I installed via Adobe Updater CC CC extensions Manager. When I try and launch the CC extensions Manager, a dialog box appears and says: "failed to initialize the extensions Manager. It won't let me open up after I click OK and it closes.

  The CC extensions manager would conflict with Extension Manager CS6? Other possible solutions?

  I tried to restart, all the CC (and CS6 are up-to-date), and I tried to uninstall and reinstall the CC extensions Manager. Nothing has worked so far.

  Let me know... Thank you!

  Solved.

  What worked for me:

  1 remove an installed copy of the CC extensions Manager

  2. disconnect from the corporate network, log in as a local administrator

  3. download Extension Manager CC of Adobe - Exchange: download Adobe Extension Manager

  4 install

  5 kill the synchronization process of basic creative cloud with the Task Manager

  6. go in C:\ProgramData\Adobe\Extension CC\Configuration\DB Manager and remove or rename the ExMan.db file

  7. start Extension Manager and install extensions

• Whenever I connect to my computer I get this message: «assert in LSP...» Failed to initialize the mutex. ERR = 5 "

  original title: everytime I log in I get this message... Assert in LSP... Failed to initialize the mutex. ERR = 5./common/shared_memory_ptr.h:188

  X assert in LSP

  fake

  Failed to initialize the mutex. ERR = 5

  ./Common/shared_memory_ptr.h:188

  Abort retry ignore

  What this means... what should I do to fix this

  If I go to any site... it redirects me to one of the CHOICES... Lost IM really have no computer knowledge

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode with network and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Failed to initialize the DFX audio enhancer

  original title: DFX audio enhancer and Windows 7 compatibility issues

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.
  Update downloaded DFX and now receive an error message stating:
  "Failed to initialize the DFX.
  Please reinstall DFX.
             

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.

  Update downloaded DFX and now receive an error message stating:

  "Failed to initialize the DFX.

  Please reinstall DFX.

             

  Hello, Steve.

  See if that helps

  Internet Explorer 9 may stop responding if the DFX Audio Enhancer is installed http://support.Microsoft.com/kb/2727797/en-us?SD=RSS&SPID=15672 Alternatively, you can try to install using compatibility mode. http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f Contact technical support DFX http://www.FXsound.com/

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Norton Internet Security should be included in the list of startup programs?

  I use Vista Home premium 32-bit with SP2 for Vista
  Norton Internet Security 2010 v 17.8.0.5

  When I go to:
  Run > msconfig > Start Up Programs

  I don't see anything there about Norton or Symantec.
  I see it running in the list of services, but NOT in the list of the startup programs
  I have Norton Internet Security has the value 'early charge', so it shouldn't be in the list of startup programs?

  I swear I saw him in programs before starting.

  Must show in the start up programs?

  The entries you see in the list of services are service installed to work with the Internet Services of Norton. They are not in the program.

  Have you tried looking in Autoruns?

  To identify what loads when you start using Autoruns (freeware from Microsoft).
   http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Error "failed to initialize the Viewer...". »

  I am trying to display a CD Microsoft Office Specialist approved courseware for Excel 2003 and I get the following error

  "Failed to initialize the Viewer. If you installed the Viewer to your computer, rerun Setup. If you access the viewer of a server, contact your system administrator.

  General exception. "

  I tried to run the patch as described on this site in 2006 and the command has been executed but I still get the same message, even after reboot. Someone else recommended to rename one of the files windows32 but it won't let me do - it just keeps asking me to try again. It was previously posted in MELL (Microsoft E-learning library).

  It comes with Vista, upgrade install and activate Forum.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel in the Office discussion groups above.

  At soon Mick Murphy - Microsoft partner

• ORA-01804: failed to initialize the zone in DB11.2.0.4 information

  Dear Experts,

  I installed Oracle DB 11.2.0.4 to upgrade my current DB 11.1.0.7 to 11.2.0.4.

  When I try to connect to the DB I get the following errors

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  SP2-0152: ORACLE does not work properly

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  
  

  SP2-0152: ORACLE does not work properly

  
  

  I use Oracle linux 86 and I installed the R12.1.1 application.

  
  

  Kind regards

  
  

  Ahmad,

  
  

  
  

  
  

  I found the solution in this Doc ID 1562424.1

• MapBuilder.jar: failed to initialize the appearance: null

  When I try to start mapbuilder using java-jar mapbuilder.jar it crashes:
  
  Failed to initialize the appearance: null
  error: java.lang.NullPointerException
  
  Running 64-bit Linux in a VNC session.
  
  Anyone else seen this?
  
  JAVA_HOME is set.

  Try to use a version of bit java32 (minimum jre 1.5 or later), and to give the full path, I don't know a lot of Linux.

  See you soon
  Nico

  Published by: gerardnico on August 26, 2009 22:26 Add jre 1.5 or later

• Error starting program: failed to initialize the graphics system

  I just upgraded to Windows Vista 64 bit to Windows 7 64 bit.  I now have problems of execution of Roller Coaster Tycoon 2.  I get an error that says: "failed to initialize graphics system '.  I think the problem has something to do with the program you want to run in 256 k colors.  I installed the new video drivers on the Dell Web site, but it did not help.  Any ideas?  Thanks in advance.

  See if you can use a Compatibility Mode setting to run in 256 colors?

  How to troubleshoot a program that does not run as expected once it is installed on Windows Vista
  http://support.Microsoft.com/kb/931362/en-us

  Make older programs in this version of Windows
  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Windows Vista Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/details.aspx

  Windows 7 Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

• delete the system registry startup programs

  OK, I know I can use msconfig and windows defender to remove/disable startup programs.

  But some programs on a computer have a mind of its own and keep reinitialsing each time I restart my computer.

  I keep having to disable it process using the Task Manager. There are a dozen of programs that constantly to do this.

  the computer is a dual core 2.66gh 32-bit Windows vista. I have no disk Vista so I can't do a full reformat.

  the computer is also running emensly I suspect a slow virus. I'm unraveling this computer for a friend who has installed the wich following programs, I feel are contradictory, so I try for a clean boot and eliminate any software virus etc. these programs include;

  Spybot s & d

  malawarebytes

  SUPERAntiSpyware

  Ad-aware

  and some mcaffee widget freeware

  to name a few.

  I'm trying to install trend micro internet security total to cover the withdrawal of these programs.

  Can I remove programs in startup list via the registry using regedit in the affirmative were to do to find them. I know this might be a dangerouse exorcise, but I must try if possible.

  Help, please.

  The program Autoruns from Microsoft Sysinternals most of the registry locations where things can be started from the list and is easier than the use of regedit.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  And Yes, if you turn off the bad thing that you can completely mess up the system.

  Here is an introduction to the use of Sysinternals tools

  http://www.msteched.com/2010/NorthAmerica/WCL314

• How manage/remove startup programs in Windows 7

  Crikey!

  You people are things made and actions 'hard '!

  With "how manage/remove programs startup in Windows 7?",...

  Everything I've ever done is to find the startup program (in the "All programs" list, have a good overview of what is there, then, VERY SIMPLY, remove those I don't want to open at startup.)

  When THIS is done, the program (s), I have DELETED does NOT start.

  At the start, never!

  Period!

  Some software packages will place their TITLE... at the beginning, without your consent.

  And, it's 'how' I get rid of them. I have this same title... in the "All programs" list, in any case!

  Autoruns is a great program for geeks, but for the average home user it generates so much information it can be a nightmare.

  Stick to the MsConfig - Startup tab in a 1st time, but start in programs and features when cleaning. You don't need to worry about something in the boot if you can remove the program anyway.

  Printer drivers HP is a good example. Many have their program of customer Participation and the consumables installation order plated on by default, but for the majority of users, as they are not necessary. Despite a message claiming that, on the contrary they do not affect printer operation at all.

• Error scan Dell: failed to initialize the selected paper source

  My Dell Scanner doesn't scan.  error message: failed to initialize selected paper source. Thanks for your help with this.  It's a Dell Photo 926

  Hello

  From my research, I want to suggest to follow the steps mentioned below:

  (a) make sure that you have installed all Windows updates, you can either install update via Windows Update or download it manually. Here I recommend you to install the latest Windows 7 and Windows Server 2008 R2 Application Compatibility Update.

  Windows 7 and Windows Server 2008 R2 Application Compatibility Update

  http://support.Microsoft.com/default.aspx?kbid=974332

  b) unplug the printer.

  c) download Dell Photo all-in-One Printer 926 Patch to completely remove the printer from your computer. You must run this patch until he asked to restart the computer.

  Reference the Dell Photo all-in-One Printer 926

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&l=en&s=BSD&CS=04&DriverID=R166248

  (d) restart your computer.

  (e) to download the compatible driver Windows 7.

  Dell Photo 926 all-in-one printer

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20Photo%20926%20All-in-One%20Printer&v=Dell&uid=DELL926&pf=0&pi=3&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit

  (f) install the driver when connecting the printer (power on) via a USB cable.

  Hope this information helps.