Similar Questions

• Software HP C4380 fails to install on Win 7 64 bit

  My printer HP C4380 scanner no longer works, so I added another printer with scanner to work on my wireless network, but then I couldn't have my C4380 HP to run even if it was by default, so I uninstalled the other printer because I prefer my HP.  After uninstalling the other printer, I couldn't run my HP at all.  I got the message that it was not connected.  I tried electrician.  No luck.  Then, I did scan and printing doctor who told me to uninstall and reinstall the software.  I uninstalled and then to reinstall my HP cd and received message it did not meet the requirements of the system (Win 7 64 bit).  I went online and tried to reinstall the software C4380.  The software seems to be installed, but my printer looks like a rectangular box "unspecified" in the peripheral topic instead of a printer under "printers."  So now I have no printer.  How can I fix this problem?  Thank you.

  Hi EvelynMae,

  Welcome to the HP Forums! I see that your HP Photosmart c4380 software fails to install on Windows 7. I am

  happy to help you with this problem! I have a few questions for you:

  • Can you make copies with the printer?
  • Did the cable feed plugged directly into the wall, or a surge protector? Questions when it is connected to an uninterruptible power supply/Strip/surge protector power.

  In the meantime, I'll try uninstalling the softwareand then re-install again, using the printer HP install wizard for Windows.

  I hope to hear from you and have a great day!

• Failed to install graphics Win 8.1 on Dimension E520

  Hello

  I just bought a 'new' E520 and tried to install Windows 8.1 with the x 1300, ATI video card (onboard).  However, immediately after the 'Windows of the Pavilion' bootscreen, my monitor stops showing a message "Input not supported".

  I adjusted the appropriate video BIOS settings in all possible combinations, I even tried to swap hot video card!

  I tried to install the ATI drivers whist using the integrated graphics card, but he got the message without surprise "no supported hardware detected.

  I thought I might be able to use the Safe Mode, built-in option, to start with the parameters of low resolution and then install ATI, but got the same message "input not supported".

  I restarted with all combinations of parameters in order to cold-swap (if there is even one thing) the ATI card.

  All to no avail...

  So I'm stuck with integrated VGA, unless a genius (which is one of you) can provide a way to install the video card drivers before installing the video card.

  Thank you...

  This card may be unsupported for Windows 8.1. You may consider replacing the card with something more modern.

• Photoshop fails to install on win 8.1 - not relevant system updates

  Hello

  The message I got was simple: updates of windows to install this product are not available. I clicked on "more information" and got download and install microsoft updates.

  Visual C ++ Runtime 2015

  and its prerequisites:

  Windows RT 8.1 8.1 of Windows and Windows Server R2 2012 update: April 2014

  I have a 1 - year computer, with a windows updated frequently 8.1 so it wasn't a surprise, I could not continue with these updates, because they were already installed (I received: this update is not applicable...); Any thoughts? should I buy photoshop before you try to install it just via the desktop application?

  Thank you.

  Hi Barakk12067319,

  As you mentioned you tried to install the update, but it gives an error that the update is already installed. I recommend you to uninstall Visual C++ Runtime 2015, see the steps on how to do it in the slot help document:

  Errors 'Exit Code 6' and 'exit 7 "Code install Adobe CS6, CS5.5, CS5, Premiere Elements and Photoshop Elements.

  Once uninstalled, use the link below to download and install Microsoft Visual C++ Runtime 2015 manually:

  Download Visual C++ Redistributable for Visual Studio 2015 of the official Microsoft Download Center .

  Let us know if that helps.

• Satellite C50-A630 - start problem - cannot install OS Win

  TOSHIBA
  MODEL NAME: SATELLITE C50-A630
  P-N3520/4G/500G/15.6HD/DVD
  PART NO. PSCJGV-00400LAR
  SERIAL NUMBER 1E052899U
  CPU TYPE Intel (r) Pentium (r) CPU
  N3520
  THE 2.16 GHZ PROCESSOR SPEED
  Total memory 4096 MB
  System BIOS Version 1.10
  THIS Version 1.00

  I bought THE TOSHIBA MODEL NAME: SATELLITE C50-A630 without windows inside
  Now I am trying to install windows, but it has problem with starting.
  His boot not get FLASH DRIVE or CD ROM just showing, CHECKING THE MEDIA TWICE, then gives a message that there is no media device, please restart,

  Please help me on this problem

  Hello

  Do you have what system tried to install?

  The point is that Toshiba Satellite C50-A630 was equipped with the Intel Pentium processor * N3520 * belongs to the new * Intel Bay Trail * standard.

  It s a new technology that allows the use of systems capable of UEFI as Win 8 or 8.1 Win

  Failed to install systems that don t help UEFI mode.

• 2829361 update fails to install with error 0x80070005 - Win XP SP3

  KB2829361 Windows update fails to install with error 0x80070005 - Win XP SP3

  Thanks for the reply, but I reinstalled Outlook 2003 and that solved the problem.

• Instalation of Win 7 by USB - Windows error 0xc000000d was able to start

  I am running a fresh install of Win 7 in. of USB and when the boot from USB, I get this error:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \EFI\Microsoft\Boot\BCD

  Status: 0xc000000d

  Info: an error occurred trying to read the boot configuration data.

  This is a new laptop with Win 10 preinstalled. The BIOS is the UEFI mode.

  I need Win 7 because some software that I use for my work has not been tested with Win 10.

  A system UEFI-based systems, you must disable the Secure Boot UEFI in order to use Windows 7.

  To learn more:

  How Downgrade Windows preinstalled 10 for Windows 7/8.1

  In addition, you can dual boot instead:

  How to: Dual Boot Windows 7 or Windows 8 with Windows installed 10 first

• I tried to download trial version of photoshop on creative cloud. 42% the download stops and the program starts to extract the files, BUT when it's done, he says failed to install. When I click on more information ot says: fatal error: "Microsoft C++ R pa

  I tried to download trial version of photoshop on creative cloud. 42% the download stops and the program starts to extract the files, BUT when it's done, he says failed to install. When I click on more information ot says: fatal error: payload "Microsoft C++ Redistributation Pack 2010 (Code output: 34)." Can someone help me please?

  See link below:

  (Exit code: 34 please see specific errors below for troubleshooting.) For example, ERROR: - Summary - 1 or fatal errors, 0 FATAL error: "Microsoft Visual C++ 20 payload.

• CS6 install fails to boot on Win 7 PC

  CS6 install fails to boot on Win 7 PC. Have tried the CS cleanup tool, installation of the admin, download Application Manager account separately and checked the installation media. The PDApp.log display PIM errors; Failed to load updaterInventory library, error in _pimCreateAndValidateUpdateInventoryLibrary, Setup - impossible free PIM items. Any help appreciated.

  Hi karima,.

  Please navigate to:

  Program/C Files(X86) /Common Files/Adobe/OOBE and rename it to OOBE.old

  Program/C Files(X86) /Common Files/Adobe/Caps and rename it to Caps.old

  Run the installer and try to install. If the error persists, then download and install again.

  Kind regards

  Romit Sinha

• Win anytime upgrade Windows 7 home prem 64 bit to Ulitmate - unrecognized failure + prod key.

  I have a fairly new laptop np700g7c from Samsung that came with OEM Win 7 Home Premium.  I discovered that too late that this version of Win 7 does not allow backup to NAS - just will not see my SIN.  Apparently this only possible with Win 7 Ultimate (I got on my last computer so no problem) or professional.
  To help to win anywhere, anytime upgrade on computer, I checked if I could upgrade my 64 bit Win 7 Home premium to Ultimate and am OK for Ultimate or professor.  I downloaded the Win 7 Upgrade Advisor tool, and the report said I could upgrade to Win 7 Prof or Ultimate.
  The use of Win Anytime upgrade I paid £127,07 GBP for the upgrade to Win 7 Home Prem to ultimate and received the Upgrade button and it printed properly.
  Clicked to level and product key is automatically applied.  Soon, she returned this upgrade has failed.  Suggested try again.  When I tried again my product key was not recognized, so installation would not start.
  I paid my money and can get nowhere.  I feel also "had" that I can't use backup for my SIN in the first place, but I gritted my teeth and paid my money but now have lost money AND cannot be upgraded and am in a complete mess.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions.

  I am running XP it and suddenly had 4 Windows updates fail to install it on 3 separate occasions. Failed updates are as follows: "Security update for MS Core abuse 4 SP3 (kb2721691)" "Security Update for MS NetFrame Work 3.0 SP2 on Windows Sever 2003 & Win XP x 86 (kb2656407)" "as last but Frame Work 2.0 SP2 & (kb2604092) ' and finally 'as last but (2604110 kb)" How can I get these updates installed? "

  Hello

  Thank you for your response.

  Safe mode is different from boot were the clean boot will help disable you any of third-party applications or starting points which is the source of the problem.

  Also I suggest you to see link below and check if it helps.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798/

  Hope this information is useful.

• The updates that fail to install.

  For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

  For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

  Do not jump.  Even if you know that you did 30 seconds before you are about to do again because you are being asked to do things.  In order...  Wait as this to blow up your weekend.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (if given the choice, you * will * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Win Premium upgrade Starter

  I just paid Bill Gates $140 for a product key to upgrade from Starter to Home Premium on my laptop Aspire One, just to be told that there is a 'mistake' with the installation. If anyone has had this problem and know how to fix?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Windows update fails to install with error 57F

  Since June 11 3 updates of MS - Office Outlook KB 970011, MS Word KB 969603 & MS Excel KB969681 failed to install. The error code is 57th
  This happens every time the pc is switched on/off.
  I tried to install manually via start / all programs/windows update but it also fails
  running Norton anti-virus software

  Hello Mcleod233,

  Thanks for reading, I appreciate it.

  It's great to hear.

  Hooray! Uday $012 please let me know if the solution worked or not I can improve, I thank you and appreciate your feedback, because it's the only one I can see I can improve.

• automatic updates fail to install.says 6 updates pending installation but when I click on install after installing it says cannot install updates gives 643 and 646 error codes

  need help for the automatic update of work again.has has not worked since October 16. gives error 643 and said 646.IRV 6 updates waiting to be loaded, but when I install and it does its thing, sometimes failed to install updates and gives these errors.clicked on the start menu where it says shuts down your computer and install updates but auto update still does not work

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.