Failed to install wireless for HP c309a printer.

Error than HP C309a all-in-One printer cannot connect with my Netgear WNR834B-1 wireless router. Diagnosis says that she does not "No filtering." But the filtering of MAC addresses on my Netgear router is disabled. And even when I turn on and include the MAC address of the HP C309 printer in the list of acceptable devices, I get the same error message. Any suggestions?

Try changing the channel of the router 11. If the option automatically select the channel is checked, uncheck it and then change the channel to 11.

Tags: HP Printers

Similar Questions

  • Failed to install wireless

    Try installing a L7580 as a printer wireless on a Macbook pro.

    I opened the airport and insert the HP installation CD.  The installer through the acceptance of the user license, and then loops indefinitely when it reaches the HP customer Participation.  If you check Yes to accept or no to deny, Setup goes to the installation screen.  Then, all you check, it refers to the question of the Participation of HP customer.

    The work of printer very well on a wired connection to a PC and also wireless with a PC.  And the Mac works perfectly with the wireless router.

    No work around?

    Thanx

    The problem was solved quite simply.  First, store the instructions from HP.  They are evil dead a Mac.

    Then take the installation CD and throw it as far as you can, preferably in traffic.

    Start at the airport, disconnect from the wireless network, then reconnect.  Then click on hardware, printers, then install a new printer.  The Mac will do the rest.  Takes 30 seconds.

    Good luck.

  • HP Deskjet 2540: I can't find password wireless for the new printer!

    Hello

    I am very confused because I bought this new printer and I have downloaded the software application in my I touch, I went in wi - if parameters and found the printer but it requires a password I can't find it anywhere.  The manual says I have a find the password on the 'use printer wireless without router page' but I can't find it anywhere.

    can someone please help as soon as possible

    Thank you

    Hello and welcome to the HP support community!

    The information you are looking for is on page 53 of the User Guide:

    Connect to the printer without a wireless router

    HP wireless direct allows your wireless devices such as computers, smart phones, tablets and other

    Wireless, to connect to your printer directly over the wireless network, using the method you

    currently use to connect your wireless for hot spots and new wireless networks. With HP

    Wireless direct, you can print directly to the printer wireless, a wireless router, of your

    wireless device activated.

    To connect to the printer without a wireless router, press the button wireless directly from the printer

    Control Panel. If this is the first time you turn on the HP direct wireless, how Connect information

    page will be printed. Follow the instructures on printed information page.

    NOTE: HP direct wireless with security is enabled by default when you turn it on. The HP wireless

    direct password can be found by printing information page.

    NOTE: The information page are not available in all languages. It can only be printed

    automatically when you first activate wireless HP direct.

    To print information page, press in and hold the button wireless live for more than 3 seconds.

    If direct HP wireless is enabled, the Direct wireless status light is solid on.

    WyreNut

  • failed to install wireless 4622

    Bought a 4622, trying to set up wireless.  I use the installation software and the wireless configuration wizard, it contains.  I choose my network, enter the password, then it will fail to configure.  The error message indicates that there are two networks with the name of my network and wants me to choose another network.

    If it fails every time.

    I have several routers, unique SSID.  All other devices I have connects to all routers without problem.

    I have no idea how to proceed.

    Is there another method to configure the other wireless that I connect my computer to the USB printer, running the installation and attempts to put in place the wireless?

    No idea how to solve this problem of "several networks?

    Thank you.  Didn't try it.  I used the router to make WPS button. Much easier to use the installation wizard.

  • Failed to install diver for any external storage device

    When I connect my USB or external driver or my cell phone from windows/anriod, an error message prompt showing the driver installation failed.

    When I've tried, but still the driver installation troubleshooting fails saying access denied.

    The report is displayed as follows:

    Hello

    1. don't you make changes to the computer before the show?
    2. you try to install the drivers of local account or administrator account?

    I suggest saving the drivers on the desktop .exe file and run this file as an administrator and see if that helps.

    How to apply once with a full administrator access token?
    http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-run-an-application-once-with-a-full-administrator-access-token

    See also the link: "Access denied" or other errors in the access to or work with files and folders in Windows
    http://support.Microsoft.com/kb/2623670/en-us#method4

    I hope this helps.

  • Failed to install Java for windows 8.1

    Downloaded to the desktop.

    When I click on install this is what I get, and will not be can not go further.

    How do you open this type of file

    Search for an app in the store

    more options

    Thank you

    Leo Graham

    I really don't like window 8 it's awful

    PROBLEM SOLVED.

    use Firefox, 1st successful attempt

  • Dist. Kit fails to install, a newer version already exists of reports

    I'm with CVI 8.5.1 on Windows XP sp 2.  distribution kit fails to install executable for a project, sites that have a newer version already exists.  However, previous versions did exist on either the c: drive or that they appear in the Control Panel Add / Remove programs.  Any ideas?

    Rick

    The installation program is to find indications that the release 1.0.14 of your software already exists on the system. If this is not true, then he could have some problems when uninstalling this version. If you search your registry database for the product code {7D8D2E0B-CEB1-44D0-A081-1B0C039F9157}, I'm sure you'll get some hits. If the software cannot be uninstalled from Add/Remove programs as you say, then I recommend to use the enclosed MSIBlast utility to remove the order of it. Unzip and run the program, and then check the box "Display all installers" at the top. Find your software (by name, but check the product code) in the list, and then uninstall it. Be very careful when you use this utility that you uninstall the right thing. You don't want to accidentally delete something important.

    A. Mert

    National Instruments

  • Cannot install the all-in-one printer

    Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

    System Windows 8.1

    I uninstalled printer because had message printer disconneted.

    Check the devices & printers in the control panel

    Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

    I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

    According to HP print and scan the doctor 4.3

    The following products are visible from your computer

    HPDD4BE7 (HP office jet 4500 G510g-m)

    connection: network

    software requirement: installed

    I tried to print but prints blank pages

    I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

    I have good HP office jet 4500 G510g-m printer installed?

     

    Troubleshooting report

    Problem with the yellow triangle detected printer with an exclamation mark inside

    There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

     

    Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

    First step: rename the .dat files in the Windows folder

    Search box, type % windir %

    No adjustment results found for your search %windir%\System32

    The first step is not a solution

    Second step: download and install the software from the HP site

    Not a solution: when click on get installation message: the system cannot find the specified file.

    You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

    question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

    I have no problem, download and install any software but

    HPDD4BE7 (HP Officejet 4500 G510g-m)

    I did the test HP officejet 4500

    Green connection box

    device status green checkmark

    I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

     

     

    Ok

    Please try the following steps:

    1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
    2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
    3. Type %windir% , and then click OK.
    4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
    6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
    7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
    8. Launch the dialog box run by following steps 2, type % temp % and click OK.
    9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

    Please follow these steps in the exact order, is there a difference during the installation of the software?

  • C309a printer driver fails to install, the drive M: on Windows XP

    C309a printer driver tries to install my drive M: on Windows XP.  Automatic installation of HP fails because the M: drive is not valid.  What should I do?

    Hello ChappyD

    If the problem is not with the printer but the computer that you got with the Agency. It seems that he may have had only a M:\ drive on the computer before and default installation of this drive that is obviously not valid, windows tries more based on the list of drives you provided previously.

    At this point, the best solution would be to re - install Windows on the computer.

    However, before you reinstall Windows try the following:

    1. Open the command prompt
    2. type: 'subst M: C:\. "without the quotes and press to enter.
    3. Restart and try to reinstall again.

    SOURCE: Officejet Pro 8500 wireless Error Message Invalid drive F: /

  • Trouble installing software Cener Solution for C309a printer all in one

    I've had my C309a printer for a few years now and it has worked well.  My old computer died and I had to get a new one.  I have problems to get the installed Solution Center software.  I am running Windows 7 64 bit.  I downloaded the latest software from the hp Web site.  I followed all the steps as instructed.  The printer is recognized and I can print from Word.  I can't get the solution center to load.  When I run the installation of the software on the HP website (PS_AIO_05_C309a_Net_Full_Win_enu_140_047) it goes through all the steps, but hangs at the end, then a "fatal error-wStub 459426" appears.  An error log is produced, followed by a placed file on my desktop named "HP Installation error - Windows 7".  I followed all the steps up to the wired installation step 2 D.  That is to turn off anti-virus firewall and anti and software programs.  Same error message with a different number after '-wStub ' fatal error message.  I'm at my wits end here.  Installation install photosmart essentials 3.5, but not the Solution Center software.  I need this to scan my documents!  When I try to scan from the console printer, I get an error message on the printer cannot connect to the computer screen saying.

    I have downloaded and run diagnostic printer HP program tools, print and scan the doctor, who tells me that I need the Solution Center software installed.  I don't type what I said to a diagnostic conclusion.  I followed the steps in this program without success either.

    I'm completely puzzled here. Can someone help me?

    Do not hesitate to send an email directly: [personal information deleted]

    Jeff

    Yes, I would recommend going through the uninstall of the printer of all these places, we went in front. Clean every time we go a little deeper and making one further.

  • On HP C309a printer wireless test page is printing ok

    On HP C309a printer wireless test page is printing ok, all the other tried printing out a blank page, I have updated files all the drivers and software for this printer - no success

    No problem ink, more with 2 computers on my network printing is very good

    So far, no error found runs the network check...

    Please, any advice

    Thank you

    Hello

    1. what operating system is installed on the computer?
    2. don't you make changes to the computer before the show?

    I suggest you try the steps from the following link:

    Question printer prints white sheets of paper
    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&LC=en&DLC=en&product=3737195&tmp_track_link=ot_search#N47

  • HP USB and wireless Lan update failed to install

    my USB hard drive can not be found and I noticed the Intel USB 3.0 extensible host controller FAILED to install the software update and also the Ralink Wireless network driver update / LAN also failed to install, I tried other USB hard disks, and they can also be seen, whats the fix for this please Thank you

    Well, it's different, I went to the control panel and found find and solve problems and clicked on it and went to the configuration of a device and ran the troubleshooting and it says problem found hardweree changes could not be detected...? which is weird, but Defected said... and it seems to work fine now, I listened to 2 and 1/2 hours of music and watcthed 2 complete movies and it seems to work fine now so there was me but still pretty strange thing that can happen thank you for your help and all who responded ) soon )

  • Photosmart C410A: HP Solution Center install on 2 PCs for the same printer

    I have two PCs running Windows 7 Professional 64 - bit and a HP Photosmart C410A printer, wireless connections to my network.  The solution Center has worked well on the first PC, it was installed on.  I tried to install it on my new PC, but I get an error on USB hardware and software; It will not attempt to connect and install wireless.

    My question: can you run Solution Center HP of two different PC for the same printer Photosmart C410A?

    Thank you.

    Yes,

    You can install the HP Solution Center software on several computers connected to the same netowrk as your printer.

    Try following these steps to solve the USB error during installation:

    Click the Start button and type folder in the search bar, then open the Temp folder indicated.

    Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
    Open the installation folder.
    Find the file usbready.exe and rename it to usbready.old.exe
    Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

    Now follow the installation and check for the difference.

    Kind regards
    Shlomi

  • Printer HP 7640: install updates for the printer

    downloaded dates for fails printer HP7640, all other updates for windows 10 install normally. How can I fix it?

    Hi @John34,

    Welcome to the HP Forums!

    I understand that you can not install updates for your HP 7640 printer, and I'm happy to help you!

    Please, try the procedure described in this guide, get the latest Firmware and updatesand let me know the results!

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this guide helps!

  • Cannot install wireless driver for Satellite A40

    A few days ago I had to reinstall the OS windows (XP) on my laptop. Since then, I'm not able to get a WiFi connection. I tried to install the driver on the CD that was in the package, I got when I plug the laptop, but the installation failed. I am able to get internet with a LAN cable, however, the only type of access provided in the College, I screw is wireless, so I really want to make it work again.

    There is no option for a wireless connection when I click on "create a new internet connection". However, through the program "ConfigFree" (included in the installation package) I know that my wireless adapter cannot "see" the wireless network. In addition, when I click on "view available wireless connection" icon of the internet wireless next to the time, it shows nothing.

    Really, I don't know how to run again and would be pleased if someone can help me.

    Kind regards
    Katerina

    Hello

    I'm a little confused about the description of your problem full of m.
    First of all, it would be very interesting to know if you have used the WLan in the past!
    Did you use WLan on this laptop?

    I searched a little on the net and didn't find any A40 with the installed wireless card!
    Please check under network adapters Device Manager if a wireless network card or an unknown device appears.

    If it s not available under network adapters, then your laptop was not equipped with the LAN card internal minPCI!

Maybe you are looking for