Failed to load the operating system

Similar Questions

• Failed to load the operating system. Error 0xc000000f

  Hello!

  I got an error 0xc000000f in Windows and it did not start.

  I have a HP DV6 laptop with a pre installed WIN7 Home Premium OEM.

  I tried to use the LIVE CD of Ubuntu Linux and it works!  So I think this isn't a hardware problem.

  But how do I get a recovery for my WIN 7 disc?  How can I retrieve my previous operating system?

  PS Sorry for my English, I'm from the Italy.

  Prego.

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• How to make a copy of XP for a HP Mini. Seems my OS is corrupted and I need again to load the operating system.

  My children HP Mini won't start. Just triies, flashes and displays gray screen with cursor flashing at the top left, then repeat the cycle.

  I think I need to reload Operatin System.

  Where can I find a copy of the operating system at a reasonable price?

  It should have a method to restore it to factory settings.  (In your words, "recharge system operatin".)

  I think, if I'm not mistaken (although you have the HP Mini is still unknown) you can turn off the machine, turn it on and start typing "F11" once per second as soon as you turn it on.  Then, you should get a menu and one of the options should be "System Recovery" - or it may simply start.

  Or - if this does not work:
  Order of the recovery disc for Windows 7, Vista or XP

• Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

  Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

  Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

  I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

  First thing I did was a fast hard drive test and it happened.

  I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

  Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

  I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

  Thanks Bill

  Hello:

  See if you make your own plain W8 x 64 installation media works for you...

  Download the ISO W8...

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

• BOOTMGR is missing message when you try to load the operating system on the new hard drive. How do I get past this?

  I had a bad hard drive and replaced. When I turn it on now to load the ISO of Windows 7 disc, I get the message: BOOTMGR is missing / Press Ctrl + Alt + Delete to restart.

  I tried, but it just comes back and won't look at the CD/DVD drive to start loading Windows 7. What should I do?

  Check your BIOS settings, the CD / DVD drive must be set as the 1st boot device, then the hard disk as the 2nd boot device. Exit and save your changes in the BIOS. Insert the Windows 7 DVD and restart the computer, then you should see a message "press any key...". "to start from the DVD, press the space bar and wait for Windows to load from DVD, then follow the instructions in my first post.

  J W Stuart: http://www.pagestart.com

• Satellite A100 loads the operating system correctly after the recovery procedure

  Hello

  I'm in trouble... I used the recovery CD last week after my laptop developed problems. After the recovery procedure, when I turn on the pc, it loads directly in mode 'Owner' - the pilot of the internet has no charge, Norton AV, supplied with the pc does not load. Basically, it's a shadow of his former self.

  And when I try and start the recovery process, that it doesn't... it does not read the disc.
  I know that the recovery process did not work properly cos when I look in C: it shows that 60 GB of data is present on the hard disk, so the recovery is not cleaned the hard drive at all.

  The only way I can describe it, is that the pc is in some sort of limbo. I can't access the original account I created.

  The recovery disk is still okay because I "explored" the drive on another computer and it contains all the data.

  Help, please.

  Looks a bit the problem I have with an A100 recovery disk. Mine formatted PC, unpack
  a load of stuff and then freezes.
  See...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31292

  Like you, I can read the DVD in another PC. I wonder if there is a batch of duff of recovery DVD?

  I think I'll try to install XP from a different installation disk. It'll be a bit of a pain in the neck
  because it will not authenticate with MS, but at least he's going to prove whether or not the hardware of the laptop is duff.

  I'll post back here when (if) I get anywhere.

• Failed to retrieve the operating system error 0xc000000f

  original title: I keep trying to re install recovery disks on my laptop HP 530 of the code Oxc000000f error, then used my laptop to run it stops

  Ahh why me

  can someone help me please

  You should contact HP technical support to find out why their recovery system will not work properly.

  "jacqui49" wrote in the new message: * e-mail address is removed from the privacy... *

  Ahh why me

  can someone help me please

• Pavilion 500-281: where to install a SSD and the best way to get the operating system on it

  I have a Pavilion nine 500-281 with Win 7. I bouight a SSD 128 GB to load the operating system on it.  Where can I get inside the chassis? It seem not to be berries of classical records. It came with an adapter with the screw plate, but it's not obvious where I was able to ride the thing!

  In addition, can I just run a restore to get the OS on the SSD drive, once I have installed?  I received instructions with the SSD for ADATA software copy an image of the disk, but all I want is the operating system.  I'm dying to start using my new computer, but I think I want to get the reader installed first before you make any changes that he.

  Hello

  Review the #8 message in this thread.  Not all models of the 500 - 2xx Pavilion are provisioned for the SSD in the location as shown.  In the indicated installation, an adapter plate was not necessary.

  Most SSD manufacturers have free software migration.  I suggest that you image the entire HD, all partitions even hidden partitions.  Some of the more recent migration software will allow you to exclude your data records.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello. I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove my hard drive and reload the operating

  Hello.

  I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove from my hard drive and reload the operating system with all the updates and load to the top of my existing software. All my software works except my Photoshop CS3, which I use most. I loaded the software disc and download online. The system of charge very well and activation is complete.  Here are the main things that don't work properly, I have noticed so far. First of all, I can't open my camera RAW (I can with my Lightroom software, but not with my Photoshop software?). So I can't open any of my files of digital camera? Second, I can open a .jpeg file and use the Photoshop software and I can save the changes, but when I turn off my calculated the software doesn't seem to be on my computer. When I go to Windows ' search program and files "software is not located here. When I go to "Uninstall" the software of the foldername is there it is. "Photoshop CS3" but there isn't any size file to it IE 400 MB, while my software "Lightroom" on the 'uninstall' section will have a file for example size 400 MB tied to it. Thirdly, I also have a photosoftware of B + W, which operated in Photoshop; It's "NIK software - Silver Efex Pro" and it is located in the subtitle of 'filter' of Photoshop CS3. I use Silver Efex and all functions are working properly, but I can't save the file, it does not save the changes to save.

  Please can you help me.

  Thank you.

  KEith

  Try the forum for Photoshop.