Failed to load the user profile on my Satellite C855
I get the following error message when you try to log-in to my profile:
"The service user profile Service has no logon. User profile cannot be loaded. »
I tried to reboot several times, and I know that it is the password. Anyone has any ideas please? Thank you.
Check this Microsoft Fix for the solution.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
It will show you the solution how to fix a corrupted user profile
Tags: Toshiba
Similar Questions
-
Failed to load the user profile on my Satellite L840
I have a Satellite L840 and when I logged on today that it's telling the user profile service service (it says service twice don't know if this is important) failed to connect
User profile cannot be loaded.Can someone tell me how to solve this problem?
Thank youI never had this problem but to check first what Microsoft says about that - please http://support.microsoft.com/kb/947215
Maybe it will help you. -
the user profile Service service has no logon failed to load the user profile
I received the following message when I try and log in my account to have:
The user profile Service service has no logon failed to load the user profile
What are my options?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
"Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please
Go to Safe Mode and do a system restore. See the link below:
The user profile Service has not logon. User profile cannot be loaded
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8Follow the links on the post.
-
Failed to load the user profile on my laptop. Help
I can't connect my laptop as his watch the above message, it is 2 years and a half old and isa an inspiron 1525, helps, I know I need to re boot, but as I am not too good with the system and was looking to find out where to download a disc and make sure that I get the right one can someone help me. in my library now wiyh a ubs if I need.
Next time please post the error message in its entirety... verbatim.
What is the real error message?...
Failed to load the user profile and the user profile service does not log
If Yes, read on...
You haveanother admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
How to restore the system:
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" applicationFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Error message: "the service user profile service has no logon failed to load the user profile.
Unable to connect.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947215#letmefixit
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip. It is on the login page. My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.
I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files. How can I fix the desk top to coinside with his status of being online. Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.
Home Group is Windows 7.
Here is the Vista Forums.
What operating system do you use?
Vista info below:
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
I CAN NOT LOG - ON
I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
user profile srevice has no logon. User profile cannot be loaded. only have a profile on the pc, windows vista. I tried f8 @ start upward and just takes me to the photo of profile and the password box. ???
* original title - user profile service does not logon, user profile cannot be loaded: only have a user profile on my f8 computor.tried @ start up and takes me just for the photo box and user password? *
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My Toshiba Windows Vista says that failed to load the user profile when I try to log in.
He said also the user profile service service has no logon. I have not changed my password.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Vista said the «failed to load the user profile» user login
I looked on the site to see if others have had this problem and that they have. To resolve this problem said to press F8 at boot and choose Safe mode. I tried this and once I press f8 all that happens is kette - drive 0 see a failure. I have no idea what this means and nobody had this problem here before, so how can I fix this so I don't have to take my computer to a best buy and pay for repair
Hello
See the following message if necessary, and then return to it if the problem is still present.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.
Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Failed to load the user profile service service profile has no logon__User
I have that a user account on my laptop so cannot open a session with another user. How can I get beyond what I can do nothing on this computer.
I have Windows 7 update ready to install if I try and install this will be sold problem but I'll lose all the data on your laptop.
I have that a user account on my laptop so cannot open a session with another user. How can I get beyond what I can do nothing on this computer.
I have Windows 7 update ready to install if I try and install this will be sold problem but I'll lose all the data on your laptop.
2 ways...
1. click on this link: http://www.vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html2. do a system restore. Choose the date you are to log in under your restore point.
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlNote: It is always a good idea to have 2 admin accts, where we're going poof.
t-4-2
-
User profile Service service has no connection, failed to load the user profile"
I tried the fixes by Microsoft, I found. However, the vast majority only works when I can go beyond the logon screen and get the Start button. I can't do it. Help! It is my mother's computer. She is now 86. I KNOW that she has done nothing to have this problem. She goes crazy when she receives a message on AOL. I can't, and I'm frustrated. I am very good with computers, but can not get it.
I tried the fixes by Microsoft, I found. However, the vast majority only works when I can go beyond the logon screen and get the Start button. I can't do it. Help! It is my mother's computer. She is now 86. I KNOW that she has done nothing to have this problem. She goes crazy when she receives a message on AOL. I can't, and I'm frustrated. I am very good with computers, but can not get it.
Follow this tutorial:
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlNote: Read the step 1, #2 in the boot in safe mode and enable the built-in administrators.
t-4-2
-
I am not able to log in as administrator. How can I work around this to solve this problem?
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
Can someone please help soon, I have to finish a project that I can't do without my files. I tried several times to log in to my user account, but it keeps showing an error message. I typed my password and the message is "service user profile Service has no logon. User profile cannot be loaded. I tried to restart my computer, the file sharing with another person on this computer to try to access my files, but nothing seemed to work. It just happened all of a sudden, yesterday I was on the computer and turn off the computer for the first time in a while. Before as I would just close the laptop, so I would not waste time log. But today I tried to open a session and received an error message and I can't connect to my user profile. Help, please!
Hello
· You did recently changes to your configuration?
Try to follow this link: http://support.microsoft.com/kb/947215
Maybe you are looking for
-
Cannot install Windows 8 on Satellite L750 - CPU compatibility problem
Why can I not install Windows 8 Preview of consumption on my Toshiba Satellite L750-22 x?I get an error of processor compatibility. Intel i3 M380 2.53 GHz
-
Vista 64 Ultimate on Satellite X 200-23 G?
Anyone who has tried to put Vista 64 bit on one of these X 200? I really can't stand the 32-bit version and would really like to upgrade, but impossible to find on the web that he tried. Any info would be gratefuly received, thank you.Steve.
-
Satellite Pro P300-20 q - I need 64-bit XP drivers
Hello.We are dealers Italians. We, our customer bought a Satellite Pro P300-20 q PSPCDE-01V003IT, he needs 64-bit Windows XP to work. We can not find the drivers for these devices:Audio device on High Definition Audio (Conexant) Bus(AuthenTec) finger
-
Does anyone know if you can order as a T450s with Windows professional 10 easily instaled?
I wondered about the laptop T450s-can buy you one that is installed with Windows 10 professional?
-
connection failed: invalid security lookout file
Computer has declined due to power problems. When it came to lookout 6.5 has a login prompt. When you try to connect you get I tried to reinstall lookout and always is happing. Win7 64 bit operating system