Failed to open all the files, they are all displayed as. INK files and asked what program to open it with Windows 7

Similar Questions

• "windows cannot open the file must know what program - program list selection" when tried to open the file

  After a problem with my sony ebook reader, I was told by the library to remove the program Sony and library of books on the computer and the drive, and then reinstall the program.  I would then be able to download the books again.  But now I have a message saying that windows cannot open the file must know what program - select the program from the list. When I click on the program sony player list is not there.  What I am doing wrong?  You can give me some advice.

   
  Original title: Pauline1949

  Hello

  1. have you downloaded the right file to library?

  2. What is the file format of the file that you downloaded?

  3. What are the recommendations of programs that provided by Windows?

  4. have you installed the player from the computer program?

  5 is this problem confined to a particular file that downloaded?

   
  The file that you downloaded requires an appropriate program to open it in Windows. That's why I suggest to check again if you have installed the reader program and also check if you have downloaded the appropriate Center books.
   
  Reference:
  
   
  Reader store
  http://eBookStore.Sony.com/
  Player for PC
  http://eBookStore.Sony.com/download/
   
  If you have installed the right program and download the correct file in the program. I suggest you to change the player to default programs in Windows.
  Reference:
  Change the programs that Windows uses by default
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
   
  I hope this helps.

• Edge animate Installation failed, impossible to extract the files.  (EX20)  What should I do?

  Edge animate Installation failed, impossible to extract the files.  (EX20)  What should I do?

  After I wrote this, I have the figures on the issue. I had uninstalled edge animate but not Edge... I uninstalled Edge and that fixed the issue.

• transfer all the files from a hard drive to new Hardrive with windows and office suit

  I tried to transer all my programs files again hardrive but without success using easy to migrate acornis.

  Will I need to reinstall Office

  Depends on if you have followed the instructions, immediately after the migration/clone that you will need to shut down the pc, replace the old disk with the new (leave the old disconnected) then restart. Assuming that all is OK, you then stop and connect the origonal HD as a slave, before the abolition of its partitions and then create a new.

  Office "may" need to be repaired, to a certain extent depends on the version.

• How can I recover the files and programs before a system restore? my document folders are all empty and my programs will not open!

  How can I recover the files and programs before a system restore?  my document folders are all empty and my programs will not open!

  I know they are there and hidden somewhere, but this restoration took my settings of the computer to 2004! We lost all our data, our software that we use to operate our company at home, our quickbooks that has all our financial data, family photos, videos, Outlook will work not so no e-mail, all turned in time and 6 years ' worth of documents have disappeared.

  What happeneded was that I was trying to upgrade to quickbooks software when I got an error, I cancelled out of the facility, then restarted and that's when I got an error hal.dll something? I thought about a system restore would allow me to go back in time to just before when the error occurred, but he basically took my computer back to factory settings, so all the programs that I installed and paid hundreds of dollars for the past six years has disappeared, Microsoft Office and very expensive construction estimating software that we wil have to pay once AGAIN for If I can't get this program working properly.

  I am a fool! I can't believe what's happening.

  Someone at - it instructions on how I can retrieve either the programs and data that I need specifically or how to go and seek shade from the files I read online on and restore my computer for about 12 hours ago?

  Thank you all!

  Sally in Georgia

  Looks like you did a system rather than a system restore recovery.  If you have inserted a disc supplied with your machine and booted from it, you probably erased the disc and installed the original operating system provided with your computer.  Usually, a step in this recovery is to do a full format or quick of your drive.  If you did a full format, your data is permanently lost.  With a quick format, your data may still be there, somewhere but inaccessible by normal means.  Applications must generally be installed, in order to recover the files probably will not help unless you have the original installation media.  Your other data files (images, videos, financial data) may be salvageable, but at this point, it would be advisable to take your computer or your disk to a business/professional who is experienced with data disc recovery.  It will be cheap and there is no guarantee.

  Impatient, remember investigate you a backup strategy for your computer and critical data.  Hard drives can go wrong with little or no warning.

  HTH,
  JW

• When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST. How to change this default setting.

  When I open the files they are always displayed as a default icons, I would like to change the default setting so my files are displayed as a LIST.  How to change this default setting.

  Hello combat

  
  Open Windows Explorer/Tools/Folder Options

  On the general tab, click the options you want.

  In the view tab, click the options you want.

  On the view tab, click apply to all folders.

  Click Yes, then OK
  
  .

• Failed to open all files with the extension .exe in Vista Business SP2. Dialog box appears and asks which program to use. Seems to have lost the info file assoc after virus removal.

  Failed to open all files with the extension .exe in Vista Business SP2.  Dialog box appears and asks which program to use.  Seems to have lost the info file assoc after virus removal.  Any suggestions?

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  Try the fix it or follow the manual for troubleshooting to solve the problem.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Note:

  The link above contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  Method 2:

  Download and run Microsoft Safety Scanner and check if the problem is caused by a Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64.

  PROBLEM WITH MY LAPTOP CONFIG AND SYSTEM.

  I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64. It has been preloaded. I am VERY confused!

  When you view this file.

  If you check through the Task Manager > processes (tab) some will note * 32 because they are native 32-bit applications running on a 64-bit operating system.

• Cant unninstall lightroom 5.4 required to install update 5.5, I remove all the files and registry, but install fails

  Cant unninstall lightroom 5.4 necessary to install update 5.5, I remove all the files and the registry, but installation fails again and again, now I can't use lightrrom... Grins.

  I use the SSD drive and I can't have a lot of file uninstal (often having to clean disk)

  Thanks for help

  Hello Jeff,.

  Thank you very much for your reply, I use windows 8.1! I found the problem: to install the new version installation needs the program old installation (but I have remove all the installer, because they use a place a lot on hard drive (SSD)).

  I have uninstall all Adobe and reinstalled, I save the full installer on an external drive. When the installer asked the former installer I indicate to programm my drive external and everything works fine now.

  Thanks so much for your help, I just do not delete the old file (sad having to save old installler just to install the new).

  Wallie

  (Sorry my English)

• When you modify a form in the DC or Pro Player I can enter text etc., save, close, and return later to change it. However, once I use the function "Fill & Sign" and save the document, it locks the file and all other fields are not editable. Is there a

  Hi guys,.

  When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.

  The signing is FINAL.  You cannot sign a PDF paper advance. Complete and save, do not sign.

• My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My computer crashed two weeks ago and all software had reinstalled in another HD. The first hard drive still has all the files and are readable. Where can I find the old catalog fall back all my work?

  My lightroom was great before the crash to work and I have a lot of work still pending.

  You will need the catalog file and all your images. If you have also stored your images on which crashed HDD you will need to copy them as well.

  The default location of the LR catalog file is in your user name folder in the folder on the ROOT of the drive users

• After the removal of a virus, shortcuts are now asking what program to open it with Vista

  I have kaspersky anti virus and it has detected a virus, deleted and I thought everything was fine, but when I click on something like the calculator, Notepad, firefox, whatever it is, it asks me to choose what program I want to open it instead of open it automatically. This isn't a big deal, but it is very irritating and annoying. Other profiles on my computer seem to be. The account is not an administrator account, but has information, I want to keep. Any advice would be appreciated. I ran several other spyware and antivirus scans and all my computer ratio is not affected. Thanks again

  Hi DavidTuray,

  You can refer to the article below and run the fix it tool available and check if you can set the associated file.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  You can also check out the following link and check if it helps:

  Change the programs that Windows uses by default

  You can also check the following link and try to download the Microsoft Safety Scanner and perform a full scan on your computer and check.

  Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

  Check out the link:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Hope this information is useful.

• All of my files have been converted to open it with Windows Media Player. How can I change this back to normal?

  Hello.

  I don't know what I clicked at all initially, but now, most of my programs have been converted to open it with Windows Media Player, so that they cannot work.

  Even when I click on the system restore (to undo changes I've done previously), Windows Media Player opens and there will be a window that says that you can not read this .exe file.

  I'm stuck and I don't know how else to solve this problem. Help, please!

  Hello.

  I don't know what I clicked at all initially, but now, most of my programs have been converted to open it with Windows Media Player, so that they cannot work.

  Even when I click on the system restore (to undo changes I've done previously), Windows Media Player opens and there will be a window that says that you can not read this .exe file.

  I'm stuck and I don't know how else to solve this problem. Help, please!

  Use this tutorial:
  Restore the .exe file aasociation...
  Read first, then scroll down to the spare part and click on exefix_cu.reg
  Excerpt:
  Difficulty of recording
  To resolve this problem, you must delete the UserChoice key above using a script or REG file. Downloadexefix_cu.reg attached at the end of this article and save it on the desktop. Right click on the REG file and choose merge.

  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• Cannot change the parameters, they are grayed out

  I am in my account on Firefox version 38.0.5 and when I go into my settings, I need to change the but they are grayed out. How do I get this so I can edit them? I went into the preferences of Firefox, then down to privacy and want to make some changes, but some areas such as clear history when you close Firefox is gray. How can I make changes in Firefox?

  Thank you all who replied to me.

  You have a check mark on the mode of private browsing permissions setting ('always to use the private browsing mode').

  You exit PB to be able to use all the settings that are currently blocked.