Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

Similar Questions

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Satellite Pro L300 - cannot use the 4 GB memory full

  My laptop is Toshiba Satellite Pro L300 model: PSLBDE-003005AR

  I upgrade my memory to 4 GB using 2x2gb PC2-5300 667 Mhz memory. When I installed the memory and I turn on my laptop the installation always pop up. When I removed the 2 GB of memory to do only 2 GB I spend on my laptop and it works.

  I am using windows Vista premium 32-bit edition. I wonder why I do not work with 4 GB of memory. I installed the memory correctly, but it does not work to 4 GB.

  > Laptop is a Satellite Pro L300 PSLB1A - 01 L 019. Lists of the Toshiba Site the maximum memory 2 GB spec however sheets provided with the laptop shows a maximum of 4 GB of RAM.

  This chipset uses this device?
  There are different L300 with different chipsets and different hardware components.
  Some L300 would be able to support 4 GB and some are limited to 2 GB of RAM.

  So if Toshiba says 2 GB are max so it's good and you will not be able to use 4 GB of RAM.

  Welcome them

• Update hard drive to the Satellite Pro L300

  Have a Satellite Pro L300 with a 120 GB hard drive, running Vista Home, the reader is divided 50-50 and does'nt Vista as to move the partition (Partition Magic does not work)...

  So would like to change to a larger HD... Q / I can do this, and how hard is it? even with the recovery of files on the Partition and if I bought the Toshiba recovery disks, gruff, when the player is changed discs would not reconise the largest disk that I discovered in the past using Norton Ghost.

  Upgrading the hard drive doesn't have to be the problem.
  HARD drive is placed in the lower corner under the HARD drive cover. HARD drive cover is fixed by two screws. Remove the screw, then the HARD drive cover. Please do it gently. After having this deletion drive by pulling on the tab kit attached to the pack, following the direction of the arrows.

  According to the specifications of the laptop you need SATA HDD and it can be upgraded up to 500 GB.
  After upgrade the disk HARD use recovery DVD for installation of operating system.

  Any other questions? ;)

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• Satellite L500-12F - error creating Toshiba Recovery disk

  Hello. New user on the forum and the new owner of a Toshiba.

  I am trying to create the 4 recovery disc for my Toshiba satellite L500-12th. Disks 1, 2 & 4 created with success, but 3 disk failed twice. The message I received was on the screen: cannot read the following file: F:backslash ZZImg backslash 09753xsp6.swm error Code: 020150-20-00000000
  (I can't type a backslash in this window of the computer)

  Anyone know of a solution or a similar problem?

  Dwight

  Hi Dwight,.

  The disks that you use to create the Toshiba Recovery disk?

  I have a good experience with Verbatim DVD-R. Have you tried these discs?

• Need help to retrieve the Satellite Pro C850 - 1 k 3

  Hello

  I'm new to this forum, but I really need someone's help that my laptop has had a virus on it, and I have to do a complete uninstall of windows 8, (it was preinstalled, so I don't have a restore disc)

  Every time I try to uninstall windows it says that some files are missing and to insert a disc of recovery of some sort that I did not.

  How can I do this?

  Thanks in advance for assistance.
  PS: I tried to create a recovery with a blank dvd disk but it says insert USB pen, I did not.

  > I tried to create a recovery with a blank dvd disk but it says USB pen insert, I did not.
  Usually, you can choose between USB flash memory and the DVD disc.
  Did you change this option before trying to create the recovery media?

  > When I try to uninstall windows it says that some files are missing and insert a disc of recovery of some sort that I did not.

  I have no idea what you tried to do, but the fact is that if you want to retrieve the laptop, you must use either the Toshiba recovery media (USB key or DVD disc) or recovery of HARD drive option, you can try:
  More details [here: http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

• Failed to retrieve the Satellite C855

  I created the Recovery DVD for this product and they do not seem to work. It's for Windows 8, but failed to start from the DVD. He starts the DVD and then presents a Windows 8 screen that says "Recovery - your PC needs to be repaired" with "a required device is not connected or is not accessible" and an error code of 0xc0000185 (those are zeros). The portable computer is unbootable plu. Using a Windows 7 DVD I can get to the recovery concole - I have not tried it but this and a Live DVD of Ubuntu seem to point to a failure in the recovery DVDs.

  I do not have a hard drive recovery partition, but I have no reason to suspect theres nothing wrong with the DVD I created. Other computers can read without any problem.

  Is this somehow so I can start this system? I am reluctant to pay 30 quid for a couple of recovery DVD from Toshiba, when I don't think I did anything wrong. If someone has solved this?

  Problem with recovery disks is very simple: either it works or not. If recovery disk doesn t work you can not do anything.

  In your ad, that I did not understand how extreme recovery installation, but if you not boot the OS or start the installation of HARD drive recovery, there is a big problem. You can only have the factory settings using the recovery disk. Another solution is the installation of the own BONE but I wouldn't do that because in this case you have to pay the new product key.

  Believe me, that the best solution for you is a new recovery disk command. It costs 30 euros but you will have the original recovery image and this version must not be activated.
  >.. When I don't think I did anything wrong
  In General, you are right but if created the recovery disc are not usable you can do.

• Failed to retrieve the DIAdem DataFinder research data, using data-finder toolkit LabVIEW 2009

  I am facing problem to retrieve the DIAdem Datafinder data.

  At first, I developed this project in LabVIEW 2010. But because of a problem that I met in LabVIEW 2010, I thougth to work on the project in LabVIEW 2009.

  Then, I reused the project that I created using LV 2010 using option economy for the previous version.

  When I tried to retrieve the data from the tiara using data finder toolkit. I got a 305505 warning. Please see the attached message of Warninig.

  But I have not seen this warning while I was working in LabVIEW 2010 and also, I was able to get the data from the tiara.

  Please suggest me a way to solve this problem.

  Hi Nanda,
  There is a bug when using the SDK use in combination with DataFinder Toolkit 2009.
  This bug is already fixed in LabVIEW 2010 and use SDK 2010. But as you said there is another question in LabVIEW 2010, forcing you to LV 2009.
  I suggest you use LabVIEW 2009 with use SDK 2009 and DataFinder Toolkit 2009 and instead to use the "Waveform.vi results" to read the search results, I would recommend to use the screw storage. I spread your example VI and it attached to this message. You will still see the dialog box to search for "lvStorage.dll" but it will automatically disappear and the VI works anyway because in this case LabVIEW will find the dll itself.
  My extended VI uses the '_openWithRoot.vi' to open a file with a different use than CT or PDM. This VI is also described in the following knowledge base article: http://zone.ni.com/devzone/cda/epd/p/id/4181
  With LabVIEW 2010 use support has been enhanced and fully integrated in the standard palette of storage screws. So in LabVIEW 2010, you can replace the "_openWithRoot.vi" with the 'Open Data Storage.vi' standard but with LabVIEW 2010, you can also use "Waveforms.vi results" to read the search results.

  I hope this helps.

  Kind regards
  Eva

• Failed to retrieve the multi selection of values using the child form

  Hi all
  
  I'm a newbie on OIM 11 g. Need a small suggestion.
  
  I have a requirement that I need to display a list of all services and the user can select more than one Department. Based on the need of some departments to pick up employees of the departments.
  
  I created the child form and added an attribute to retrieve the departments of Looups.
  Added the child form to your Parent process.
  
  
  Can someone help me by providing the next steps to achieve this functionality.
  
  
  Thank you
  SG

  Do not know if I understood your request correctly or not, but here are my understanding:

  You have users associated with different users. You want to set up users in some RO and why you created a few model numbers for select users.

  I hope that you have some kind of relationship between departments and users
  Have a single Dataset Parent
  Create a child Dataset and have two search boxes - a Department and second for the user
  Use search queries to select user based on the selected service in Field1
  Field2 be required i.e. user

  In the same way, create two processes form Parent and child. Child form will have two fields. You can create text fields.
  After approval, the data selected on dataset will come to your child process
  Create corresponding task of the trigger for INSERTION in the definition of the process that will read data from child to process the form and arrangement of these users. (Research Forum or go through Oracle Docs to learn more about these triggers to child form)

• Satellite Pro A120-185 - need Vista Recovery disk - never get a

  Hello, my trusty Satellite Pro C: is completely filled, and so I would wipe and do complete a new installation of Windows.

  It came with VISTA on it when I bought it several years ago.

  It's a Satellite Pro A120-185 and the operating system only disk I got with it was just something to 'upgrade' disc of Vista.
  I bought and paid for Windows Vista with the laptop, thus so I wouldn't have a license can I reinstall?

  Please note that I am an advanced PC user, I'm not looking for ways to reduce the space that my household is good and I uninstalled everything I do not use or need.

  I just want to be able to clean the laptop and reinstall Windows Vista... is it going to be possible? (I don't see why it shouldn't be because Vista came with the laptop!). Please tell me where I can get the windows disk since?

  Hi dude

  Read the other discussions on this topic even here in the forum.

  You didn t get this disk because you create the recovery disk using the Toshiba recovery disc Creator called pre-installed tool.
  This was mentioned in the manual as well!

  However, here you can order the recovery disk that you didn't create yourself.
  https://backupmedia.Toshiba.EU/landing.aspx

  Greetings

• Satellite Pro S300 - 117 PSSB0E Bios Recovery disk?

  Hi I have a Satellite Pro S300-117 PSSB0E-04J00UEN, and it seems that the BIOS was damaged when turned on the power lite 2 flashes green and 2 orange

  I'm looking to be able to rewrite the BIOS using a usb floppy drive or usb key that emulates a floppy drive.

  The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

  I believe also that the press/hold button when you turn on the power is the one above the tab key but also saw other keys such as F, F, F12 FN and ~. If all the instructions would also be appreciated.

  Kind regards

  Chris G

  > The problem is that I can not locate the file bios containing the bios Setup disk can anyone help?

  I could find a BIOS for this series on the Toshiba driver page we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=2496404&PF=true

  Zipped package contains the based victory and based back the version of the BIOS.
  Unpack this package and read the readme.txt file

  There you can find the details of the update of the BIOS using the diskette

• Can not recover my laptop using created recovery disks

  My hard drive crashed, I sent it to the warranty. She came back, but I wanted to reinstall.
  Before that, I did 4 recovery disks.

  Thus, when the laptop turned on DISC 1 was in and I could choose Windows 64, after a while he told me to put in the next disc. I did but no progress. I tried all the disks and none of them worked.

  How should I proceed from here?

  Unfortunately you can not force the installation of recovery to work. Either it works or not.
  Are you using these discs for the first time now?

  By the way: what model of laptop do you have?

• Drivers fail after retrieving the Satellite A100-285

  I used the recovery disc for the A100-285, but it now lacks the VGA, sound and other drivers who were very well before. any suggestions?

  Hello Vince

  Sorry, but I really don't understand what you are writing about. If you want to reinstall OS and have 'presets' new install OS using {color: #ff0000} Toshiba PRODUCT RECOVERY {color} DVD.

  It must be also written that contains the OS recovery CD/DVD.

• Satellite Pro L300 - cannot use Intel ProSet WLan tool with Win XP

  Hello! I have the same problem. I installed a XP SP3 and I can't use the * Fn + F8 * hotkey to activate the WLAN function on or off. Other Fn keys work correctly. The WiFi network also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work. It seems "no wlan driver installed. The card is a Realtek 8187 B, downloaded the driver on Toshiba support original site. What can I do?

  > WLan also works, but it can be used by the built-in Windows. Intel ProSet or Atheros programs do not work
  If the WiFi works fine using the windows zero configuration then the WLan adapter is enabled and don t get the FN + F8.

  The fact is that your 3rd party WLan configuration tool doesn t work because your wireless network card is * Realtek! *

  Intel ProSet ONLY works with Intel WLan card and the Atheros Wlan configuration tool can be used ONLY if your have an Atheros Wlan card.

  You have Realtek so use windows own zero configuration WLan!