"Failed to set the maximum number of files to open."

Similar Questions

• Illustrator - "unable to set a maximum number of files to open.

  HI - downloaded & installed the trial version of Adobe Illustrator CS6 on my Mac 10.6.8 but can't open it - get the error message "failed to set the maximum number of files to open?

  Error at launch. Unable to set the maximum number of files... | CS6 | Mac OS

  Mylenium

• CS6 "Unable to set a maximum number of files to open." YET.

  CS6 "Unable to set a maximum number of files to open." Just got the whole production and everything installed on my Mac, everything works fine to illustrator who only works very well on one not at all on the other. I tried everything I found on the forums here to my knowledge and without success. I just spent 2 hours on call on hold with adobe support and no one picked up. Extremely frustrated, any help would be greatly appreciated.

  Hey eldriario-

  I just fell on it myself. I ran this doc to help adobe (link below) shell script once, quit Illustrator, repaired permissions, rebooted and was then able to start normally.

  Mind you, I would not the least bit surprised if the error returns again tomorrow, but for now it seems to work.

  Good luck and hope this helps.

  http://helpx.Adobe.com/Illustrator/KB/unable-set-maximum-number-files1.html

• How can I set the maximum number of reboots for my PDF files?

  I want to sent my PDF to a friend, but I just let see only twice.

  
  

  How can I set the maximum number of reboots for my PDF files?

  My software is Acrobat X

  You can't - a PDF security options do not allow control over the number of times the file can be opened, even using DRM.

• Hi, how to set the maximum number of connections of FMS on the same IP address

  How to set the maximum number of connections of FMS on the same IP address?

  The application.clients object available in action script server-side maintains a list of all clients connected to the Court at this moment here.

  You can browse the table and compare the property Client.ip to determine the max connections from an ip address and therefore accept/reject connections.

  It can be as simple as this in the application.onConnect

  application.onConnect = function (clientObj)

  {

  var totalConnections = 0;

  for (i = 0; i< application.clients.length;="">

  {

  If (application.clients [i] [ip] is clientObj [ip])

  {

  totalConnections ++;

  }

  }

  If (totalConnections > 10)

  this.rejectConnection (clientObj);

  on the other

  this.acceptConnection (clientObj);

  }

  Above the piece of code is untested so you may have to make some changes to make it work, but your solution should look something like this.

• What is the maximum number of files that I can place in a subfolder in FAT32

  FAT32 maximum number of files in a folder

  The maximum size of a directory of FAT32 is 32-bit 65536 entries. A file it will take at least 2 entries according to the length of the file name. Long filenames are stored in 16-bit UNICODE characters, and only thirteen characters are stored in the directory entry.

  Big directories should be avoided for performance reasons. For example, adding a file requires all existing entries to be analysed in order to avoid duplicates.

  FAT32 specification can be downloaded here:

  http://msdn.Microsoft.com/en-us/Windows/hardware/gg463080.aspx

• Setting the maximum file name length under Win XP x 64

  I am trying to find a way to set the maximum size of the name files in Windows XP x 64?

  I think I need to set the value of the MAX_PATH limit in environment variables or the Windows registry?  I am running Windows XP x 64 on an NTFS partition, so my theoretical maximum for a file name is 255 characters. Is it possible to put down?

  Destructive how would making this change not my system?

  Thank you

  MAX_PATH is a system/constant variable used when the Windows operating system is compiled.  There is no way to effectively change without recompile Windows from its source code.  Note that this sets the maximum length of the full path to the file, including directories parent so that the only way that a file can actually be 255 characters long would be if it was located in a root directory.  This is not a hard limit, however, there are some programs that can handle path names has more MAX_PATH (for example "Robocopy").

  HTH,
  JW

• Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Had to reinstall my CS3 because of faulty hard drive. It does not accept my serial number as it says it is already used the maximum number of activations and says I should turn off. I can't as the hard disk failed! Please help.

  Have already tried to contact Adobe and they told me to reinstall the program. I did this and the same issue. It's crazy. I can not turn off something that I did not more...

  Thank you.

  No - I had, of course, tried all these things. Finally, I had someone (after several days) on the personal chat group that could fix and it did it in a few minutes. Too bad that nobody else seemed to be able to do. Adobe is very soft.

  I can't thank enough the other person - it was amazing.

• Facing the question with the Maximum number of connections Timesten

  Hello

  In my project, I need to increase the maximum number of connections that timesten offers me. So, I changed the setting of the nucleus as shown below in the file/etc/sysctl.conf.

  kernel.SEM = 655 670720 128 1024

  The intention here is to get 500 connections max. But even after this setting too, I get only 477 connections. I don't understand why this is happening. Someone help me understand what is happening here.

  In above configuration, my hypothesis is that 155 semaphores are reserved for internal use of timesten and remaining 500 will be available for me, but this isn't the case. Please, help me in this aspect to understand why I get only 477 connections instead of 500 connections.

  Quick help is very appreciated

  Thank you

  Agnes

  Hi Agnes,.

  Thanks for the release of ttStatus. He explains what is happening and confirms my suspicions (second).

  The setting of the 'Connections' in the DSN attribute defines the limit superior on user connections; that is, connections by applications and tools such as ttIsql, ttMigrate etc etc. There is also the concept of connections 'system' (subdaemon, replication agent, agent of cache etc) that do not count against the total "Connections."

  In your case, the database is in fact properly configured for a maximum of 500 user connections. However, as you can see on the first ttStatus, you already have 23 application direct mode of 4 different connections methods of Java (which leaves the available user 477 connections). I of course have no idea what these applications are but probably your. This means that you are able to open additional connections a 477 application before arriving to the configured limit of 500. And that's exactly what we see; When you run your test application (what happens to connect via client/server), it reached 477 connections and then impossible to create more. As expected.

  Therefore, to allow connections you must:

  1. stop the database (replace ramPoilicy by manual (or inUse), stop all applications, stop the replication agent, unload from memory if the policy is manual)

  2. change the value for connections in the attributes of the DSN to a higher value (perhaps 600) - also, you need to make sure that OS semaphores are high enough to allow this number of connections.

  3. load the database back in memory, start the replication agent, starting applications.

  A a tied note, use of ramPolicy 'always' is not encouraged. In addition to the scenarios 'manual' is a better choice. We can "always" deprecated in a future release.

  Chris

• LR6: serial number is used by the maximum number of computers

  I ran 6 Lightroom on two mac computers. I reinstalled Mac OS X from scratch on both computers without turning off / disconnect in Lightroom.

  Now I want to install LR6 on fresh installed computers and a message says serial number (license key) is already in use by the maximum number of computers.

  Because I don't have access to the old facilities I can't log out of lightroom and I can not find any place in my adobe account where I can see / Disable computers where LR is installed.

  Any idea is welcome!

  THX and regards

  Guenter

  As indicated by Sheena, you need to contact Support and request that they reset your activations.  Support does not work during the weekends and holidays, so you have to wait the normal opening hours to make this request.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat
  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

• Increase the maximum number of query results

  Hello

  I need to increase the maximum search results, when I'm looking for data with data-> ValueMaxCount

  I'd like to 2000

  I tried tho change it with the help of the property page and the example given.

  The result looks like this:

  Define DataFinder = Navigator.ConnectDataFinder (Navigator.Display.CurrDataFinder.Name)
  Set IndexedFileProperties = DataFinder.GetIndexedProperties (eSearchFile)
  Set IndexedProperty = IndexedFileProperties ("fileName")
  Define ValueList = IndexedProperty.GetValueList
  DataFinder.ValueMaxCount = 2000
  Define ValueList = IndexedProperty.GetValueList

  But the quantity of serach result remains at 200

  I am referring to the wrong object or do I need to increase it to a certain point?

  Concerning

  Janick

  Hi Janick,

  your script increases the number of values that are returned if you ask for all values that are indexed to a specific property (in the BROWSER QueryForm you will receive this list by clicking the... button to the right of the line a condition).

  To increase the maximum number of search results, you would use the MaxCount property for the elements of results.

  DataFinder.Results.MaxCount = 2000' in the search without the GUI

  or

  Navigator.Display.CurrDataFinder.ResultsList.Elements.MaxCount ' in the search with the BROWSER GUI

  What version of DIAdem do you use? 2015 tiara, it is also possible to determine the maximum number of search results in the search method:

  DataFinder.SearchElements (Query, 2000)

  I hope this helps.

  Good day

  Eva

• NiDAQmx limits the maximum number of analog samples which can be read / buffer?

  I try all the time on a USB-6363 to 1000 Hz 2 channels analog samples.  Everything works until I have started to increase the number of samples to read only once in DAQmxReadAnalogF64().

  I have set up the buffer in DAQmxCfgSampClkTiming() like twice the amount of samples, I want to read at some point.

  Up to about 8000 samples (128 000 bytes: sizeof (double) x 8000 x 2ch) it works and read call returns without delay once all about 8 seconds.  Increasing the number of samples other than that, I can no longer read the data (the DAQmxReadAnalogF64() always holler times).

  Question: am I running in a limit on the maximum number of samples that can be read or buffered... maybe a DMA limit any?  What determines how big you can make the buffer in DAQmxCfgSampClkTiming()?

  Maybe it's not obvious, according to the documentation, but if you look at the output value of the parameter samples per channel function DAQmxReadAnalogF64 reading, you'll see that when it times out, he reads what was available when it has expired. So if you're always calling this function, and your timeout value is too short, then you'll always be timeout, but you will always catch all samples. You can view this as the function will return when the buffer is full, or the timeout is reached. That's why we have provided an exit indicating the number of samples read.

  As a general rule, ask not read like this with DAQmx. I would recommend registering a callback for EveryNSamples (there is an example that's bundled with the CVI on how to do this), or by specifying a longer period than what it will take to gather real that many samples (in your case, 8000 samples at 1 kHz would be > 8 seconds). The main problem with the polling stations with a short time-out is that you should ignore errors that is not recommended.

• Sharing the maximum number of folders in windows server 2012

  Hello

  What is the maximum number of shares that can be set in windows server 2012 (or windows server R2 2012)?
  Is there a limit to the number of shares?
  This default can be changed (increased)? If so, how?

  Thank you
  Limor

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to set the maximum value of the slide in run mode

  Hello

  I have a number of files to process, the files are going to be covered in the runtime. I want to use a slider that controls a single in the process at some point file. As the total number of files cannot be pre-be determined, I wonder how I can configure the maximum value of the slider when running (after I know how many files in the pool).

  Any help will be greatly appreciated.

  JACIE

  Right-click on the property and select change writing.  Now you can wire a constant to the property node.

• Can I manually set the maximum size of the thumbnail cache?

  I notice that in a folder with a large number of photos, there seems to be a limit to how much stored thumnails. If I quickly scroll the I get to a point where I have to slow down and wait for the thumnails to regenerate. I wish I could store all thums so I can go to any point in the subdirectory and see them with no delay (the whole point of a cache). I have 4 GB of RAM so I don't care if it uses a fair bit to do this. Y at - it a key option or the configuration of the registry to set the maximum size? I have Vista Home Premium x 64.

  Hello old giza,.

  Thank you for your response back!

  Except there is no way to increase the size for the thumbnail cache.  You are able to clear the cache and I saw on third party internet providers that offer this possibility.  But the operating system is not an option to increase.
  Maybe if you can give more details about what you're trying to do we can get to the best situation.  Please let us know status.  Thank you!

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.