"failed to set up the windows updates. returning from changes. do not turn off your computer.

Hello

I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
I have updated with the SW update
The results of the troubleshooting online are:
Problems encountered:
Recent updates - not fixed installation problems
Search for missing or corrupted - files detected
Some security settings are missing or have been modified - fixed
Registration for the service is missing or corrupt - fixed
Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

Hello

Thanks for trying to help. Now my computer seems to be up-to-date.
I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
I did IE default web browser I have prob changed when I got to the computer.
I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
I ran the reset troubleshooting of Windows with the same result as before is to say:
Recent updates - not fixed installation problems
Search for missing or corrupted - files detected
I think I have restarted my computer at this stage and then tried to update again.
It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
Thank you.

Tags: Windows

Similar Questions

  • Default configuration of the windows updates. returning from changes. do not turn off your computer. (Infinite loop)

    Problem:

    • Computer: Lenovo N580
    • Windows 8
    • Reset my computer to factory reset
    • All my files uploaded to the computer
    • Launched about 120 windows updates
    • Now, the computer is stuck on the blue screen with the message that seems to never go "failed windows update Setup. returning from changes. do not turn off your computer"I can't access the login screen or any screen to disable the windows update.
    • I tried the solutions posted by other users with the same problem but without success.
    • Please help me with a solution where I don't have a factory reset because I don't have another copy of all my files!
    • Also, is there a way to access a safe mode on Windows 8? I tried F8 or SHIFT + F8 after starting, but nothing happens. I read a post online where Windows 8 have removed this feature. Is there another way?
    • Help, please! I AM ETERNALLY GRATEFUL!
    • THANKS IN ADVANCE!

    See: http://support2.microsoft.com/kb/949358/en-us (run a system restore)

    Perform the system restore from the recovery of Windows and check.

    (a) once you start your computer by using the Windows DVD or disc repair system, a black screen is displayed with the gray text "press any key to start from the CD or DVD. Press a button on any.

    (b) select the correct time and type keyboard.

    (c) click on repair your computer in the lower left corner.

    (d) select Troubleshooting in choose an option screen.

    (e) click Advanced options in the form of resolution of the problems.

    (f) select System Restore.

    Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

    Reference link:

    How to refresh, reset or restore your PC.
    http://Windows.Microsoft.com/en-in/Windows-8/restore-refresh-reset-PC

    If you don't have disc to install Windows or the system repair disc, contact the manufacturer of the computer.

    You can also refer to:

    How to create the installation media for a PC refresh or reset:
    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  • Default configuration updates window to update. returning from changes. do not turn off your computer

    I, too have this problem, however, it's on my new Lenovo Thinkpad 2 and the endless loop is going for 4 1/2 hours. I'm crazy! I only had it for 4 days. Can someone please help?

    Hello

    Welcome to the Microsoft community.

    I understand that you are unable to install the Windows updates and receive an error message.

    This must be due to the corrupted Windows Components update or conflict between third-party applications or external devices.

    I suggest you perform the steps below in the Microsoft Help article:

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    http://support.Microsoft.com/kb/949358/en-us

    Note:

    1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

    2. Please do not perform upgrade in-place or reinstalling Windows.

    3. after the boot minimum troubleshooting step, read the sections "How to reset the computer to start normally after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

    Hope that it can solve the problem. If the problem persists, please answer us, we will be happy to help you.

    Thank you.

  • Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

    OT: Windows Update failure 8.

    I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

    Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

    Thank you!

    -me15prg9926

    Why I can't update in the store?
    http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  • Default windows setup updates returning changes do not turn off your computer

    Kindly help me because I'm having this problem default configuration of the windows updates reverting changes do not turn off your computer. It may take a long time before he return to normal. I use windows 8. Assistance is very welcome.

    Thank you

    Please run the Windows Update Troubleshooter:
    Download it from this link.

    Please provide details of any problem it reports as not fixed.

  • Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

    Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

    When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

    I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

    It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

    Any solution please?

    Thank you

    Hello

    I'll get you the link and restore your computer to a previous working state.

    http://support.Microsoft.com/kb/949358/en-us

    Please reply with the status.

  • My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that

    My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8.

    Do a Startup Repair:

    Auto repair - run in Windows 8 - Windows 8 Forums

    Let us know if it is not resolved

  • Windows 8.1 message 'you could not complete updates, by undoing the changes, do not turn off your computer.

    Greetings,

    I installed updates in my Windows 8.1 partition.  Then he asked me to restart the computer, and the message "we could not finish updates, exchange loss, do not turn off your computer" appeared and was on-screen for hours.  I thought to reinstall bootcamp but I have software in the Windows partition that cannot be recovered.  I read that one of them starts Windows in 'Safe' Mode, but this is not possible. I use a MacBook Pro (retina, 13 inches, early 2015) OS X 10.10.5

    How can I fix this without wiping the Windows partition and lose my software?

    Thank you!

    Have you created a Windows system restore point before the upgrade?

  • Default configuration Windows update restore changes do not turn off your computer.

    I'm running 64-bit Windows 8

    Guard saying default configuration of folds by using Windows Update

    Hi Cris,

    Thanks for posting your query in Microsoft Community.

    You did it any significant hardware or change software on the computer before this problem?

    I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

    First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.


    The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to start the computer successfully after following article provided above, I also suggest you try the following steps and check if the problem persists.

    Method 1:

    Try to run that Windows update utility provided in the following link.

    Problems with installing updates

    Try to install the updates after running the troubleshooter.

    If the problem persists, try the following method.

    Method 2:

    I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

    (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    (b) type the following commands. Press enter after each command

    • DISM.exe / Online/Cleanup-image /Scanhealth
    • DISM.exe / Online/Cleanup-image /Restorehealth

    (c) close the command prompt, and then run Windows Update again.

    Check if the problem persists.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Error "FAILED TO CONFIGURE UPDATES of SYSYTEM REVENANT of CHANGES DO NOT turn OFF YOUR COMPUTER"

    Respected by all,

    Could someone help me please with the problem. I can't access the windows at all. It has blue screen that says "FAILURE TO CONFIGURE updates SYSYTEM RESTORE CHANGES updated DO NOT turn OFF YOUR COMPUTER" pls help

    You may need to stay on this screen for not more than one hour, if there are serious problems with Windows Update.

    If you can always access your PC after waiting, turn off your PC. Then turn it on, immediately pressing F8 constantly. Once you get a black screen with options, select Safe Mode with the arrow keys and press enter on your keyboard.

    Once Windows finishes loading of files, you can start in safe mode, where you should be able to log on normally. You will notice that the screen resolution has changed, and when you log in, you will see a black desktop computer. This lets you know that you are using safe mode. Once you log on, restart normally.

  • computer is stuck in a loop saying updates are not configured correctly. Coming back from changes, do not tun off your computer

    I tried to update in safe mode but can not even in safe mode. I don't have a hot spare provided with your computer.

    Hello

    What day did you tried to install? You may be able to see once you are on the desktop.

    Step 1: You can try using the know last good configuration option and check.

    Step 2: Try the methods of troubleshooting provided in the article.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

  • Computer frequently interrputs/farm low w/message: "updates - 0 full Setup. Do not turn off your computer.

    Also messages follow: "updates not configured correctly.  Returning changes - do not turn off your computer. »

    Take a look at this article to see if it helps to solve your problem: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

  • Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    http://support.Microsoft.com/kb/949358

  • Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

    Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

    Original title: tried to update computers rose to 12%

    Hi Sandra,.

    Thanks for posting your query in Microsoft Community.

    You did it any significant hardware or change software on the computer before this problem?

    I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

    First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.


    The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

    Method 1:

    Try to run that Windows update utility provided in the following link.

    Problems with installing updates

    Try to install the updates after running the troubleshooter.

    If the problem persists, try the following method.

    Method 2:

    I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

    (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    (b) type the following commands. Press enter after each command

    • DISM.exe / Online/Cleanup-image /Scanhealth
    • DISM.exe / Online/Cleanup-image /Restorehealth

    (c) close the command prompt, and then run Windows Update again.

    Check if the problem persists.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

    Former title: windows 8

    Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

    Hello

    Please contact Microsoft Community.

    We understand the inconvenience that you are experiencing.

    1. How long it stays on the same screen?
    2. Windows Update is causing this issue?
    3. Have you tried to interrupt the installation at any time?

    When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

    Please see the article below and see if this can help you.

    https://support.Microsoft.com/en-us/KB/949358

    Let us know if you need assistance.

Maybe you are looking for

  • keyboard after update

    Since an automated HP update, my keyboard is defective. Letters do not always appear and scrolling down is a nightmare - I had to leave the USA at home because I couldn't change my country. We said there must be malware on the computer but the malwar

  • Programming analog input registers for MSeries NOR-6280 under rtx

    I have an aiex1.cpp example, I kown it write a bit in a register, I want to translate it into RTX.but I found some one wirte registry and I am also not kown the default bits in registers, then use "*(u16*) addr_tmp |" (1 =< 7);"="" is="" wrong,="" wh

  • HP Sparekey administrator password

    Hello I bought the laptop HP Probook 4321 s year 2010 of China. I have all the documents that gave me at the time of purchase. I have 5 questions. You help will be appreciated. Thank you. (1) my PC came without windows pre-installed. What happens if

  • Need to report on all database objects changed

    Is there a way to create a report that displays all the database objects that have changed in a given period of time?  We have FT SQL running, so I can see that they have been collected, I just can't understand how a report out of it.  When I create

  • Windows will not start and repair functions do not work

    Hello! A few days ago when I turned on my laptop, it said 'unable to start Windows. A recent hardware or software change might be the cause. «I tried to solve the problem through the installation and repair of computer disk, but the startup repair do