Failed to start after the windows logo screen, please help.

Similar Questions

• Inspiron 9300 screen turns off after the Windows Logo screen

  Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

  Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

  I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

  I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.

  
  

• BlackBerry Smartphones Blackbold does not start after the progress bar screen. any help

  I have a problem with my blackberry bold 9700. When I reboot, the next screen that comes after the progress bar screen is my network name of phone, and nothing happens. I get a screen of "vodafone" with their logo.  nothing happens after and I am not able to access blackberry. What's wrong. any help on how to run again

  Hello and welcome to the community!

  I recommend that you try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

  If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

  Good luck and let us know!

• After the start, after the windows logo goes

  After the logo disappears when you start upward, I get a black screen for a few minutes, then the pc starts

  I have now resolved the issue with the black screen, I used the wrong type of windows, I was using a 32-bit instead of 64-bit, I have now installed a 64-bit, and now everything's fine

• Black screen after the Windows Logo screen

  All of a sudden just put off the computer. I keep trying to start it up, but just then it gets to a black screen and does nothing. I managed to get in Mode safe like twice, but when I try to access safe mode again, it gets stuck loading. What can I do to save my laptop OR at least save my data?

  Hello

  It will be interesting to know what model of laptop you have. I had the same problem and I connected the HARD drive to the second workbook as external HARD drive. on this way, I was able to copy all the important data.

• Lightroom 6 fails to start in the window of 10.  Help, please.

  I have a computer Dell XPS 13: 10 window.  Buy Lightroom 6 standalone (perpetual) in March 2016.  It works fine until yesterday.  The opening, the home page with photo trees shows but failed to launch the program.  A small blue circle is always running.  Mouse left or right click Activate a message from "Adobe photoshop Lightroom not responding" and only turn off.  Restart the computer by turning market or restarting does not solve the problem.

  Hi Yves,

  Please make sure that Lightroom is updated to the latest version, 6.6.

  Also read the following article: Adobe Lightroom GPU troubleshooting and FAQ

  Try the procedure described in the article as well: MSVCR110.dll error opening Adobe Creative Cloud apps in Windows 10

  Let me know if it helps.

  Concerning

  Tanuj

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• Windows does not pass the Windows logo screen at startup

  Original title: computer Dell does not start

  Now, he gets to the Windows logo screen and will not get any further. I tried to repair windows startup and restore among other things. Previously, he was to reach the blue screen and would occasionally work by me it turn off and try again.

  Restart your computer and hit F8 repeatedly (once a second should be enough) until you see the menu Advanced Startup Options. Select repair your computer (if this option does not appear you have to start from the Windows recovery disc or the installation disc).
  Then select System Recovery Options and run the Startup Repair tool.
  http://bit.LY/9rV2SB

• Windows startup at black screen after the Windows logo

  Original title: Evga Nvidia GeForce GT 520 1GB black screen graphics card

  I have a Hp Pavilion 6400 in the series which ran on Windows Vista (32 bit). I recently installed Windows 7 Ultimate (32 bit) and now the screen goes black once the windows logo closed its animation. I uninstalled the driver, re the driver installed and configured my system to the lowest resolution.

  Already found in the forums.
  -TV is too old to be compatible.
  EVGA - technician told me that the food was not powerful enough.
  -Forum Windows says: error in Explorer.exe.
  -Also found response that runs the computer through MSconfig would solve the problem.
  So far, none of these solutions have worked. Answers appreciated.

  Problem solved.

  It turns out, the driver for the video card would never completely install due to its mode of operation.
  Solution.
  1 restart Windows "low resolution".
  2. access to the form of previously downloaded files driver install the EVGA site while in safe mode.
  3. once divers have installed I changed the resolution in a HD rather than a framework
  "(native)" parameter in the resolution section.
  4. application of the Windows updates.
  5A started playing Star Trek Online.
  Thanks for your reply and have a great week.

• Why pc does not start, and the windows logo hangs after installing the update?

  often, I can't start my computer after installing updates. I push the button the windows logo hangs and windows did not start so I manually press the button close. After I press the button again the Startup Repair tool appears so I can get the windows works normally. but happening permanently since buying the laptop 2 years ago, but not after every updates. It happens randomly.

  Hello

  Method 1:

  I suggest you to use the Windows Vista disc to perform a Startup Repair:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2:

  If the method above does not help then you can check the link below and check the troubleshooting steps to resolve the problem.

  http://support.Microsoft.com/kb/934540

• Windows 7 stuck on the Windows startup screen. Help!

  I was playing a game (Counter Strike: Global Offensive - on Steam) on my PC I got the blue screen error was 0x000000A3, after that I booted my PC then it got stuck on the Windows splash screen. Now, when I start my PC it gives me only 2 options, "start Windows normally" which leads to frozen Windows startup screen and it gives me this: '(recommended) launch Startup Repair' that I have used and tried all the options, except the command prompt like I do not know how to use it.

  My PC is a Windows 7, Asus

  Hello

  Often, this will work when the built-in repair software will not.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.

  When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds.  Then the screen goes black instead of blue and stays black for about 10 seconds.  A 'Power SAVE MODE' appears.  The machine is dead to all orders.  I have to stop by pressing the off button.  I can turn back and the F10 key to get in Mode safe mode with networking.

  I tried to reinstall Windows XP original but it would erase my files.  I tried to restore the last good configuration also knowledge.  That did not work.

  The change came after a Windsows update.  I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start.  Clues?  I use Negear.  No change when I hooked directly either.

  Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do.  What does not load Windows?

  http://wiki.answers.com/Q/How_to_get_out_of_power_save_mode_when_computer_screen_is_black

• Laptop Notebook screen black after the windows logo

  Hello

  I've had my laptop for a year now & recently installed AVG 2013. But when I started to run a full scan I get error of reference memory (keeps changing the process or service) and the system freezes or get a BSoD (kernel related). the only change I did was enable DEP for programs because I thought that I was associated with DEP. Then leave my computer, run chkdsk /f /r from one day to the next and now my windows 7 does not start after windows logo. Safe mode is inaccessible, which means get the same result if it was after finishing charge I get black screen where I can only move the mouse. I tried memory diagnostic as well as memtest86 + passing. Then performed a test drive (press ESC then gives you option to run the System Diagnostics) which only failure was the short DST (happen before, but don't really think much of it since windows 7 was always start) but the other test that was in the past of primary hard drive in the bios test. Using disc of windows 7 installation to fix this problem that left me no option because the startup repair does not give me a hard drive error. History of the system does not since it says it can not detect the previous operating system. I can use command prompt on drive here where I can see my old files to disk.

  Will display the error code when I get home from work & model number.
  -windows 7 64 bit home premium, 8 GB ram, 750 GB HDD, Intel core i5 processor

  to work so will later if requested model poster
  1. I have to reinstall the OS.
  2. is there anything I can do to get less back to my normal BONE to save the files that I need.

  Thank you

  Hello

  sad to know that your warranty has expired, you should have done the warranty extension is added value to any kind of failure that could happen.

  Errors can be due to several causes as moving a place at a different time unit is on, power outages sudden, virus, etc., there are several factors.

  I´ll leave you a link to when possible he looks there very important data :

  http://h20345.www2.HP.com/Nr/Rdonlyres/463052B0-1169-4409-A077-BF5F9DFEAFB5/0/HPHardDiskTroubleshootingGuide050617.PDF

  Any questions or doubts Don t hesitate not if need help or advise how to replace the hard drive has just said.

  Best regards

• After a power outage, I can't start after the Windows XP logo.

  Original title: power failure

  Power outage caused the computer shut down when I turned the computer back on it will also further than the xp logo window and start the whole process again, he seems to be in a loop, how do I fix it

  Trying to boot into safe mode by pressing F8 after feeding on.then restart system & try, if not

  Run the disk check
  After starting in safe mode

  Start - Run and type CMD at the command prompt type CHKDSK/f

  OR

  repair the operating system.

  Kind regards

  Chauvet J.