Failed to start Windows after the installation of updates

Similar Questions

• Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

  After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.

  Is there any special step before installing a Dual Boot with Ubuntu system?

  My laptop is a Satellite C55 - C - 1 M 0.

  Thank you. Kind regards.

  I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8

• When you start windows after the installation of RAM, screen sparkles.

  After that I installed RAM, I turned on my computer and the screen fizzed.

  Uninstall the RAM > work put RAM back in > Scan matching RAM to install.

  http://www.crucial.com/

  Analyzer to use on the link to find out what RAM you have t adapt it and the ability of your motherboard RAM.

  See you soon.

  Mick Murphy - Microsoft partner

• Does not start successfully after the installation of updates.

  My sister has installed about 16 updates to windows on his computer. For some unknown reason after these updates, the police on the websites was different (a bit pixelated). She could not know how to solve this problem otherwise that restore to before the update. Then she started to install updates in the sections. She installed upgrading Cumulative security for Internet Explorer 8. He said she needed to reboot to complete the update, so she hit the button to restart. It began to restart and but just sat there for about 8 minutes approximately. She hit the power button to turn it off and then turned back on. The windows icon appeared and the fully charged status bar but then he just sat there on a white screen. We turned off and on again and it has always the same thing. I tried hitting F12 and it did nothing. I hit F2 and it went to the options but I have no idea what I should do, if anything.

  So, can you help me? What should I do now?

  EDIT: I tried a few times to press F8 to boot into safe mode, and it does nothing. I also hit F12 and it brought me to a start menu. I hit "diagnoses" and it did nothing.

  Hi, please check the information here: http://cmdrkeene.com/quickly-repair-pc-problems

• Windows 7 does not start after the installation of updates - sounds familiar!

  Apparently, I have another system that no longer starts after you install an update to Windows 7. New kick computer _ I have to disable the automatic update of windows. Twice I had to restore the system in the first week because he hung up after the installation of updates for windows 7. I have no idea what update is the cause of the problem.

  Essentially, start the screen goes black with the cursor blinking in the upper left corner of the screen. The only way out is to restore the system.

  Does anyone know what update is the culpret? HP support has no idea. Their only solution was to update windows 7 to 'never download an update from windows '. It is a terrible thing to be underestimated solution.

  Here's the resolution...

  I installed all the updates except KB2284742 954430, 973688 and 971033. So I decided to install these 1 4 at a time in the order shown. I installed successfully 228472 and 954430 and 973688 disappeared from the list of available updates. So I installed 971033 and it installed successfully and I was still able to restart.

  My conclusion is that there is a conflict between the first 3 updates when they are installed at the same time.

  Now my system is up to date with all windows updates and I'm able to restart without any problems!

  Close this message.

• PC has not successfully restarted after the installation of updates

  Hello

  I have been updated with Windows Update and asked to restart my PC after the installation is complete, however, my computer froze just at that moment, so I had to press the power button to force it to close. So I don't a not properly restart but forced my PC to stop and I have not a screen saying "Configuring updates" as usual (because there is no restart appropriate but just a forced to close). When I turned on my PC back, I thought that all updates have been lost or screwed up because I don't restart the PC correctly, however, instead, windows said it was "Configuring updates" (from 0% to 30%) and 30%, he said he has been stop and then rebooted my machine and these updates have been 100% configured/installed.

  So my question is, were all 100% installed as said windows updates or was it just a fake reviews? Because I forced my PC to stop rather than restart it when all updates to complete the installation.

  In addition, argues that all updates have been installed successfully in the "Installed updates" menu, too. Please let me know if it of a false notice or not.

  Thank you

  T.

  Since you have not stopped correctly after the installation of updates, updates could not configured correctly

  Follow these steps to see the Windows updates are installed on your computer.

  1. Open Windows update via Control Panel

  2. In the left pane, click view update history.

  Use a system restore to restore your system to a previous state before the installation of the updates

  =================

  1. click 'Start' and type system restore in the search box, and then click "System Restore" in the section programs.

  When you are prompted by the User Account Control feature, click "continue".

  2. do one of the following

  * If there is a recommended restore point, click on choose a different restore point and then click Next.

  * If there no restore points recommended in the list, simply click next to continue.

  3. Select a restore point in which you know that the operating system works and then click on "next".

  5. in confirmation of your restore point page, click on "Finish".

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All the data disappeared after the installation of updates! Help!

  Hoping someone can help with this
  Last night I installed updates KB961371, 973346 KB and KB 890830 for Vista Home Premium and they seemed to have been settled... my computer turns off fine. But when I started today and connected to my usual user, I got a pop-up message from the tool bar by saying "your user profile was not loaded correctly, you have been logged on with a temporary profile, cnanges do you will be lost when you log out." Check the log of the events for more information or contact your administrator." I then found that all my data was away from all my files (music, photos, Documents, analyses)... everything was gone. I then logged out of my user every day and in my admin to have a snoop around and all the data disappeared from there too. While in admin I also looked in the update section to see if the updates have not been installed correctly, but he said that they had been installed successfully.

  I then rebooted, as I thought that it might help, but everything remained the same.

  After the reboot, I clicked through 'my computer' and hard the news here on the disc wrote I have 89 GB of 147 GB free, which I think is consistent with the amount of data I have stored. This made me think that the data is always there somewhere, but I can't access it at all thanks to my user every day or my administrator.

  As far as I can see, all the programs that I installed myself (such as Skype, open office software for my printer hp) are all present, but some of the shortcuts are out of the office. Also, when opening, they "behave" as newly installed programs. for example: Open Office writer guide me through a license agreement and registration rather than simply open a new document, and also firefox behaved in a way similar "new". Also, on commissioning today (after the installation of update yesterday), the window "welcome center" popped up, as did a window asking to save the "synaptics pointing device.

  In short, the system "behaves like new", remembers none of my settings etc, but it is still a my programs installed and most of all, I can't access any of my data! I have a Toshiba Equium P200-178 (use vista Home premium service pack 1 32-bit), I use AVG anti virus (8.5) and Ad-aware software anti spyware. These are updated every day and I run scans on a regular basis (last analysis aware ad probably about a week ago) so I'm not sure it's associated virus.

  Ask yourself what is this "temporary profile" and how to return to my old and my data! Help, please! Thanks :)

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  Good luck with it.

  Mick Murphy - Microsoft partner

• Only get a blinking cursor when you try to start after the installation of updates

  Original title: blinking cursor when you try to start

  After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start

  Hello

  1 update you tried to install?

  Step 1:

  You can check out the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• System restored automatically after the installation of updates & a few missing desktop icons.

  Original title: same set of updates on both computers due to different problems, one problem being a system restore.

  I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

  1 COMPUTER DETAILS:

  News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

  While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

  Update for Windows 7 for x 64-based systems (KB980846)
  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
  Update for Windows 7 for x 64-based systems (KB982519)
  Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
  Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

  After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

  I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

  Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
  now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

  Since I installed the latest updates for 1 computer with no apparent problems:

  X 64-July Windows malicious software removal tool (KB890830) 2010
  Update security for Windows 7 for x 64-based systems (KB2032276)

  NEWS ON COMPUTER 2:

  The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

  At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
  an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

  A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

  BACK TO THE COMPUTER 1:

  Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

  Thanks for any help.

  No, I don't use the Norton removal tool.

  IN RE COMPUTER 1 ONLY:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my laptop keeps restarting after the installation of updates

  my laptop is stuck at step 3 of 3 (only display 0% complete) after the reboot for updates, then restart again and again, with the same supposed progress, I ve let it doesn't restart on 7 times.still no good.

  Tell me what are the steps to solve this problem

  Hi Amrbialy,
  When your computer is turned on, push and hold down F8, this will bring an option before it starts on your desktop. Choose "last known good configuration".
  If this has no effect. Then do the same thing, except choose Safe Mode. When it boots to desktop click Start > all programs > Accessories > system tools > system restore.

  Then it will give you an option to choose a date to return. Choose a date before you install updates, and then click OK. Restart your computer.

  It will be useful.
  Let us know how it goes!

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• ENVY M6 - 1184ca: 8.1 for Windows does not start after the installation of update KB2919355

  Updating Windows 8.1 KB2919355 has proved to be extremely problematic for me. When he was released at the beginning of 2014 that I was not able to get installed it with the exception of two occasions, the first being several months ago and the second time, a few days ago. I have constant pain to try to get the update of KB2919355 until recently. What finally got the update installed was opened as administrator command prompt and type the following commands,

  DISM/Online/Remove - Package PackageNameackage_for_KB2919355 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.1.14 

  and then

  DISM / online/cleanup-image /startcomponentcleanup

  So now, the update of KB2919355 has been installed. Only one problem: like the first time I had the installed, Windows Update leave commissioning. As the HP splash screen that normally appears during the startup process appears after about 3 seconds, Windows displays an error Stop, and for a fraction of a second will display SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error, which as I read, is related to the graphics drivers. The thing is, after the cancellation of the update (the computer in Mode safe start put Windows automatically uninstall the update and everything goes well after), then go in and uninstall the graphics driver, restart, reinstall the graphics driver and reboot again, and then reinstall the KB2919355 update, the problem recurs. I also tried to download and to install the new update of firmware for my particular DESIRE machine which was released a few days ago, but which has not helped either.

  I'm really stuck. I looked up and down, and I scoured Internet for anything that might help. I need to update KB2919355 be installed because without it, I can't book my free upgrade of Windows 10. This laptop is about 2 years and a half old now, so it fulfills all the prerequisites for Windows 10.

  Please do not suggest that I do a Refresh of the system or a system reset, as I have no way to back up my programs, that which some I would not be able to reinstall because I have more drives for some of my programs. Also, I can lose to save him for some of my games.

  When people ask me "What's up?", I always say 'the CAP '.

  So that seems to have solved the problem that is described in this post here. I followed the suggestion, which was to uninstall the driver, SPDT DuplexSecure (which has something to do with the SCSI devices, I'm not quite sure) using the SPDTinst (download here) and now it seems that Windows has started without crashing after installing the update KB2919355. I'll check my Windows Update history and see if it is there.

  Low and behold, a year to be really behind value is ultimately more. I have successfully obtained the update of KB2919355 works on my computer.

• Reviews of Ubuntu does not start after the installation of updates

  I have a Windows 10 host and a guest Office Ubuntu 15.10. Ubuntu installs and runs fine until I have install updates, and then it gets so far through the boot sequence, but blocks trying to start the GUI.

  What should I do?

  Hello

  can confirm: after installing the last invited Ubuntu patches of the slaughtered 3.16.0-62 core during startup.

  Latest posts is: failed to start the vmware services.

  logfile VMware stops at the loading HGFS subsystem.

  To access the guest computer resolution: Boot with advanced options (hold SHIFT to start, until the menu loader grub is shown). Now select boot option (!) lower than 3.16.0 - 62.

  With 3.16.0 - 60, the guest operating system will start normally. Reinstallation or reconfiguration of the vmware tools don't fix this behavior. If something seems broken with kernel 3.16.0 - 62

  Any solution with core 3.16.0 - 62?

  Best wishes

• Two partitions of Windows after the installation of Boot camp?

  I have a new Macbook Pro from 2015, with OS X 10.11.3 El Capitan.

  I put the iso file of Windows 10 in the download folder and installed using Boot Camp assistant. After formatting the Bootcamp partition in the Windows installation guide and complete the installation, everything seems fine.

  But.

  When starting with the alt key to choose between Mac and Windows, I have now two icons Windows as well as Mac icon. A my Windows installed 10 boots, and the other icon starts the installation guide for Windows. Why is this last icon of Windows and the option to start the installation of Windows always there?

  Hi there Jer2015,

  Looks like you see an additional drive when you hold down option and start your computer, which will begin installing Windows again when selected. That sounds to me like you have the USB plugged with ISO on installation files. All you need to do is unplug it from the computer and it should no longer be an option.

  Thank you for using communities of support from Apple!

• Re: Vista will not start after the installation of update

  About 2 days ago I updated 2 Optional updates through windows update. It was - Input - Synaptics Synaptics PS/2 Port TouchPad
  and somethind to do with sound hdmi (don't know why I got this update ' cos I do not have a hdmi and I accidentally installed it as well).
  After that installs Vista won't start so I did a restore of the system in safe mode, and she came back to life, however, isn't in better shape, will probably not not to install Vista all over again.
  So be careful when you install these updates.

  It's weird that they came with windows update. As much I know usually windows update does not update if not needed harddrivers...

  You need to update your hardware drivers from the Drivers Toshiba download site and not from Windows update because no one knows if they interfere with the drivers of Toshiba.

• Satellite P850 take about 4 minutes to start Windows after the Welcome screen

  Hey

  My SATELLITE P850 take some time after the Welcome screen to start windows, it was like this the first time that I get it.

  Any help or idea?

  thx a lot

  Have you changed anything in your system or maybe the HARD drive? Did you create a partition?
  4 min to complete the startup process is really long
  Have you installed an antivirus software? Maybe a Norton Antivirus?
  I got this software installed on my laptop and it took an eternity to boot the system.
  I replaced Norton Antivirus with free ware software called Avast!.
  Now the Windows starts for 30 sec