Failed to update causing memory question

Similar Questions

• on iPad Mini iOS 9.2.1 update fails due to low memory, even though 57 GB are available

  iOS 9.2.1 update failed due to low memory, although 57 GB was available.

  What is the cause and the fix?

  EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.

• put db failed for "cannot allocate memory".

  Hi exports BDB.

  
  

  I met a problem that put the db failed for "cannot allocate memory". From cmd shell "ps", consumption of memory app was not high, it seemed that just BDB can not allocate memory. Here are my questions:

  (1) if use get db or slider with DBT indicator 0, where BDB will allocate memory? (DB cache?)

  (2) I put in cache 16 MB by db_env-> set_cachesize, there are about 10 databases in the environment, it means all the cache 16 MB part 10 db or each has 16 MB cache?

  (3) if there is no memory leak in the app, what would be the possible reasons for "cannot allocate memory"? How I debug this?

  (4) a database in the application has about 100 k records each about 500 bytes data, this database must be walked several times by the cursor. If use DBT indicator 0, will free the memory allocated by the cursor immediately after the cursor close? How much memory would be allocated during the crossing of the database?

  (5) cache is multi-threaded safe? If one thread changes the memory allocated by the BDB using cusror get with DBT indicator 0, other threads bed dirty data possibly?

  BRS,

  Min

  Hi Min,

  The error "Cannot allocate memory" can be caused by using a lot of resources, whereas you allocate spaces for them in advance, resources include locks, mutexes, etc.

  (1) the memory will be allocated heap if you have not defined a function alloc.

  (2) all databases in an environment share the same cache (16 m here).

  (3) as mentioned, the error can be switch to the allocation of lock, mutex, and other resources. You need get the exact location where the error occurs.

  (4) I think that you asked the question on the DBT indicator 0. The memory will be allocated from the default heap and be linked to the cursor. It's transitional, which means that it can be overwritten by the next HBD-> get and released until the cursor closes. More information can be found here:

  https://forums.Oracle.com/thread/2560134

  The simple description of the program, the error seems to be caused by not enough definition of locks and lock objects. Page latch is usually used by Berkeley DB, and if you enable the locking subsystem, by default each page will be locked until the cursor closes. If your database has a lot of pages, then several locks and lock objects are needed, so set the number before opening environment, since the number (1000) default may not be sufficient in this case.

  To avoid setting so many locks and locking of objects, you can try the DB-> set_lk_exclusive, because it hangs on the database instead of pages.

  Another way is to restructure your program to divide operations both in number of sliders/transactions and begin the next curor/transaction after previous finishes. And if you use only the sliders to make so many read operations, you can also evaluate a level of isolation as DB_READ_COMMITTED instead of the default level, and it can avoid divide.

  This thread can help you on this:

  https://forums.Oracle.com/thread/2557981

  5 data from HBDS-> get flagged 0 failed with the cache. Cache is thread-safe to provide write atomicity. If you care about the consistency of your program in environment multi-threads, you must turn on locking and transaction subsystems.

  Kind regards

  Winter, Oracle Berkeley DB

• Is IOS 9.3.2 update cause any problem on my phone?

  Is IOS 9.3.2 update cause any problem on my phone?

  What are all the specs is added to this update.

  My phone looked up crash when you receive an incoming call. This happens twice in the day.

  Can you please send back with your answer to all these questions.

  No problem causes update for devices, updates are made to overcome bugs and Yes, it is good to update your device to the latest version.

  The specifications are bug fixes and improves the security of your iphone.

  After updating your device works very well, otherwise ping - me and clarify the problem.

• Windows Update Causes startup problem

  I have an interesting problem with Windows Update (or apparently is from Windows Update). I am running Windows Vista Ultimate 32-bit, if that info is needed. There are two updates I have not install, as I am not sure that is the cause. The updates in question are Internet Explorer 8 and Windows Defender definitions 1.63.604.0. Here's what's happening.

  When you restart after Windows updates, the computer starts with a black screen with a mouse pointer. That's all. Happened every time I tried to start after the pdates. I can reboot into SafeMode very well, is apparently a problem driver or update.

  I also installed DivX on the computer, but it seemed to work as I could watch .avi via WMP thereafter, so I excluded. I thought that if there was a problem with it, it would not have worked in the first place, but I thought it was interesting.

  In any case, the only solution I found doing a system restore and do not install updates day or DivX, since technically I don't know which is the cause. I had to restore the system 3 times already and I didn't continue to do because this computer was very expensive and I don't want to ruin the hardware or something.

  Someone knows something about an error with updates, or perhaps with DivX that may have caused this. The computer works fine without the updates or DivX, I just want to know what could be the real problem so if it is only one of the 3, I can install the other two at least.

  Change your update settings, install the updates one at a time, hide the problem:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• I get this KB2481109 update and it still fails to update it's a virus

  I get this KB2481109 update and it still fails to update it is a virus and how iI to get rid of this?

  Hi Judy,.

  1. do you get an error code?

  2. who is the antivirus installed on the computer program?

  Since this is a security update, there is a chance of infection from malicious software on the computer. We will analyze and identify the cause of the problem.

  Method 1:

  You can reset Windows Update components and check.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  Reference:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2: Virus Scan

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

   
  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

  Hope this information helps. Response with status so that we can help you.

• Vista updates causing interference day and PC crashing.

  Greetings,

  I have a tiny little problem. It seems that the new updates for Windows Vista has been causing some intolerable freeze and crash my PC. I don't understand quite updates are causing it. How ever I can officially say that BEFORE I updated my machine it worked almost perfect (except for the graphics). I won't be pesmistic, it really worries me. On top of her crashing and freezing. I also noticed a sufficient amount of gain and loss data. I.E. I have several backups of games on pc before I played. but when I'm done with extracting files and remove approximately "20" of them only '13' will do for the recycling bin, so my (OS - operating system) * HDD partition * wins extra/hidden files. I also noticed that my PC has not been suggested to download SP2 from the Auto Update Center. I had to recover this file manually on the microsoft site. Please explain this problem and please not to recommend a re-installation of the operating system... I have already this is plenty of time to do it either.

  Side of a person responding to this hopeful message. because I have problems with my pc could you please send me a response @ (* address email is removed from the privacy *) thank you.  "ACEs".

  You will get the best help for your question of Windows Update in the right Forum; link at the bottom of this answer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.

  After believing that my computer has somehow a virus and spend hours trying to solve the problem, I think that an update is causing the problem: I solved it by following these steps:

  KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.  Resolution: restore to before the update has been activated Windows installed updates and hid the update, so it would not automatically reinstall and the program works.  Please, difficulty of the update or rewrite it.  I can't imagine that I'm alone on this breaks.

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  You can find support for the installation/uninstall/upgrade / upgrade to Windows Live Essentials in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  Note: In the not-too-distant future, Windows Live Essentials 2011 QFE2 will be a mandatory update.

• This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update has not as well.

  This is the first time the following: failed: 1 update or the errors found Code 80070643. I followed through the Fix code he doctor. This morning the automatic update 4/16 showed failure: update for Microsoft Office PowerPoint 2007 (KB 24664594)

  Hi William,.

  First try the following article: http://support.microsoft.com/kb/971058.

  If this does not work, try this link: http://support.microsoft.com/kb/923100.

  While I'm not quite certain that the first will succeed, the second is a common and often recommended solution that has helped a lot with this error code.

  I hope this helps.

  Good luck!

• 82566MM security update causes problem

  I use a network with fixed ip addresses setting and a 300 tinkpad X.

  After installing Intel 82566 MM Gigabit Network Connection update via Windows Update on every reboot

  the default gateway is removed. I can enter it manually in the network settings, but this isn't the way it should work.

  Does anyone have a solution for this?

  Concerning

  Johann

  I'm terribly sorry. Not the NIC driver update caused the problem. The problem came with Vista Service Pack 2.

  I found the following solution and it works now fine again:

  1. open the registry, regedit.exe
  2. go into the path: HKLM/System/CurrentControlSet/Services/Tcpip/parameters/Interfaces.
  3. here you must select the CLSID of your network card when you change the settings. You'll probably recognize it watching the IPAddress value which will have IP address for this adapter.
  4. open the value 'Passerelle_par_defaut' of doubleclicking it. You will see a list of all the bridges that disappeared! (maybe in your case it will be single, in my case it was because of the many test multiple addresses) Most likely, the first line will be empty. I don't know how this little flaw can be a big problem. However, if you manually delete the first empty line, click OK and restart your system, everything should be working again fine.

• Update for Windows 7 (KB2345886) fails to update _

  Update for Windows 7 (KB2345886) fails to update

  Download size: 421 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios. After you install this item, you may have to restart your computer.

  KB2345886 is an OPTION, not the security update. Feel free to hide it.

• Virus or update causing no response to keystrokes

  I have just got rid of the Conficker worm and advice said, it's important to keep up with Microsoft Updates.  I guess I had disabled updates updated long ago many things at the same time.  When I came back to the machine, he said updates complete, restart the computer.  On restart I got two blocks of messages "the 654 ordinal not found in the dynamic link library iertutil.dll" - and -"Error loading C:\WINDOW\system 32\iedkcs32.dll the operating system cannot run %1."  I clicked OK on each one and they went and computer seemed to work fine until I tried to sign in my email.  I have no response to the strikes and could not sign.  My mouse has seemed to work move me and I could type in the address bar and in the start menu, run the section for the keyboard works.  So, it is a virus thing or updates caused this?   I have not the slightest idea where to look.  I use another computer to create this message.

  I was running from IE7.  When I upgraded to IE8 the problem disappeared.

• KB2345886 failed to update for windows 7 x 64 os

  really need help with this one.  Not computer savvy.

  KB2345886 failed to update for windows 7 x 64 os.

  Thank you

  sednfavor

  Send

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c82fa2ea-6c79-49D1-9AF1-c5c13287dea9>

• Updates cause a blue screen after reboot

  Get a blue screen when you start the computer after Windows made of automatic theses dates
  KB978262, KB971468, KB975560, KB978251, KB979099 and KB890830

  Hi Randy Gauthier Leclerc,.

  Could you give us the exact error message you get started?
  Are you able to boot to the desktop?
  Were you running any system restore after installing these updates?
   
  If you are able to boot to the desktop, we can edition all updates then install them one by one and check what update causes the update. We can avoid the update conflict by doing this.

  It is a possibility that one of the updates is at the origin of the conflict. I advise you to uninstall all updates and check. You can install these updates one by one, then check update is conflicted and you can avoid this particular update.
  You have installed for a list of the latest updates, follow the steps below:
  1. click on start and in the search bar type Windows Update and press ENTER.
  2. click on "View Update History".
  3. now click on installed updates.
  4. right click on the update you want to uninstall, and then press Ok.
   
  For more information see the link below:
  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Security for Microsoft Office Word 2003 (KB2598332) update fails to update

  Gentlemen: each of these updates have failed:

  Update of security for Microsoft Office Word 2003 (KB2598332)

  Update for the filter of junk e-mail in Outlook 2003 (KB2598343)
  Update of security for Microsoft Office 2003 (KB2598253)
  Update of security for Microsoft Office Excel 2003 (KB2597086)

  Please help me. It maybe the updates above are not necessary.

  Thank you!!

  Mike

  Try the following a.

  We will empty the download folder & then try again measured.

  Start > type cmd > and press enter

  type in
  net stop wuauserv 

  Go to Windows Explorer.
  Look on your system (usually C) drive and see the name of the Windows folder. Like Windows or WINNT.
  Edit following as appropriate.
  If your Windows folder is C:\Windows.  Look at this file
  C:\Windows\SoftwareDistribution\download

  If you find files in there, remove them.  This file is where the Windows Update files are stored downloads.

  Return to the command prompt window.
  type in
  net start wuauserv 

  OUTPUT

  Reboot & then run manually check the updates in Windows Update, etc, etc...
  When you get to Windows Update, a custom scan updates. Take (accept) those marked critical or Important.
  Those that are marked as "optional" decline.
  NET Framework or Silverlight updates offered, select not them & the other (do all .NET Framework or Silverlight updates in separate tracks).
   
  Have infinite patience so that it scans and it's work.
   
  When you are prompted to restart Windows, please do. Allow it to restart.

  If and only IF there is another failure, then let's you use NOTEPAD & doing research in the Windows Update log (using Notepad)
  usually at C:\Windows\Windowsupdate.log or C:\WINNT\Windowsupdate.log
   
  Copy and paste here the last 60 lines out of this newspaper, for review.
  Go to end of the log of the last entries and get ratings of the error.
  You can use the keys on the keyboard CTRL + END to reach the end of the file. Then download the last 60 lines & copy & paste here in response
   
  See the Microsoft KnowledgeBase article
  902093 KB how to read the Windowsupdate.log file
   http://support.Microsoft.com/kb/902093

  If this can help, mark (click) response & or relatively useful as actually.