Failed to update the BIOS on Satellite A500 - 1C0

Similar Questions

• Re: Shoul I update the BIOS on Satellite A500?

  Hi, people

  I found the new Bios available for my knees, but I'm afraid of the upgrade.
  In any case, should I update or to stay with the current one?

  Thank you

  Hello

  You have a few problems with the laptop or the current BIOS?

• Impossible to update the BIOS on Satellite A665

  Hello

  I desperately need help with update my BIOS on Satellite A665 that my battery won't charge and the site said to me updated the BIOS, but it is not letting me update battery is less than 10%.

  Please someone help me because I have no way to use the laptop without power still present.

  Hey Buddy,

  Can you charge the battery when the laptop is turned off? Usually battery LED should show you white and orange color to the loading process if the battery is fully charged. And then start the computer and update the BIOS.

  Try to update the BIOS on the pre-installed Windows version?

• Problems after updating the BIOS on Satellite Pro P200

  I recently buy a Satellite Pro P200 running Windows Vista Business. Yesterday, I updated the BIOS to the version 1.50 supplied with the machine to 1.80 available on the Toshiba site. I double checked that I was using BIOS correct update for the Pro P200 Satellitel running Vista.

  After updating the BIOS, I have now two problems:

  1. whenever I start and join the office, I get an error message "record of Vista has stopped working". This problem has been identified as toshibavistaregistration.exe here: [link: http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=99805]

  2 Control Panel > system now shows the processor and the memory (RAM) as "not available". Execution of the diagnostic PC Toshoba tool and looking at basic information show also no information on the memory (RAM) Although the processor information here. There may be pieces others missing too under the eyes of list shorter than before the update of the BIOS.

  Basically, I want to get everything working again as it should, but cannot find any information on these issues.

  After further review, it appears that the update of the BIOS is not the cause of the problems.

  Immediately after updating the BIOS, I had a major system crash. It turns out that this is what has caused problems.

  After a system restore to a point before the update of the BIOS and the major system crash, now everything is working again with BIOS version 1.8 in place.

• Update the BIOS for Satellite U400-10O required

  Hello world

  I have a SATELLITE U400-10 oC (PSU40E-00R00EG3). It is an old product, but once I always love use regularly.

  Recently, I bought a battery for this device upgrade. Unfortunately, it does not recognize the laptop. The work of the battery, but I don't you all information about the charge level. I tried various tricks 'reset' (removing ACPI Microsoft in the list of the drivers installed, running down the battery completely etc..).

  I think the BIOS might be exceeded and I'd like to update. Unfortunately, the Web of Toshiba site does not list updates for him more. Still, someone has access to updates the BIOS for this?

  The BIOS is a Phoenix currently to version 4.70.

  Hello

  N my BIOS of opinion has nothing to do with it. Battery can be replaced, and if you use compatible batteries they should be recognized correctly. Here is the list of all compatible batteries:
  PA3534U-1BAS/BRS
  1BAS/PA3536U-1BRS
  PA3634U-1BAS/BRS
  PA3635U-1BAM/BRM

  Purchased one of these and original Toshiba product (label Toshiba) or a product without a name?

• Updated the BIOS on Satellite A30

  Hello

  I'm about to update the BIOS on my computer Toshiba Satellite A30 laptop (Service Pack 3).
  I downloaded the BIOS updated and decided to update the BIOS from Windows such as recommended on the Toshiba site.

  On the site he mentions before the BIOS upgrade, please ensure the following:

  Laptop BIOS update:

  Before upgrading the BIOS level, please do the following:
  -Portable is in stand-alone mode.
  -Laptop is plugged into the mains.
  -Laptop computer must be in boot mode and not recovery mode.
  -Remove all PC cards.

  1 Windows based BIOS update:
  1 extract the zip file containing the BIOS upgrade to a temporary folder.
  2. ensure that all open files are saved and all applications are closed.
  3 run the *.exe extracted to the temporary folder. Follow the instructions on the screen.
  4. the BIOS update will be done automatically.
  5. after a few minutes, the computer will restart automatically.

  I'm not sure of what he means by laptop computer must be in boot mode and not recovery mode

  What is the startup mode and how to fix my laptop in this mode?
  Can't I just run the file downloaded from my office?

  Thank you;

  As mentioned by Garrett; You must download the package from the BIOS, then unzip it and then you can run the exe file.
  Usually it s no matter where the package was decompressed!

• How to access the BIOS on Satellite A500 - 1 2

  Hello
  Could you tell me how get you into the BIOS. I have laptop A500 - 1 2. I've updated the Bios and I can't. Please help me.
  Czarek

  Hello

  You can access the BIOS by pressing the F2 key immediately after that the laptop was turned on (after pressing the power button).
  You can press F2 repeatedly to be sure it worked 100%

• Re: update the Bios Z830 Satellite: "this computer is not supported.

  Hello

  I replaced the Windows preinstalled with an installation of Fedora 16, - which works perfectly btw - and hope
  to solve the "Windows only Bios update problem" with a Windows 7 bootable USB drive, which works again
  great so far, but the BIOS160_EC130_WIN.exe said simply: "this computer is not supported." ...

  Any ideas appreciated.

  Bernd

  Hello

  You cannot update the BIOS under Linux and using a victory based version of the BIOS.
  You will need to use the image of preinstalled Toshiba.

• The BIOS on Satellite A500 - 18Q recovery procedure?

  Hello!

  I tried updating the BIOS to improve the performance of the laptop but the update was corrupted and now the laptop will not boot.
  Can you help me to recover the bios?

  Thank you much in advance.

  > I tried updating the BIOS to improve the performance of the laptop but the update was corrupted and now the laptop will not boot.

  In this case, you will need to contact a local ASP.
  The ASP technician will be able to refresh the BIOS with crisis BIOS disk.
  You can do this because this drives and trad-BIOS update is available only for the technicians of the ASP only :(

• Problem updated the BIOS on Satellite A300

  You update the BIOS in the model of laptop A300 psagce after the update, the device to be exposed to something.

  Please help very necessary

  To be honest, I don't understand how you mean exactly.
  Can you please explain a bit more detailed what you have noticed after updating BIOS exactly?

• Z420 workstation: failed to update the BIOS on Z420 Workstation

  Hello

  I'm having a problem with the update the BIOS on a workstation Z420. Product LJ449AV number.

  The current version of BIOS is 1.02 09/03/2012 and the latest version of BIOS is 3.88 26/05/2015. I download the latest version of the BIOS, in the sp71579.exe file from here: http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5228608&swItemId=wk_149656_1&swEnvOid=405...

  When I try to use the HPQ Flash BIOS update utility, a message appears at the end of the stage of the new BIOS flashing indicating that a fatal error noccurred when flashing the BIOS. Error code = 0x0D (unknown error code). Here is a copy of the HPQFlash.log file:

  07/30/2015 09:41:04.228
  07/30/2015 09:41:04.229  --- START NEW HPQFLASH SESSION, HPQFLASH version 4.40.1.1 ---
  07/30/2015 09:41:04.231  Command line =
  07/30/2015 09:41:06.752  System name = HP Z420 WORKSTATION
  07/30/2015 09:41:06.753  System ID = 0x1589
  07/30/2015 09:41:06.754  System Serial Number = 2UA22509HT
  07/30/2015 09:41:06.756  AT-p supported = 0 (0:  not supported, 1 supported)
  07/30/2015 09:41:06.757  Version of BIOS in system:
  07/30/2015 09:41:06.758     Family = J61
  07/30/2015 09:41:06.759     Major version = 0x1, Minor Version = 0x02
  07/30/2015 09:41:06.761     Release Date = 03/09/2012
  07/30/2015 09:41:08.034  The binary to create HP_TOOLS partition is not present: 'C:\SWSETUP\SP71579\HPQFlash\Installer.exe'
  07/30/2015 09:41:08.096  Version of BIOS in ROM update (in CAB file):
  07/30/2015 09:41:08.098     Family = J61
  07/30/2015 09:41:08.099     Version = 3.88
  07/30/2015 09:41:08.100     Release Date = 05/26/2015
  07/30/2015 09:41:56.806  Don't need to Backup BIOS files.  Either system is not a laptop or BIOS does not support backup from USB device.
  07/30/2015 09:41:57.809  ***** Start FLASHING *****
  07/30/2015 09:41:57.833  Start Saving Original BIOS Contents
  07/30/2015 09:45:40.720  End Saving Original BIOS Contents
  07/30/2015 09:45:40.723  Start flashing (Write)  Attempt #1
  07/30/2015 09:45:40.724  Start Flash Rom Image (Write)
  07/30/2015 09:46:41.003  End Flash Rom Image (Write), bStatus = 0
  07/30/2015 09:46:41.006  End flashing (Write)  Attempt #1
  07/30/2015 09:46:41.008  ***** END FLASHING PROCESS *****
  07/30/2015 09:47:39.207  Exit hpqFlash:  Return Code = 0xd
  07/30/2015 09:47:39.209  --- END HPQFLASH SESSION ---
  

  When I try to boot from a USB stick and use the BACK Flash utility, the following text appears on the screen:

  Transferring System ROM... 100%
  Verifying System ROM...
  
  Error! System ROM is invalid.
  

  I tried to download sp71579.exe using two different computers on different Internet connections using different web browsers, but the same problems occur. I also tried to disable the antivirus, but that did not help either.

  Thanks for any help you can provide!

  "Old way" is the quote that comes to mind, and there is a link to a post on the Z620 mirroring of your question:

  here

  With very old BIOS versions like what you have, you will need to step up the BIOS versions in order.  You don't need to intensify in each version, just a couple of big no.

  Keep us updated... I think you will like the new BIOS versions, and I post it is better to update the BIOS to go into BIOS, rather than inside Windows.

• Impossible to update the BIOS on Satellite Pro C

  Hello

  Tried to update my bios version 1.90 but failed due to the following message:
  Message in the window "install UEFI winflash 0.02.

  There is an error occurred, please check the items below.
  Bio version above 190.
  Battery capacity more than 10%.
  AC is attached
  Program will be closed.

  Thanks for any help

  What model of laptop do you have?
  What is the reason for the update of the BIOS?

  You have problems with your laptop and you want to fix the BIOS update?

• Question about updating the BIOS for Satellite M70 (PSM71)

  Hello!
  On the download page, there is an update of the bios 08/07/07 - 1.50 - WINNER, but I already have this version, y at - it a mistake? This version in the old...

  Thank you!
  Ciao!

  Hello

  On the download page, there are two BIOS available for your laptop model:
  -1.50 aged and
  -new 5.10 and this one are designed for Vista.

  If you want to install Vista on your Satellite do BIOS update first.

  All that s!

• Update the BIOS on Satellite A30 303

  Having a Satellite A30-303.
  With no intern work DVD.
  Have a usb DVD boot.

  I wonder if I can update Bios from Ubuntu. I need execute a .exe.

  Or if I can take a floppy and run the file BACK.

  Hello!

  For the Satellite A30 only one based on windows BIOS update is available.
  I think this will not work on Ubuntu and install Windows to make this update.

  Normally on Windows systems, you need to download the BIOS update, extract the .exe file and start it. That's all.

  Good bye

• Update the Bios of satellite P10-304:-the size of the Rom file is incorrect

  P10 - 304 - downloaded Update Bios, but when I went to run it I get the message "the size of the.
  ROM file is incorrect. What can I do now?

  One question; Why you want to upgrade the BIOS?

  I studied on the knowledge base of the Toshiba site and found this:
  I always get an error message: the size of the ROM file is incorrect.
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  It will be useful.