Failing 10Z NB200 standby or Hibernate mode

Similar Questions

• XPS cannot switch to standby or Hibernate mode

  Hello

  I saw a similar post here, but I couldn't solve the problem...

  My Dell Studio XPS 13 has a strange problem:

  When I close the screen (it closes down), the computer is not enter standby or hibernation mode, and rather that the screen turns black. 'normal' in the keyboard lights stays on and lights side indicate that the computer is running always full power. You can say that on hearing the noise of ordinary fan.

  Trying to put it to sleep by start = > sleep/hibernate - the same thing happens - computer still works but the screen goes black.

  Basically, therefore it is blocked until I forced closure (by the close button).

  Should I update the BIOS? would it be useful?

  I use windows 7.

  Thank you...

  Hi oren_m,

  Please check the power options are set to sleep/hibernate for the option "when I close the lid. (See attached snapshot)
  If the problem persists, please reinstall the graphics driver. Enter the number of Service and the appropriate operating system and download the latest video drivers from the link below.

  http://Dell.to/T2hKYc

  

• Portege M750 restarts after the standby or Hibernate mode

  Since I remmember I use my laptop with activate the sleep and hibernation features.
  A couple of days, it started not to restart after the sleep or Hibernate mode.

  You have to take the battery or current alternative, then it starts but without taking the sleep/hibernate.

  Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some sort of a code long and short flashes.

  This happens with different OS cause I tried to reinstall and the problem persists.

  > Another thing is that when you press the switch on the alternating current led, which is normally green button, it flashes yellow with some kind of code long and short flash

  I know that if there is a failure of memory the * power indicator * flashes repeatedly on and off the power (0.5 sec) if there is an error in the slot A the indicator would blink twice in orange, and then green.
  If there is an error in the B slot, the LED will Flash orange and green twice.
  If the error is in the two slots, the LED flashes twice green and orange.

  By the way: it's your BIOS up-to-date?

• HP elitebook 2530p wake from standby or Hibernate mode

  Hello world

  I have a problem with my 2530p elitebook but I do not know how to solve it, please give me your suggestion. Here's the question:

  After placing the computer into sleep or Hibernate mode, it seems quite dead. The keys that are supposed to wake the computer have no effect. When I press the button to wake up the LEDs light up and the fans turns on but the screen remains black. Finally, I have to stop it using the switch, then start it again. I am running XP.

  I'm looking forward to your reply.

  See you soon,.

  M

  Try flashing the latest BIOS revision for your laptop, it seems the problems of sleep and hibernation. Before you do, check your BIOS revision when you start the configuration utility.

• Windows crashes after the standby or Hibernate mode

  I have win 7 64 bit updated for vista. There have had no problems until now, but in these last days, whenver I sleep or put nohting happends Hibernate my PC, and then I have to start windows in safe mode or in normal mode.

  The pc instead of sleep or Hibernate crasehs.

  Thank you

  KS

  Hello

  you have the STOP code 9F?

  If so, try to download the following patch:

  KB975599 - Stop error message when you upgrade a computer that is running Windows 7 or Windows Server 2008 R2 standby , Hibernate or when you restart the computer: "0x9F".

  Go to following site http://support.microsoft.com/kb/975599 and click on view and request hotfix downloads , select the platform (x 86 or x 64) and type your e-mail twice and type in the captcha ad click request hotfix.

  After 1 minute, you have an email with the link to download an exe file. Use the password is contained in the email to retrieve the update.

  Install the update and restart, now, the problem should be solved.

  If you still crash, download the Minidumps, as already suggested No.Compromise.

  concerning
  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Computer Vista t not shutdown, standby or Hibernate mode

  Original title: this system will not be shut down or sleep or hypernate, it will turn off after approximately 3 times hit shut down
  I just want to know what to go in to solve this problem, thank you

  Hello

  Slow closing the computer may be due to programs start not completed or incompatible device drivers.

  You can follow these steps:

  Step 1:

  First, make sure that you have installed the latest drivers for all your devices.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2:

  Refer to this article and follow the steps:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions

  
  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 to automatically connect to the network after the standby or Hibernate mode

  This just started two days ago after an automatic update Windows 7.  Whenever I wake up my laptop, I have to manually connect to the wireless network.  He used to connect on its own.  Not changed anything with the network or router.  I have the connection to connect automatically, but it doesn't.  He, however, automatically connect when I start the computer.  I tried all the tricks of problems of the past... I see the network and it will connect and works fine after that I have to manually connect.  Just can't understand why, all of a sudden, he stops connection.  Again, this started 2/10 after a Windows automatic update... it seems that all updates have been security patches and I hesitate to uninstall them because I don't really know what one of them is.

  Yes! I think that I fixed it. I tried all this without result. Then it hit me. Turn off the "allow the computer to turn off this device to save power" is fine and good, but what the USB port? They can do this also. "' Go to the Device Manager and do a right click, Yes, the network adapter and uncheck this box, but also do it for the" USB Root Hub "under"controllers of Bus USB.

• Driver_power_state_failure BSOD (blue screen) on the standby or Hibernate mode in Windows 7

  Hernan

  Please provide a fresh link to the files in your sky drive.

  Updated link to update

  https://SkyDrive.live.com/redir?RESID=ED4FED9E957B3A12! 14574 & authkey =! AMPxu8R-BnisNOE&ithint=folder%2c.xml

• Impossible to use the system in sleep or Hibernate mode after installing a new video card

  Have a card GeForce 6200 graphics with latest drivers installed and now I can't use the features of standby or Hibernate mode in Windows Xp System.

  This seems straight - Stand By and Hibernate will usually be available if the video drivers are not updated.

  For your NVIDIA GeForce card, I would do this:

  The best way to reinstall the NVIDIA software is to visit the NVIDIA support web page and let your system and to recommend the best software for your system... or you can find the correct version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the link to the support page NVIDIA for the scan:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

  Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

  When you have done, you can add a fourth "Hibernate" button to your menu to shut down the computer to prevent you from pressing the Shift key to Hibernate (which is good for lazy people like me).

• Portege 4010: No Standby Mode and Hibernate mode

  Dear people,

  After you have reinstalled my P4010, I don't have the standby and hibernation Mode option more.

  I use Win XP pro, SP2, version 2002

  Any suggestions?

  Kind Ragards,
  Jasper

  Hello

  pass under the office-> Rightclick-> Screensaver-> power management.

  Here you can activate the hibernation and I think there must be a point was that you can activate the sleep mode (may be it is useful if you are installing your Toshiba tools).

  BR, Ben

• Hibernate mode does not work on my Satellite L650-1PE

  Hi all

  I have Toshiba laptop Satellite L650-1PE system (psk1je) & windows 7 32 bit & I updated the BIOS to version 2.40... so I can not put windows 'Hibernate' mode... the screen turn off then it turns on again!

  Y at - it an update or what I can do?

  Help please.

  Thank you

  .

  Hello

  Maybe you should enable hibernation, first:
  Do this:
  -Start CMD (control box) in search, type CMD and press ENTER
  -Type powercfg /Hibernate + it +.
  -Close the box and go to Advanced Power Options
  -In advanced options to sleep, expand the sleep tree and disable standby hybrid.
  -Now go back to the start menu and you will see the new entry into hibernation.

• Need to reset the NIC wireless through troubleshooting whenever I brought back from sleep mode or Hibernate mode?

  My system information:
  -Microsoft Windows 7 Home Premium Version 6.1.7600 Build 7600
  -Toshiba Satellite A505
  -PC x 64
  -Intel Core 2 Duo T6600 @ 2.20 GHz 2200 Mhz 2 carrots 2 logical processors
  -Version/date bios: Insyde 1.70, 15/09/2009
  -smbios version 2.4

  The adapter information:
  Connection to the local network - Realtek PCIe FE Family Controller, updated all drivers, since I'm connected wireless but I guess it says "network cable is unplugged" is normal.

  Wireless network - Realtek RTL8191SE Wireless Lan 802.11n PCI-E NIC, put to update the drivers. It is disconnected, but disabled right out of the standby mode.

  Wireless network connection 2 - Microsoft Virtual Wifi Miniport Adapter, drivers updated. I've never installed it... or something... so I don't know why it's here, or what he does. This disappears when I put in sleep or Hibernate mode and then resume, but reappears after a repair. No matter what he always seems to say no 'connected '.

  Problem:
  Whenever I brought back from sleep mode or Hibernate mode, my internet connection is cut off. Trying to connect to my router, I have an error message and invites me to troubleshoot. I allow the computer to troubleshoot and it resets my wireless adapter, which allows everything to work once more. I ran an ipconfig/all using a Hibernate once and it seems that everything is disabled just before I run troubleshooting... "media disconnected". It is not a huge problem of having to run whenever I resume a session, but it's a boring troubleshooting.

  Failure of solutions:
  Updated all the drivers, when all drivers are always updated
  Disable "Allow the computer turn off the device" tab of power for all 3 cards, at the moment it is always disabled
  Disable ipv6 on all cards, at this time, it is always disabled.

  Interesting facts:
  "Microsoft virtual wifi miniport card knows driver or hardware related problems.
  This came after one of the sessions of troubleshooting... What is the microsoft virtual wifi miniport...?

  Sorry if I did not provide the correct information to help solve my problem... just tell my something else I should add :)

  I had the same problem on my laptop computer l500 do not know why it does this, but it was the case I have reactivated "Allow the computer turn off the device" tab power supply for my wireless adapter and it seems to work again.

  I think it worked because he wasn't let go out properly when I slept I hope laptop that yours is just as easy to fix

• Satellite U300-151 plant of the standby or sleep mode extended when WIFI is turned on

  I have a new satellite U300-151. BIOS V3.80 and Intel version 11.5.0.32 wireless (which seems to be the latest driver). Vista SP1

  When return to work of the standby or hibernation mode laptop still crashes if the wireless switch is enabled.

  I am aware that it is an issue being discussed in a number of forums, but apart from references hopeful to SP1 and drivers, that I have not fallen on a solution. SP1 does not appear to have helped to solve my problem.

  All responses - thanks.

  My knowledge of the SP1 could makes some problems because not all drivers are compatible with the new Vista service package.

  The laptop goes down without installing SP1?

• Several issues of the G20 (pixelerrors, IR, standby and Hibernate, TV)

  Hi people!

  I bought a g-20 a few weeks ago and from the beginning I had several problems with my laptop. I hope one of you can help me! Moreover, it is the G20 with TV Tuner and things supplied with it...

  (1) I have a pixel on the screen error. As I use the black background its not very nice. does anyone of you have also pixelerrors? or are all your screens ok?

  (2) I would use internal infrared to connect to mobile phone. Unfortunately, there is no driver or whatever installed, so IR does not work?

  (3) I had the problem that when I try to go sleep or hibernation, the system hangs up and stops. I reinstalled the laptop complete with the recovery and understood, that, when the bluetooth driver is installed, this error occurs. Anyone know how to solve the problem that the two works?

  (4) I'm from Switzerland and use cable television. I connected with the laptop and installed MCE channels via the postal code and so on... Well, it scans through all, but actually I have maybe 10 channels work proberly. on about 50 to television. on television, he works all fine, but the same line does not all channels on laptop. is it possible to use other tools to watch television? or scan the frequencies manually, then could I myself check and tune the channels myself? for example, I also use teleclub (identical to the first in Germany) and it should be a signal that is decoded on the wire. but the laptop can't find the channel or its does not work.

  (5) when I am in sleep or Hibernate mode (after reinstalling I just does not have bluetooth (see above) then it works) the laptop itself always starts at the 0820 in the morning. so no one does anything, it starts from only. any idea?

  I hope I have now all the errors found and explained. After all, I am not very satisfied of all. The G20 is a laptop of luxury of the upper priceclass and early hurts only. As for me, most of the included items are for me to work (tuner TV, IR...) I bought this laptop just because of that sort of thing. and it was written anywhere, the tuner can only work with the qosmio player or the IR does not work.

  So I hope that you are my solutions where I can get help and forget about my troubles ;-)

  See you soon

  Atanvarno

  [Edited by: admin]

  Hello

  As Chris said, aren't serious misconduct. You should check the manual which is preinstalled on your laptop exactly. You will find lots of information on IR, Bluetooth, Qosmio Player, etc. I m you will find a description on this issues.

  Good bye

• Satellite A300D - 15 c - hibernate mode has disappeared

  I have a quite an old laptop Toshiba Satellite A300D - 15 c.
  First years everything worked fine. Ago about half a year in hibernation mode disappeared. Now when I press the sleep button just the screen goes black. But the computer remains switched on.

  How can I get to computer go at least in sleep mode?

  Can you offer more useful information please?
  What operating system do you use?
  You can use FN + F4 or FN + F3 key combinations?

  How do you know that hibernate mode has disappeared? Where does it lack?