Fails 2 windows xp load at startup

Similar Questions

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Why some of my icons to the taskbar sometimes fail to load at startup?

  Can anyone suggest why some of my icons on the taskbar often fail to load at startup.  I have Win7 set to display all icons (IE do not hide)

  Thank you very much

  Hi Mike,.

  Here is a checklist that you can go through potentially solve your problem. When you have gone through the list, re - start of course to see if the icons will load at startup after you perform these steps:

  (A) uncheck "Auto-hide the taskbar", as appropriate:

  .. Right-click on the taskbar, select properties and find 'Auto-hide the taskbar' tab taskbar

  (B) turn off the composition of the Bureau:

  1. right click on computer > properties

  2 advanced System Settings

  3. in the course of execution, click settings

  4. check (enable) or uncheck the Enable (disable) the Composition of the Bureau

  5. apply

  Updated C) drivers:

  Maybe it's the drivers for your hardware components that need to be updated.  Although Windows 7 tries to install drivers for as much as possible, the drivers - who often change - may not be the latest film from the manufacturer's Web site.

  You can check the latest updates of Windows and install the latest drivers available. To do this, follow these steps:

  1. click on start, all programs and then Windows Update.

  2. click on search for updates on the left of the screen.

  3. If updates are available, go ahead and install them.

  You can also check for the drivers from Device Manager.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. ?

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2 search for graphics cards and expand it. Now, right-click on it and select Properties.

  3. click Driver tab and click Update driver. Windows will now try to find the latest drivers for the graphics card.

  4 restart the computer after installation and verification.

  You can also follow this link to update the drivers:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  In addition, go to the website of your computer manufacturer and check if the latest driver updates are available.

  (D) close all programs in the Notification area:

  Try closing all programs that are running in the area of Notification and control for the issue. See the link below.

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

  See also: http://social.answers.microsoft.com/Forums/en-US/w7desktop/thread/4afc03fe-4a1c-4fe0-922c-c4b140b8ffba

  (E) additional:

  Problems with the task bar are also a known issue and has been submitted to Microsoft. Check out the forum following response for more information to help you find a solution:

  «The incredible shrinking taskbar»

  http://social.technet.Microsoft.com/forums/en/w7itproui/thread/4a8b55ca-B80B-41C8-8ed1-a3a1e1c1eb1b

  "Hide the task bar on the left side of the screen will not display after the passage of users."

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/78c2b784-af8d-4D8D-908b-587abe262dda

  Hope this helps,

  Steve <> Microsoft Partner

• Error loading at startup

  on startup, I get two error loading. 1 c:\windows\rnmshk.dll. 2 C:\windows\oxorefozuzi.dll the specified module could not be found. I click ok on both and operating of computer seems ok. But every time I start up I get the same error of loading messages.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
  .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony! Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Stuck on Windows Resume Loader quick screen with USB keyboard, so I can't answer

  Windows Vista has not recovered to sleep, so I turned off computer and rebooted.  Now, I get the message Windows resume Loader

  "The last attempt to resume the system from its previous location failed. Attempt to retake?  Continue with the system summary or remove data restoration and menu system start-up. "

  I have a USB keyboard so I can't use the arrow keys, or enter key, so it's just sitting there. My computer has no PS/2 keyboard entry. I tried to hit the F8 key on startup (as well as the F12), but I can't get another screen. How to answer the question with a USB keyboard?

  Found the solution. Keyboard has been plugged into the USB port on the monitor.  Cable keyboard switched to the USB port on the computer, and then click keyboard worked, so I could answer the question. I chose "Delete restoration data and proceed to system boot menu."  Everything works fine now.

• message "windows cannot load the locally stored profile. Insufficient rights or a local profile damaged

  Loading registry

  have it on my computer, docs, most missing desktop icons.  message "windows cannot load the locally stored profile.  Insufficient rights or damaged local profile. "Managed to go to the C drive and locate the photos and docs.  give me an option to connect you with one identifier temporary but everything disappears when I restart. Is there anything I can do or take it to a computer expert.

  Any guidance would be appreciated.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, read the information below:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• Launch firefox automatically windows 8.1 at startup

  How to automatically start firefox windows 8.1 at startup

  Hello

  You could stick your Firefox shortcut on the desktop in %APPDATA%\Microsoft\Windows\Start Menu\Programs\Startup for Firefox starts loading the desktop computer

• Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

  I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

  The last attempt to resume the system from its previous location failed. Attempt to resume again?

  With the 2 following options:

  1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

  2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

  But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

  Please notify.

  Thank you very much!

  Hello

  I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

  Kind regards

  DP - K

• (Dell) Windows 7 Home Prem OA: Please HELP! Windows is loading files.

  To the right,.
  Since my brother was playing around with my computer and play Minecraft, I got a screen that says: "Windows loading files. I tried almost everything, and I'm desperate. I watched a lot of things that still doesn't work. Repeativly F8 at startup, F10, F12 and nothing. The thing is, whenever I have turn the computer back on, there is no commissioning. The screen will appear just by these words: "Windows is loading files," and a white bar at the bottom. I see no symbol start like HP or DELL. I see no screen connection. I tried unplugging and reconnecting TAB, CTR, ALT, DELETE, put highlighted with arrows keys and down and clicking on ENTER. EVERYTHING. He has also been disconnected from the internet for several months and I can't use the disc slot.

  I have also all my photos, songs, videos, work, life and data on this computer. I NEED A WAY TO REPAIR THIS COMPUTER WITHOUT LOSING ALL MY STUFF! Please, please, please help!
  Thank you!

  Since your computer laptop is a Dell, I highly recommend going to Dell Community support.

  It's the HP product HP consumer support forum.

  http://en.community.Dell.com/support-forums/

• SQL Server 2005 unattended install using the script fails on Windows 2003 Cluster

  We strive to perform the installation without SQL Server 2005 via the script assistance, but the installation fails on Windows 2003 Cluster, we use Windows 2008 with HyperV running a DC with two nodes (all Win 2003). Script is...

  Start/wait setup.exe/qb VS = INSTALLVS SQLTEST = SQL_Engine INSTANCENAME = SQL123 ADDLOCAL = SQL_Engine ADDNODE = sqlnode-1, sqlnode-2 GROUP = SQL1 IP = 192.168.1.85, SQLNetwork ADMINPASSWORD = Windows8! SAPWD = Windows8! INSTALLSQLDIR=%ProgramFiles%\Microsoft SQL Server\ INSTALLSQLDATADIR = G:\SQLDATADIR\ SQLACCOUNT = SQLPASSWORD lab\sql_svc = Windows8! AGTACCOUNT = lab\sql_svc = Windows8 AGTPASSWORD! SQLBROWSERACCOUNT = SQLBROWSERPASSWORD = Windows8 lab\sql_svc! SQLCLUSTERGROUP = "lab\sql_grp" AGTCLUSTERGROUP = "lab\sql_grp" FTSCLUSTERGROUP = "lab\sql_grp" ERRORREPORTING = 1 SQMREPORTING = 1 SQLCOLLATION = SQL_Latin1_General_CP1_CI_AS

  Errors on the nodes:

  SQLSetup0008_SQLNODE1_Core (Local)

   Running: InstallSqlAction to the: 4/14/2012 22:56:39

  Installation: sql on target: SQLNODE1

  Waiting for remote setup (s) to prepare

  Remote Setup (s) is ready

  Problem of determining the State of the virtual server for the package: '1' because of the exception of data store:

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 63

  ----------------------------------------------------------

  Could not find the property 'VsDataPath' {'PackageIdStateScope', ' ', '1'} in the cache.

  Source the name of the file: datastore\packageidstatescopecollector.cpp

  Compiler timestamp: Wed Aug 24 13:40:04 2005

  Function name: PackageIdStateScopeCollector::collectProperty

  The source line number: 115

  ----------------------------------------------------------

  dataPathValue is empty

  Cluster functionality detected: SQL_Engine

  Loaded DLL:C:\Program SQL Server\90\Setup Bootstrap\sqlsval.dll Version: 2005.90.1399.0

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: CachedPropertyCollection::findProperty

  The source line number: 130

  ----------------------------------------------------------

  Unable to find property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"} in the cache

  Source the name of the file: datastore\cachedpropertycollection.cpp

  Compiler timestamp: Fri 29 Jul 01:13:49 2005

  Function name: VirtualServerInfo.IPResources

  The source line number: 113

  ----------------------------------------------------------

  Could not collect the property 'IPResources' {"VirtualServerInfo", "", "SQLTEST"}

  Transact package threw an exception.

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  Package first notify: 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\highlyavailablepackage.cpp

  Compiler timestamp: Mon Aug 29 01:18:42 2005

  Function name: sqls::HighlyAvailablePackage:manageVsResources

  The source line number: 490

  ---- Context -----------------------------------------------

  SQLs::HighlyAvailablePackage:preInstall

  SQLs::HighlyAvailablePackage:manageVsResources

  m_dataDirPath is empty

  Cluster API threw an exception during operations of virtualization.

  SQLSetup0008_SQLNODE2_Core (Local)

   

  Local configuration can complement

  Running: InstallSqlAction at: 4/2012/14 23:23:57

  Installation: sql on target: SQLNODE2

  Informs the package is ready to start: 0

  Waiting for notification start installation

  Local configuration can begin installation

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: remotepackageengine\remotepackageinstallersynch.cpp

  Compiler timestamp: Wed Aug 24 13:40:17 2005

  Function name: sqls::RemotePackageInstallerSynch:preInstall

  The source line number: 128

  ---- Context -----------------------------------------------

  SQLs::InstallPackageAction: perform

  SQLs::RemotePackageInstallerSynch:preInstall

  Abandonment of the package: "sql", due to an error from the configuration of the host: 13

  Notify all ready to commit: 13

  Notify all ready to put end to: 13

  Waiting for notification complete installation

  Local configuration can complement

  Packaging return code: 13

  Complete: InstallSqlAction at: 4/2012/14 23:23:59, returned false

  Error: The 'InstallSqlAction' Action failed during execution.  Error during execution information:

  Target collection includes the local machine.

  -----------------------------------------------

  Error: The 'UninstallForRS2000Action' Action failed during execution.  Error during execution information:

  Action: "UninstallForRS2000Action" will be marked as failed due to the following condition:

  The condition 'rs has been correctly upgraded level.' returned false.

  Package installation: 'patchRS2000' failed due to a precondition.

  Running: ReportChainingResults at: 4/2012/14 23:24:1

  Error: Action "ReportChainingResults" threw an exception during execution.

  One or more packages could not be installed. See logs for details of the error. : 13

  Error code: 0x8007000d (13)

  Windows error text: these data are incorrect.

  Source the name of the file: sqlchaining\sqlchainingactions.cpp

  Compiler timestamp: 1 Thu Sep 22:23:05 2005

  Name of the function: sqls::ReportChainingResults: perform

  The source line number: 3097

  Please notify.

  Assani

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  Hope this information helps.

• Can anyone help me to get these security updates 12 windows down load to my computer windows XP system please... ?

  I can't get these updates of windows down load on my computer, they have all failed, can someone help me please? Whenever I try to install these updates directly from the center of update of microsoft all fail.

  Microsoft Windows XP

  Update security for Windows XP (KB2862152)
  Update security for Windows XP (KB2868626)
  Update security for Windows XP (KB2876331)
  A security update cumulative for the stop bits ActiveX for Windows XP (KB2900986)
  Update security for Windows XP (KB2893294)
  Update security for Windows XP (KB2892075)
  Update security for Windows XP (KB2893984)
  Update security for Windows XP (KB2898715)
  Update for Windows XP (KB2904266)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2898785)
  Update security for Windows XP (KB2914368)
  Update security for Windows XP and Windows Server 2003 (KB2917500)

  You don't have to trade your jewelry for this

  http://support.Microsoft.com/kb/942288

  Here are some links to validation

  Download the plugin http://www.Microsoft.com/Genuine/Validate/

  http://www.Microsoft.com/en-us/download/genuine-validation.aspx

  http://www.Microsoft.com/en-us/download/exe-validation.aspx?ID=0

  Call Microsoft technical support to the 1-800-642-7676

  If the COA sticker is missing then you may have a keyfinder product if you need the validation key or if you plan to reinstall the operating system

  http://pcsupport.about.com/od/tipstricks/HT/findxpkey.htm

  http://pcsupport.about.com/od/system-security/FR/Belarc-Advisor-review.htm

  http://pcsupport.about.com/od/productkeysactivation/TP/topkeyfinder.htm

  Go to start > run > wuaucpl.cpl > OK

  Turn on automatic updates > apply (if the setting is changed) > OK

  You can change this later if you wish, but for now, try this setting on .

  Recommend that you run the following patch & reboot

  http://support.Microsoft.com/kb/949104/en-us

  or this difficulty it

  http://support.Microsoft.com/kb/2714434/en-us

• Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP

  Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP.  I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure.  Help?

  Service Pack 2 for 32-bit edition of Microsoft Office 2010 (KB2687455) failed with Windows XP.  I applied microsoft AutoCorrect (Mr. Fix) and 4 registry commands in the article of knowledge, but it is always a failure.  Help?

  Any specific error message?

  Download and install SP2 manually: -.

  http://www.Microsoft.com/en-au/Download/details.aspx?ID=39667 (32 bit)

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=39647 (64-bit)

  If in doubt about whether or not you are running 32-bit or 64-bit, see this topic:

  http://social.msdn.Microsoft.com/forums/Office/en-us/043198a3-e2a0-45b5-85A4-2aa4abb5cc82/how-to-determine-if-user-has-Office-2010-32-bit-vs-64

  If you still have problems, try to update in a clean boot state:

  http://support.Microsoft.com/kb/929135/en-AU (don't forget to return to a normal startup when finished).

  Office updates may fail if the update files, look for the original installation files. Sometimes the complete file download remedies this problem or put the installation media in the installation drive can also help. If still no, you may need to do a repair installation.

• CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  CHKUPD loads at startup. How to find and delete this file?

  Not a matter of Microsoft/Windows.

  http://answers.Microsoft.com/en-us/search/search?searchterm=CHKUPD&CurrentScope.ForumName=Windows&CurrentScope.filter=windows_xp-files&askingquestion=false

• How to stop to load at startup of indexing

  I use Win XP Pro, and I want to stop indexing load at startup in my system tray.  I somehow it started about 2-3 weeks ago and now I want to put an end to its use.

  Thanks for any help.

  If it's the windows index service you can turn it off via the admin tools Control Panel.

   

  If it's a third party indexing service, you may need to disable the program by clicking on the Start button > run > msconfig > Startup tab

   

   

   

  
  --
  db·´¯`·...¸><)))º>

  .

  "JHL1951" wrote in message news: e8e61b15-0624-44 CF-a54d-0e41cf3de646...

  I use Win XP Pro, and I want to stop indexing load at startup in my system tray.  I somehow it started about 2-3 weeks ago and now I want to put an end to its use.

  Thanks for any help.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann