Failure in the print module?

Hello

I have LT 2.5 installed on my Windows Vista computer

In the printmodule, I'm trying to save my file as a JPG file. This is no problem if it is just AN image

If I want to save several photos, the images will be saved as ', jpg "instead of".jpg ".

So to speak one ',' instead of a '. '.

When I have to rename each picture

What's wrong???

Help, please

Enrique

Print to JPEG in the print module, I see as favoring boards contact or multiple images on a single sheet.

Looks like you should be using the library module and choice of export. You can find a few models, and you can do it yourself very easily.

Tags: Photoshop Lightroom

Similar Questions

  • HP6830: Failure of the print queue

    HP replaced my 6830 due to failure of the print head. New printer works proud desktop using Vista. Previuosly I could print from my laptop wireless as well, but it's time the print queue says printing, fails to print and return to errot impression. I know that thw laptop is connected to the printer thr and I even can it ping ipconfig without problem. I have been through software support, and to the low load options hear everything without any result. I am now confused.

    Hi @3391816Sablenip,.

    I read your post and see that the replacement printer is wireless print on the Windows Vista-based computer, but not the laptop running Windows 7. I will definitely do my best to help you.

    If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
    Type the IPv4 address in the address bar of your web browser. (Internet Explorer) It to load the page.

    You mentioned that you can test the printer, just to check a real contact, check the network IPv4 address on the computer to see if the first 3 sets of numbers match the IPv4 of the printer address.

    Press the Windows and R key at the same time, to show the command line run, type cmd, then type Ipconfig.
    Check the IPv4 address.
    Now, check the IPv4 address for the printer.
    If this isn't the case, then the printer and the computer are not on the same network.

    Do the first 3 sets of numbers match?

    Check the address IPv4 of the computer to verify that it matches the IPv4 of the printer address.
    Printers and devices, right click on the printer, on the left, click printer properties, select the Ports tab, click on Configure Port.
    If they do not match and then close the window configure the Port and click on create a port and follow the instructions in the wizard.

    Type the IPv4 address.
    Make sure the printer is online.

    Test the printer. If creating the new port doesn't work, run the Add Printer Wizard.

    If you're still having problems, download and run the print and Scan Doctor, he will diagnose the problem and could solve it automatically.

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    If the problem persists, try the following steps to see if it will be useful. HP printers - print jobs stuck in the print queue (Windows).

    If you appreciate my efforts, please click on the "Thumbs up" button below.

    If you have any questions, please let me know what steps you have taken and the results. Thank you.

  • New feature request: white printing setting the balance in the print Module?

    At the present time, the print Module has adjustments to compensate for the brightness and contrast prints. It would be very useful to also add the White Balance, because usually screens are calibrated to another white point and prints are warmer.

    Thank you

    If everything is calibrated right you shouldn't need the brightness sliders, contrast, or the Balance of whites in the print Module.  They are just hacks.

  • change the margins in the print module

    Since a few days, I work with LR CC on an iMac. I imported several templates in the print module. Now on a landscape A4 page LR used margins (right 1.44 cm and left 0.64 cm) and I can't change them. On all models of mij LR straing margins there. How can I remove the margins?

    To set the margins to 0, you must first open the printer driver settings (inside LR print module) and set the edge mode printer driver.

    LR load minimum border, it shows the driver.

  • Change in the appearance of the print module

    I use Lightroom 6.5 on a Win10 machine (with printer Canon Pixma Pro 9000 MK II, using the XPS driver).  My last use of the print module, instead of painting the exact size and the presentation of the selected paper size displays now a much larger format paper, with the selected paper size, identified by a gray around its borders area.  It's confusing, even if it prints correctly.  Is there a change in the most recent update, or have I accidentally changed a setting?

    Thanks in advance...

    and - if you print a photo-sélectionnez 'unique Image/Board-Contact' in the Style of layout Panel.

  • Why my picture will appear on the screen when I click the print module in Lightroom?

    I have had no problem printing in Lightroom until this weekend.  Now when I select an image in the library module, then click the print module at the top right, I get the general page for the print module with right and left selection committees - but no picture.  Just an empty space with the grid lines, etc.

    A possible problem, is that I figured out how to contact sheets last Friday (which worked fine).  My problem started next time I open Lightroom, then maybe I clicked on something wrong by mistake when I was doing the contact sheet.  I've been through to get to its previous state, but something still does not work.

    Suggestions welcome!

    Thank you

    Kathryn

    For the record, I understand the problem.  When I created a Board-contact, I used "select flagged photos" to indicate the pictures you want to include.  When I went to print single images, I forgot to turn off this feature and return to "selected picture" for printing.  Where the problem.  Now, it seems to work very well!

  • Problem by using the print Module in Lightroom 6

    I use Lightroom 6 on a PC of Windows 8.1.  In the print Module, when I choose layout, a box appears called the Print Setup.  The properties of the binding button shows only the layout and Orientation.  Back in the configuration of printing, paper size, gives only 2 choices - A4 or letter and Source Automatic Watch select only as an optiion.  I watched the tutorials on the print Module and they show a lot more options in these areas.  I'm stuck and all advice would be accepted with gratitude

    Something just cross my mind... Be sure to use a driver downloaded from the printer manufacturer's home page. The drivers supplied with Windows sometimes are universal types that have limited functionality.

  • How to make the print command upward in the print module?

    How do the command pring upward in the print module? It is visible in the form is the printer option, but they do not meet my mouse >

    Could you please do that Lightroom is far, Lightroom 6.3

    Lightroom update: keeping up-to-date for Lightroom

    Also please make sure that you have the correct printer selected on the left side under "Page Setup", and correct the paper size.

  • Default print profile is not known when returning to the print Module

    With the latest Lightroom CC on a Windows 7 with the latest updates, all of a sudden the printer profile in the print job / the color of the right side of the print Module management framework is therefore more pre-filled with the last printer profile I used. It is always empty when I re-enter the print Module.

    Anyone else got this problem?

    I tried to create a new preferences file, but that did not help.

    Tom

    Hi Tom,

    Could you please create a new catalog and a few images to test if t works well in a new catalog of import?

  • How can I let Adobe know that it is not practical to sub - divide a centimeter (in the print module) in 4ths scale?

    ? How can I let Adobe know that it is impossible to divide a centimeter (in the print module) scale in 4ths?

    Trying to divide the 10 mm in the quarter is a bit silly.

    Go here and submit an enhancement request:

    http://feedback.Photoshop.com/photoshop_family/topics

  • In the print module, "print" button is grayed out.

    Since the creation of a book in the book module I am unable to use the print module. It will not show my printer and the only option is 'print to file '. I can't "print" to show key. I have all the updates without change in this State. I called and spoke to Amkaul Adobie and after half an hour, he could not help me and I realized that he knew more than me.

    On the right print job Panel, there is a "Print" option... put to "printer".

  • Why is it not my icc profile in the 'other' tab in the color management tab in the print module?

    I installed a new icc profile (as I did in the past). It appears in the folder c:/windows/system32/spool/drivers/color as well as everything else. I have the latest update for Lightroom installed. I closed Lightroom, restarted the computer and restarted Lightroom. My other profiles are listed, but this one isn't there. I know it must be added in the menu 'Other' down in the profile section of the tab in the print module color management--but it is just not there. Any advice would be appreciated.

    I just figured it out, and I'll put the answer here in case others run into the same issue.

    I closed the print module and went in the develop module. I went soft proofing (shortcut "S") mode and looked on this list of management-profile-other colors, and it was there. I then closed out proofing and returned to the print module. Now the icc profile was listed. Strange behavior, but there you go.

  • My Lr5.7.1 does not recognize my printer Epson XP-760 and after customize printing in the print Module, printing options (lower right AND Main Menu > Archive > print) are disabled

    I am running Lr5.7.1 on an iMac, retina 5K (OS X Yosemite 10.10.1).) My printer (Epson XP-760) works fine with all other applications, but not with Lr! After choosing my printing preferences in the print Module, it works if I select print file and save it to the desktop and then return to preview and print from there. This is not what I want. I expect that the print button (bottom-right) should be disabled and not disabled and send to the printer directly from in the Lr print Module. It doesn't matter if the printer is turned on Wi - Fi or USB (or even both).

    What is the problem? What else can you or should I do to make it work as I hope?

    Gunnar

    My Swedish is not good, but I think that you print on file. Did you try chaning where it says JPEG it changed printer?

    You might also on 5.7. On Lr if you go to the Help\System of information, what is the version number? If she is 5.7, you're not on 5.7.1. Yo can still update manually, go to Adobe - Lightroom: for Macintosh: Adobe Photoshop Lightroom 5.7.1, download the dmg and install.

  • No 'custom size' option in the print module?

    In the print module, I want to create a layout of large format to send to a third-party printer via PDF (16 x 20 in this case). However, in the page setup/paper sizes, no option appears to "manage custom sizes. The only available sizes are limited to my desktop printer settings, which I do not wish to use. Why the 'custom size' does not appear in the paper size list, and how do I create a large PDF format for download?

    If I sent a single image to print rather than an array of pictures on a page, I'd probably just use export as others have said, above. However, in my LR 5.6, if I change the type of output to JPEG, I see an option to customize the dimensions of this JPG output file.  I have to adjust the size of the cell if the virtual page has different dimensions of the physical origin of the selected printer page.  I have a HP LaserJet printer set as my output printer before moving on to the JPG format.  I see this option customize folder size in all three layout Styles: single Image / Contact Board, Picture Package, custom Package.

  • Information overlay not no projection in the print Module

    I have LR 5.3 on a Mac in the Mavericks. The overlay Info in the print Module can not be found with the 'I' key? Where at - it go or what I am doing wrong? I see the news in the library.

    Not to mention that this bug does not with the I key, it does not work with the menu item 'Show the overlay of information' in the display module printing menu.

    There is also an element DOUBLE "grid" in the display module printing menu.  A glitch of cosmetic as both work.

    10.8.5 Lr5.3 OSX

    !

Maybe you are looking for