failure message after replacing the drive #2 0203 IDE

Similar Questions

• Satellite M30-704 slow start and IDE #2 0203 failure message after replace it

  Hello

  two problems:
  first after replacing the cd/dvd drive, my computer does not start now automatically and displays a "IDE #2 0203 failure" message. I can start then it but all of that takes time?

  second problem: until I can access any program, a message will appear: "apdproxy.exe - Application error - the application failed to initialize properly (0xc0000006)" appears twice before so I can continue and then the computer is very slow.

  Can anyone offer solutions? (ps - these two problems are not related that they occurred the month apart).

  Thank you, Gardiner

  (1.) I would say that the BIOS can't handle the new drive correctly because wrong settings master/slave/c-salt but he s strange the player is running.
  I think you should check in the Device Manager, the primary and secondary IDE channels.
  The transfer mode must be on DMA if available and the type of automatic detection device

  2.), it seems the ' apdproxy.exe is a part of the Adobe Photoshop or a similar application.
  This software may cause an error. So just try reinstalling this program

• my hp 5550 printer is not printing from a connection direct mac after replacing the drive hard * bleep * cause of

  my hp 5550 printer is not printing from a connection direct mac after replacing the hard drive due to the recent recall

  So, you have reinstalled the HP software after replacing the hard drive?

  What version of Mac OS X are you using?

• Satellite M30 - error message after replacing the DVD drive

  Virgin, excused my English ;)
  I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
  0203: failure IDE #2
  Is it possible to remove this message?

  Hello

  As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

  In this case, fundamental problem is the pin assignment. It is not the same in all players.

  Good bye

• message after replacing the hard drive is. "This computer is not running genuine Windows.

  The original hard drive has been cloned, but the error occurs 2 - 3 times a day.

  I activated the windows via the phone edition and it said activation sucessvull jet message returns

  I tried to reinstall windows and after loading all software the message windows cannot run on this computer

  The system restarts and uninstall success windows and restores the original defective

  It is a HP PC comes with Windows Vista and was then upgraded to Windows 7. has run like that without problems, then the HD had to be replaced which started this problem

  Keep in mind that a clean install as it will wipe your computer, so if you don't have a backup, make a partition.

• New facility after replacing the drive will not accept Win 7 upgrade key

  I've upgraded from Vista to Win 7 about 18 months ago by using the download service.  Recently my hard drive crashed and another was installed and reinstalled WIn 7 I have the key for Vista and the key for Win 7.  When I enter the key for Win 7 it says it is not valid for this installation because it is not an upgrade.  How can I use my valid and paid for, key?

  Note I already passed the 30 day trial period.

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following the steps below.
  1. start by clicking on the start menu, and then type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4 Select the telephone activation option, call the number given - do not select all options and wait for a person pick up, then explain what happened.

• Reinstalling the software after replacing the drive, ability to access the sites via Firefox gradually shrunk so I can not possibly download a new copy of

  Need to reinstall all the software for non-native Mac (OS 10.9.1) at a MacBookPro 2009 vintage, I had installed Firefox v. 27. As I tried to connect to the web links (which many were not problematic), I started gradually to meet the pages that would never load. Then I got a similar behavior with URL entered manually (only some; gradually more frequent). I had installed some standard modules of privacy, but I uninstalled then them. I tried to reset Firefox without result. I freshly reinstalled (or so I thought) nothing works. I tested the performance against the native Safari and initially had some problems but could access certain websites. At the point where I realized I should do a clean removal of Firefox, I was no longer able to access to any site of Mozilla in any way, except the Help menu on the installed copy and who wouldn't let me download a new copy of v.27. I was able to access a CNet Firefox download page, and he agreed than an interrupted download request but each test (5). I'm hoping to learn a way (may need to be drop the a v. 27 dmg, but hope not) to return to the operation.

  I am also successfully to access the download sites. I think that it is now OK. Thanks a lot for the replies and suggestions. The firewall seems to have been it.

• How can I reinstall the CS6 extended 64-bit after replacing the hard drive and the OS?

  How can I reinstall the CS6 extended 64-bit after replacing the drive hard and Windows 7 64 - bit OS?

  You can download the installer from the trial directly. Find the appropriate link below.

  You must be on a page of trial download to use the links, otherwise, you get an error message.

  For example, to load the next page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

  before you paste the link into the address bar.

  http://trials2.Adobe.com/AdobeProducts/PHSP/13/Win32/Photoshop_13_LS16.7z

  http://trials2.adobe.com/AdobeProducts/PHSP/13/Win32/Photoshop_13_LS16.exe

  You need, to kepp the two files downloaded to the same folder and after downloading, click on the .exe file to extract .7z

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

  I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
  So, how can I put the o/s back on?

  Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
  But I've never tried this procedure and don t know if it will work.

  But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
  After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

• System Restore to factory settings after replacing the hard drive?

  I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

  Thank you

  After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

  You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

  Lenovo - call to order recovery disks:
  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=YaST-3P2QYL

• lost webcam after replacing the hard drive

  After replace hard drive can no longer access/find integrated webcam.  How he connected again?

  Hello

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot access through desktop remote after replacing the hard drive

  After replacing the hard drive, I can't access the computer via desktop remotely.  running Windows 7.  Settings of remote desktop access.  The firewall is disabled.

  Hello

  I appreciate the efforts that you put to publish the query on this forum.

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please do not hesitate to contact us if you have other questions related to Windows.

• Install the operating system after replacing the corrupted hard drive Asus q500a

  The hard drive on my Asus Q500a is bad (he had checked the repairman). They told me that I could replace it (it will just keep failing until at last it dies just) but I have to re - install the operating system. The laptop comes with Windows 7 and I upgraded to 8 when it came out (I think). I don't have a recovery disk.

  How can I replace the corrupted hard drive and re-install the operating system?

  If I need to buy Windows 8, where can I find?

  Would it not easier that I left the repair shop handle it?

  Thank you in advance.

  Hi Kristi,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that the problem with you want to reinstall the operating system after replacing the hard drive corrupted on the system.

  Certainly, I understand your concern and will try my best to help you.

  I suggest you check the suggestions contained in the Microsoft link below and check if this is useful.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/replacing-hard-drive-and-re-installing-Windows-8/e8dbfc81-5294-4c94-9276-0f36e0a66e59

  In addition, you can see the suggestions in the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/reinstall-Windows-8-after-the-operating-sytem-has/30d47e63-296b-4466-ae9d-4628084541dc

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

  Jayant