Failure of a picture Blu - ray disc manufacturing met still CS4

Similar Questions

• Preview works perfectly, Blu Ray disc is not - still Cs5.1

  Hi all

  I never had no problem creating blu ray front discs until one. I have a project created with no error reported when I check it. The chart seems good. The calendar is not crazy long names with spaces. The preview plays PERFECTLY! After burning a blu - ray disc project, I see that in a specific menu buttons do not work even if they are connected to the appropriate time. Also the FirstPlay which is a video short 20 sec will not play.

  Its driving me crazy cause ive never had trouble creating a blu - ray player before. Ive tried to play in three different actors and the same results.

  Am I missing something

  

  

  

  Import formats http://forums.adobe.com/thread/622722 can still help

• Qosmio F750: Toshiba Blu Ray Disc Player does not play videos in 3D

  Hallo,

  I had to re set my PC and installed then drive Blu Ray Disc tosbiha and also Super D and XTune.
  Also also made installation with xtune.

  So now, I'm trying to watch a 3D movie it is not possible to play, the system displays only 2 parallel pictures.
  In the player, Miss me the 3D icon.

  I also installed Caberlink Power DVd V13. But here also no 3D film is projected...

  Does anyone know how to enable 3D in Toshiba Player or how Cyberlink Power DVD to work with this laptop...

  Thank you

  > If I try now to watch a 3D movie, it is not possible to play, the system shows only 2 parallel pictures.
  > In the player, Miss me the 3D icon.

  See this Toshiba document:
  [3D video content not displayed in 3D when you use the disc drive Blu - ray Toshiba on the Qosmio F750 | http://aps2.toshiba-tro.de/kb0/TSB1C038C0000R01.htm]

• My new HighDing SATA burner Blu - ray BD-R/RE Drive burner does not play Blu - ray discs.

  Have a HP Pavilion dv7-1245dx Entertainment Notebook PC running Win 7 Home Premium (64-bit).

  Experienced a DVD/CD drive failure and replaced by a new author HighDing SATA Blu - ray BD-R/RE drive drive.

  The new drive is anything but play Blu - ray discs - would appreciate any comment full of resources available from the community of HP!

  Thank you, Bob

  Hi, Bob:

  Have you installed the required playback blu - ray software?

  If you did, then I don't know why the drive can't read the blue ray discs.

  If you do not, please try this software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99288-1&cc=us&DLC=en&LC=en&OS=4063&product=5093394&sw_lang=

• My optiarc cant BD ROM BC-5500 ATA device read blue ray discs, it can only be read normal CD-ROMs. Please help :(

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Always do a job - even in a first time?  If so, pilots may have been replaced by a Microsoft Update and maybe that's why it doesn't work anymore.  Check the drivers and see if there is an option to restore the drivers to a previous version (which may be supplied with the system when he worked).  If so, try the restore and see if that solves the problem.  Make sure that it not only reads blu ray disks but can read and burn CDs and DVDs as it should.  If not you can always just reinstall the drivers by unscrewing the restore and restore the drivers who were there before you started this effort and again to confirm that it still works except for playing blu ray discs.

  I don't see the point in HP brake a blu ray player that has no driver available for it - I have never actually heard of what happens with a manufacturer or the device installed on the computers they sell.  Someone at HP left dropped the ball big time on this one.  Maybe HP will give you a free exchange to another blu ray player they may have available for your computer making the drivers for it and who actually works like the one bought you is not - it can't hurt to ask.  Check the options first then you can ask to him who is of at least equal quality and is the same price, or maybe a bit more expensive - they can always be arranged because of the problem, they know exists.  I guess that it's still under warranty, so that shouldn't be a problem.  It's an option-, but the decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blu - ray disc player no longer works

  I have a laptop Acer 7720 with blu - ray disc player, but the blu - ray disc player has stopped working!  I tried to open it in windows media center, but get the message "blu - ray play disc not installed program".  Acer will not help as they say it is a software problem and I have to pay for their help in this instance.  any other suggestions of "non-monetary"?  Help, please!

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary. See below.
  
  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Check at Acer for drivers and firmware of your model type and number.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Blu - ray discs say not detected / supported

  How to play blu - ray disc, s keep saying not detected/pick-up of discs

  Windows 7 does not natively read Blu - Ray discs of movies/TV support (if that's what you try to do) - you must use the 3rd party software/codecs. Your PC manufacturer may have delivered a program on your PC, like PowerDVD from Cyberlink, so check. If this isn't the case, you need to buy or download something like the free VLC media player.

  This can also help:

  http://windows.microsoft.com/en-US/windows7/MPEG-and-DVD-video-frequently-asked-questions .

• Yet CS6 hangs at the slideshow built component of generation of Blu - Ray disc/folder

  Still no longer meets the construction of the slide show during the comprehensive construction of Blu Ray disc or folder. Project consists of 96 min video timeline via PrPro Hotlinks and tracks of Japanese & English subtitles, the menu main and 4 submenus (2 Chapter menus, subtitles and slide show). 2 menus are movement w / audio.

  Slide show consists of 147 jpegs. After the failure of the build 2, I reduced all images to 1080 uniform height. No transition, no advance manual, no pan & zoom. Fit to audio duration slideshow 2 active mp3 totalling aprx 7 mins and slide individual durationof 2 sec. Aspect 16:9 the value. The size of the encoded slideshow 58,42 MB.

  Under SP1 Win7 home i7-3610QM x 8 total 16 GB w/NVIDIA Quadro 3000 M gfx mem. No problem before with this configuration for several Blu - Ray and DVD projects. It's the first exit with a slide show component. This project built successfully for workcopy Blu - Ray disc, video editing and subtitles, but without menus or slide show.

  Help!

  Elliott

  Slideshow problems have been resolved by opening in Photoshop and saving. I think it had something to do with stripping to junk in the jpg file. I wasn't sure where you their reduced.

  Yes, reminder, new names always. I create a new slidesho import slides with new names.

  Access denied points to permissions. I would try the option "Run as Administrator"; corrects a variety of weird things. You know how many times Win7 said you (even if you are a user with administrative privileges) that you do not have access and click on continue if you want to grant this permission to yourself... I think still waiting for no man, woman, or operating system.

• How to convert Blu Ray Disc of the movie in general video and HD video formats

  How to convert Blu Ray Disc of the movie in general video and HD video formats

  Hello

  I doubt that this is possible because Bluray discs are mostly protected against copying.
  But if you have the Bluray m2ts file on your HARD drive, then you could try the tool called convertXtodvd. But I don't see that the reasons for this
  I mean that you will lose the quality of film converting the blueray to dvd.

• Encoded video does not work on Toshiba Blu - ray disc player

  I have a problem I'm trying to encode a sequence of images into a video container, but does not work the video encoded on toshiba blu - ray disc player... I use the following command to ffmpeg to encode images and convert a video:

  ffmpeg-i "C:\ManVsWigan\Frames\%d.png" - vcodec libx264 'C:\ManVsWigan\encoded.mp4 '.

  I have tried several video codecs but no luck yet
  "- vcodec mpeg4.
  "- vcodec mpeg2video.

  If you have an idea please help me

  >... I'm trying to encode a sequence of images into a video container
  Please be so kind and try to explain why you need all this?

  I mean Toshiba portable computers offers equipped with pre-installed readers and offer laptop owners to enjoy watching BD movies. Everything else is not interesting for s Toshiba support I guess that if I put t think that this question has something directly with Toshiba.

  Have you tried to find the answer on another forum?

• Qosmio-F750-11U: Blu - ray disc player no longer works

  My Blu - ray player stopped working a few months previously, even if it still plays DVD.

  TEMPro told me that there is a new driver, so I tried to install that:
  Support1. Toshiba-tro.de/Tedd-files2/0/bluraydp-20130117155646.zip

  I unzipped and ran the .exe. InstallShield says ' build Version of the source is not build target.
  that looks more like something the programmers must have correced instead of
  that we poor users could see.

  Has anyone else you have the same problem?
  Preferably with solution ;-)

  TIA & best wishes

  Hello

  The package to install is only an update / patch.
  This package requires the installed Blu - ray TOSHIBA disk drive software.
  TOSHIBA Blu - ray disc player software is installed on your system?

  The exe file is to be found in:
  TOSHIBA\TOSHIBA Blu - ray Disc Player\SMIPlayer.exe

  If its not available or if the version does not match, the installation of the patch fails.

• Where can I download the software of Toshiba Blu - ray disc player to win 8.1?

  Hello

  I installed my Toshiba P70-A-104 completely new with Win 8.1. The company. The software Toshiba Blu-ray disc player isn't anymroe availabe which was available on the original installation of Win 8.

  Anyone know where I can download this software?

  Hello

  I don't know why this utility is not listed on the page of the Toshiba UE driver but I found the reading software Blu - ray Toshiba on the Toshiba driver page Australian Windoiws 8.1:
  http://support.Toshiba-tie.co.jp/windows81/drivers/PSPLP_Up_au.htm

  The software is released for Satellite P70 - A series
  But these utilities are not released for specific cell phone model.

  The only restriction is the availability of the disc Blu - ray (optical disc) drive
  In case your laptop supports the Blu - ray disc player, this software might be installed on your device.

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• Qosmio-F750-10 q: compatibility of DVD/Blu-ray Disc player to help to win 8

  Since the upgrade to Win7 for Win8 the TOSHIBA DVD/Blu-ray Disc player has compatibility problems. When is an update due please?

  Y at - it a update driver also needed to activate the 3D?

  Thank you

  Hello

  I assume you are using the Win 7 Toshiba DVD/BD drive.
  So I t wonder compatibility issues appears.

  Looks like you will have to wait for the release of Win 8.

• Re: Satellite P755 - impossible to play 3D Blu - ray discs

  Hello

  My Satellite P755, Corel WinDVD which is preinstalled inside a. I can't play 3D blu ray discs. 2D works very well. When playing bluray 3d, I can hear all the sounds, but not vision, the screen goes black. I have nvidia 3d glasses, they activate normally; When the blu - ray starts (the sound is coming), but no vision I can get.

  When I open the laptop first, she was fine and worked without a problem but there were windows updates pending. I've updated all, but now I am facing this problem.
  Update could cause this? Or what can I do?

  Thank you Yves for this great tip!