Failure of automatic updated Version

Similar Questions

• My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed.

  My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

• Automatic update of Firefox never find newer versions. Why?

  Hi, I had a problem for a lot of versions now (at least two): set to automatic update never find newer versions. When I first noticed this problem, I noticed also automatic updates are disabled in preferences. The reactivation of them would make them market back after that I checked the updates (on Firefox).

  So I went and:
  -restarted with modules disables
  -updated Firefox
  -trashed active - update.xml and updates.xml

  What's wrong?

  Thank you all. Autoupdater finally works again.

• Thunderbird automatically updated to version 24.6.0. Now, when you start, the program hangs for about 15 seconds before displaying emails, etc..

  Annoying that the default option is automatically update, and makes this automatic upgrade then the program 10 x worse.

  Okay, it looks like that I myself worked it. Thunderbird has been using the system proxy. When I turned off this proxy, the problem disappeared. My guess is that when the new version has been installed, it has redone the way to connect to the internet and inherited the System Proxy settings settings - even if he didn't need to use these proxy for mail settings.

• How can I get version! 6 to V17, while automatic updates won't?

  I just upgraded my macbook with OS x v10.7 (AKA "Lion"). I'm stuck in Firefox v16.02 and want to use a more recent version. I can't understand how to do this. I have the automatic update feature on and he tells me that I am fully updated.

  Hello peterse, firefox 17 is released later today - so for now you are always the most current version with firefox 16.0.2.

• Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?

  Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
  If I need to can replace it where I get an older version?
  Thank you

  Firefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.

  The latest support for your operating system version is 3.6.26 , you are fully updated.

  For more information, see:

  Firefox 3.6 system requirements

  Firefox 10 system requirements

  [For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]

  http://www.floodgap.com/software/tenfourfox/

  http://tenfourfox.blogspot.com/

  https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrat

  I have version 9 (I think) running on windows 10. Works fine EXCEPT when I try to apply automatic updates. It checks, downloads, copies the files and when it is almost by it says it has encountered an error and cancels everything. Frustrating!

  Hi rct_nv ,

  Please provide the exact version of the acrobat application (given that no update available for acrobat 9 as its an older version)

  In addition, I wish to inform that Acrobat 9 is not compatible with Win 10 OS. Refer to this article:- Adobe Acrobat required configuration

  Kind regards

  Christian

• Updated version of the file on publish automatically

  I created a PDF form but I'm trying to figure out I have it is possible to add a footer to the pages that shows the version. Is it possible to have something to automatically update the version of the file, when a new version is released.

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  No, this is not possible.

• ENVY - automatic update failures

  For the last week or plus-automatique updates to apply when stopping. Every morning, they are cancelled. I don't know what are updates, or the place to go to get them.

  Hi MEJ16,

  I did some research on this error code and it seems that some updates Windows will face unless you disable secure startup. This document from HP on the Secure Boot will show you how to disable. Disable startup secure then repeat the update and let me know how it goes.

  Thank you

• Failure of the automatic update

  Automatic update KB978542 cannot install error 0 x 80070005. Provide a solution to the problem please!

  Windows XP Professional Service pACK 3 x 86 SYSTEM 32.

  Thank you

  VIC Luci

  Ask in the appropriate forum.  It is to give your comments upbout the website of answers, not not to ask technical questions. Brian Tillman [MVP-Outlook]

• failure to screen after the installation of automatic update

  A recent update automatic is originally my screen black out about every 30 seconds. If I go back and system restore to an earlier date, it solves the problem. I had to disable automatic updates. has anyone else found this problem?

  Hi ChrissyStowell,

  ·         You receive an error message/code?

  I suggest you to perform a System Restore to the point when the computer was working fine. Install an update at the same time and the update check is at the origin of the conflict. Follow these steps to update windows.

  Step 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2: You can manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• Automatic updates from the update configuration failure; Returns the configuration of previeous... Does anyone else have this problem? It started right after I uninstalled Norton anti-virus.

  I get the auto-mises to day ok; my machine tells me ' don't turn or turn off your computer, install the update 1 of 4' but when I can back up the next day I get the same message except that he says it configures windows updates... then after a while, said "failure to configure updates, return to the preveious configuration & rises."   That is what it is?

  Hello

  ·         You receive error messages?

  ·         This happens with all the updates?

  ·         What are the updates, those who are causing these question?

  Method 1:

  Try running this utility for troubleshooting and check if it works: Open the troubleshooting Windows Update tool http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  Also try to reset the windows update components: How to reset the Windows Update components? http://support.Microsoft.com/kb/971058 (also applies to Windows 7)

  Method2:

  I suggest you put the system to boot and see if the problem still occurs. Follow the steps mentioned in the article mentioned below.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 http://support.Microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  Method3:

  Also, try to follow the steps in the article next, if the above methods do not work:

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7 http://support.Microsoft.com/kb/949358

• App version 32 crashes on an automatic update on some iPads and not others

  Hey guys,.

  Can they relate my iPad app crashes when the automatic update for some iPads and not others? Don't know how to correct the problem. Any ideas?

  When you rebuild your v32 app and when you submitted it to Apple? Apps should be built after September 13. See http://status.adobedps.com/?p=732.

  Also, what do you mean by "Automatic update"?

  Neil

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.