failure of computer on windows 7 64bt update

Similar Questions

• My computer with Windows 7 Home updated for Firefox v34.0.5 but my two computers that are running Windows 7 Pro have not yet updated beyond Firefox v34.0. Something wrong?

  See info above. I re - run the update process at least 10 times on the two machines running Windows 7 Pro (most recently this morning), and whenever the two machines running Windows 7 Pro (one is 64-bit, one is 32-bit) say that Firefox v34.0 is "up-to-date". I checked Mozilla.org, which States that Firefox v34.0.5 was released in mid-December, but he said nothing about whether this update was only for some OSs. I also ran several scans antivirus from different vendors on two machines running Windows 7 Pro and all scans show no problems.

  Please advise is there are different versions of Firefox for Windows 7 family or Professional Edition, or if I'm having a problem. If I'm having a problem, please tell us how I can correct.

  We changed how updates were deployed to a test, that's why you were probably the 34.0.5 on a computer and 34.0.0 on the other. The only difference between them is that 34.0.5 defines yahoo as the default search. You don't need to worry because of the different versions (who both were released at the same time BTW)

• iPod nano doesn't sync computer in windows 10, all updates to iTunes available were carried out.

  Have done all updates for iTunes (latest version), reinstalled the drivers, etc.  Nano Gen 7 will not be synchronized in windows 10.  Must use windows 7 computer to synchronize with the Nano and then use iCloud for around windows 10.  When I try to update the Apple drivers, windows 10 says I have the latest drivers installed and will not do anything else.

  Is the mark with 10 Windows or Apple?  Whatever it is, is there a cure for this problem?

  The iPod appears in iTunes, but does not synchronize?  Or is the problem that you are unable to synchronize because the iPod does not appear in iTunes?

• SP2 is unable to download after failure of computer with windows vista home premium

  My computer crashed and I restarted after the DELL factory settings is a Windows Vista Home Premium but I can't seem to download the SP2 so that I can get IE9. I have SP1, but when I try to download the SP2 it tells me to get SP1.

  Please do not mark a reply as the answer unless it responds to your question.

  It is what is in my previous answer to check what level of Service Pack you have installed.

  «Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64 bit installed.»

  It will also tell you which SP you have installed. »

  What does it there?

• Failure of the b Windows Vista 64 update: (code 80050007)

  Update windows 64B is now impossible because I see an 80050007 error code. I tried to work on my admin account, but even who could not fix this update. On the internet, I've seen a lot of questions unanswerd (UAC) for a problem like this.
  I even cleaned my system with tune up en microsoft fix the (problems of sound and WV64 updated search), but even that does not work.

  Another problem maybe caused by the present is: there is no sound on the PC.

  who knows the answer?

  Please repost to section updates from Windows:
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  While you wait for the equipment he answer you, take care to check in these tutorials for programming...

  1. how to reset Windows Update Componeants
  http://support.Microsoft.com/kb/971058

  2. system analysis tool:
  http://support.Microsoft.com/kb/947821

  3. how to solve problems
  http://support.Microsoft.com/kb/2438651/en-us

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  I have windows 8 in my computer toshiba laptop. After you set up windows for the updates it says «restoration of the changes...» Impossible to install the important updates'... What do I do?

  Hello

  Please, try the suggestions mentioned here and see if they help you:

  http://www.thewindowsclub.com/failure-configuring-Windows-updates

  Hope this helps, good luck :)

• Restart your computer to finish installing important updates keep appearing. Windows Update (Windows 7)

  Previously I installed updates for windows 7, after installing the updates, I restart my computer but it still seems the message to restart your computer to finish installing important updates. Help solve this problem...

  Original title: Windows Update (Windows 7)

  Hello

  Step 1: Determine if the update has been installed

  Review the installation history

  a. to review the installation history, follow these steps:

  b. Click Start, point to all programs and then click Windows Update or Microsoft Update.

  c. on the Web site, click on view update history.

  d. find the latest entry for the specific update.

  (e) Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

  Step 2: Run the Windows update utility for troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

  I want to erase the hard drive and use it to install windows xp.

  From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

  Does not help, but could help to point you in the right direction...

• Computer crashes every time I try to install a windows recommended an update, (KB972813) language packs

  Just installed Windows 7 Ultimate 64 - bit version. I have already installed all the updates without problem, but when I try to install one of the recommended update language packs my computer hangs during the update "facility" progress bar gets about 90% full. I never get an error screen, the computer just hangs, even the mouse becomes unresponsive. I waited for hours in the hope, it was just temporary, but I ended up having to reset the computer. He told me he could not update and restores the changes when it starts. This happens whenever I try to install a language pack.

  Hello

  I suggest that you follow the steps below and check if the problem persists.

  Step 1:

  a. click on Start

  b. open the Control Panel from the menu display by (up/right) select one of the views of the icon .

  c. click Troubleshooting. On the bottom of the screen, under system and security , select fix problems with the Windows Update troubleshooting tool . Follow the instructions.

  You can also check the information in the following article.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Step 2:

  If that does not solve the problem, start your computer in a clean boot State and install the update to KB972813 . There could be a software program of third party in conflict with the update. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to restart your computer after you install the update in a clean boot state as usual.
  

  Let us know the results.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• When an update has been made to my computer through windows, I have now lost my names in my contact list. Please reverse, or tell me how to recover.

  When you make updates of my programs, I lost all the names in my contact list.  Please this that never reverse so I'll beable to recover names.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Cannot successfully comQosants my computer with Windows updates. I have tried disabling Norton anti-virus and firewall.

  Jim Eckland

  Jim,
  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New computer with Windows 7, stuck on the specific update

  Hello world!
  I have recently (last Saturday) purchased a new HP laptop with Windows 7 installed. The computer is now going through the standard (I guess they are standard) updates for Windows and successfully completed several rounds of them. Last night after having turned it off the computer began another series of updates, with 14 in the total bundle. She started 1 of 14 around 20:00 and started 4 of 14 at 22:30. From 08:30 the next morning, he was still on 4 of 14.
  Is this an update that takes 12 hours to install, or is there another problem causing my computer to not to go beyond the update? I found no way to bypass the update or cancel it.

  Thank you!

  Hi Kristi,

  Are you able to boot to the desktop now?

  Let us check that the windows update history for the error code.
  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
  3. in the status column of this window, find the update failed to install, and then click the red X.
  A new window opens that displays the installation error code.
  4 write down the error number and post it back.

  Until you can, let us perform startup repair that may help you resolve the issue.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Follow the instructions in the link below to perform the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  You can check the link below:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I updated my computer to windows 7 and now I'm having problems with my dns, I can't always on; the line. tells me having a problem with my dns server

  updated my computer to windows 7 and now can not conect with the dns can not get online always

  Upgrade to Win7 has nothing to do with Windows Update.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet or post in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Explorer security updates of these last years I stay on my computer or do I have to uninstall and just keep the most recent one?

  I have all these Explorer Windows and security updates from the years on my computer... They are stuffing it upwards and it slows down by too much space?  Can I uninstall one of them if they want to free up space and speed up my computer... I am a senior and don't understand a whole lot of these things.  I have Windows XP

  Is it safe to delete the folders $ $NtUninstallKBxxxxxx
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/do-all-the-Windows-Explorer-security-updates-from/ee7c2c54-8101-48bc-99de-6f14dc7ef5eb

  Low disk space - how to free up disk space on your laptop or PC
  http://www.PAGESTART.com/lowdiskspace01.html

  J W Stuart: http://www.pagestart.com