Failure of logon user interface after windows update

After a recent windows update I get the following error.

Winlogon.exe: The application or DLL c:\WINDOWS\system32\OBDC32.dll is not a valid windows image. Please check this against your installation diskette.

After this window I get:

User interface failure: could not load the DLL msgina.dll of logon user interface. Contact your system administrator to replace the DLL or restore the original DLL.

The only option at this point is to restart that puts me in a vicious circle of the same mistake.

I tried to login in safe mode by following the instructions in this article , but the same error messages.

I use VMWare Fusion 2.0.8 and on OS X 10.5.8.

Someone at - he had this problem and found a fix?

Thank you!

You will probably need to run a repair of Windows, the installation looks beat some key Windows components.

KB.VMware.com/kb/1013846

Tags: VMware

Similar Questions

  • Error message: "logon user interface host windows stopped working. & configuration of updates fail

    Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

    For your information, I use windows 8. so help me solve this problem. TQ

    Hi ZakwanSalleh,

    Thank you for choosing Windows 8 and join us on our community.

    From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

    We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

    Method 1:

    I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

    Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

    http://support.Microsoft.com/kb/929135

    Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

    Method 2:

    I also suggest you to run a sfcscan and check.

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

    Follow these steps to run sfcscan.

    a. press Windows + X keys and click / tap on (Admin) command prompt.

    b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

    NOTE: It can take some time to finish the race.

    For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

    http://support.Microsoft.com/kb/949358#method3

    It will be useful. For other related issues in Windows area it always welcome in our community.

  • Get the message: it is not possible to load the user profile after Windows updates

    Original title: Windows won't let me sign after updates

    Last night when I turned off my computer I saw that he had a few updates to do let him - now it won't let me login and when I try to it says that it is not possible to load the user's profile (it's the only one)...

    Recently, I installed Office and Windows 7. My anti-virus is the one that is provided by microsoft. Help!

    Hi romanista,.

    You can read the following article and check if it helps to solve the problem:

    Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

    http://support.Microsoft.com/kb/947215

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error message: "logon user interface host windows stopped working.

    Several days ago I started having the application error "windows logon UI host has stopped working".  It happens when I log on, as well as when I open the Task Manager.  I followed all the recommendations I found online (restoration of the system, sfc/scannow, check disk, clean boot), each several times.  Kaspersky Anti-virus is also updated.  How can I stop this error?  It causes browser crashes and slows things down.

    Hello

    This can happen if the computer is out of memory. Perform a clean boot and remove unnecessary programs.

    Check out the link and follow the steps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

  • The logon User Interface DLL Masgina.dll failed to load?

    Hello

    My name is Shelley, I really honestly do nothing about computers and my computer at home, which is a dell with windows xp pro.   was working fine, then 1 morning I rose and ithad a blue screen with the message about it.

    The logon User Interface DLL msgina.dll failed to load.  Contact your system administrator to replace the DLL or restore the original DLL.         then she had a reset button to push.  When I pressed the button, the display cover Dell and then he showed the sreen of coverage of Microsoft Windows XP, then he can go right the message telling me that. The User Interface DLL failed.

    Now, my computer has been sitting there for 2 weeks, and no one can use it.  Now, I'm on my cell phone the school for 17 years.

    What should I take my computer in a store or is - something simple, maybe, I can do myself?

    OH and if you know, the computer is at my daughters school, they have gave to her, because she had really great classes and she's in schools IB program, so they gave him a computer to have at home, it is set up for academic use, I know not whether that counts or not.  She got a new laptop for Christmas. Other people in the House are now using the computer to play games and watch videos from YouTube.

    Can someone help me?   Thank you, Shelley

    Hello

    ·        You're able to boot in safe mode?

    ·        Remember to make changes to the system?

    Method 1:

    If you are able to boot into safe mode then I suggest to do a system restore to a previous point when the system worked very well and check.

    Step 1:

    I suggest to start in safe mode and check if the problem persists.

    a. restart the system and keep tapping F8 until you reach the start menu.

    b. Select safe mode from the list and press ENTER.

    Step 2:

    I suggest you do a system restore and check. Follow the steps mentioned in the article below.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    I suggest you to consult the article below.

    "Logon user DLL Msgina.dll failed to load Interface" error after you have installed the MS04-003 security update

    http://support.Microsoft.com/kb/836683

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "was my initial problem.

    "The logon user interface DLL failed to load athgina.dll. Contact your system administrator to replace the DLL or restore the original DLL. "It's my original problem due to uninstallation of a Netgear usb internet device programthen a friend got their hands on it: now, put on it goes to safe mode selection screen. the result options of safe in many hyper scrolling mode that reads - multi (o) disc (o) partition (1) windowssystem32drivers\ ___sys... then stops & starts up etc when in last known good config that worked or start normally the icons of windows screen is displayed every thing seems as it should, then it turns a shade of blue just 1/2 a screen of white lettering & bam his judgment in a Flash. Cannot read this fast.      XP sp3 Toshiba Satellite P305

    Hi chygirl,

    You can follow the solution at the bottom of the link:-
    http://www.GeeksToGo.com/forum/topic/270656-cant-boot-up-after-unistall/
  • Speech recognition does not match the language of the User Interface in Windows 8.1

    How can I update my speech reconition language that matches my user interface language? Thank you

    Hello

    Thanks for posting your question on the Microsoft Community.

    I apologize for the inconvenience caused to you.

    I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

    This issue would have occurred due to some damaged system registry entries.

    Please provide me with the following information to better understand the issue.

    1. What language is speech recognition uses in the system?

    2. What is the base language that is installed in the system?

    Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

    You can also check out the link below.

    How to use speech recognition

    http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

    Please provide the information above to help you best.

    Thank you.

  • Unable to start - blue screen after Windows update

    original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

    Can not even go in safe mode

    Hello

    try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    If you can make the above change how you receive updates to find the update problem

    When right-clicking on it UAC prompt you hide it

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Choose one of these settings:

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  • After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

    * Original title: System Restore

    Windows 7 Home Premium

    Dell XPS L502X

    Intel Core i7-2670QM CPU @ 2.20 GHz

    8 GB RAM

    After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

    Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

    Thank you

    Joe

    Hello

    This can help you:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    AVG will cause problems with SR too.

    «Temporarily disable AVG»

    http://www.Avg.com/ww-en/FAQ.Num-3857

    2. try to use Safe Mode system restore.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

    "Start your computer in safe mode.

    http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    ____________________________________________

    And some information for you about Windows updates:

    Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

    You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

    But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

    You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

    'Remove an update - Windows 7'

    http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

    When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

    "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

    _____________________________________________

    Here's how to chanage update settings, if you think it is necessary to:

    "Understanding Windows Update and Extras in Windows Vista and Windows 7.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

    Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

    See you soon.

  • No Internet after windows updated August 18.

    No Internet after windows updated on August 18, to return from vacation.

    System Restore to 8 August which worked yesterday and restored internet, but when you sign in today update windows automatically installed and once again no internet no access. Computer won't let me restore of the system now well I tried different dates - said the system restore could not replace the file (c: Windows) with the original copy of the restore point - an unspecified error has occurred in 0x80071a90.  Still no internet access.  Any ideas please?

    The KB2705219 update could be the cause and uninstall that solved the problem for some users.

    But...

    In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

    Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

    While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

    I have McAfee, but the connection has started working again on its own so I thought I was clear of problems.  However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually.  So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated.  Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].  My home network has survived without any new replacement set - firewall Windows just took the right settings without any complaint.

    I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  • Good question after Windows update on Satellite P100 PSPA3E

    I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

    I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

    Thank you

    JD

    Hello

    What operating system do you use? XP or Vista?

    Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

    I recommend to remove the sound card in Device Manager after installing Windows updates.
    Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

    First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
    Please don t forget to restart the laptop after windows update finished.

    Best regrads

  • Satellite L500 - system hung on the splash screen after Windows update

    Hello

    I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

    Thank you
    Denise

    Hello

    > hung on the blue startup screen after it has restarted after a windows update
    This means that you get a blue screen after Windows update and more, you can start Windows t?

    You can start Windows in safe mode?

  • Laptop Presario CG56: CG56 crashed after Windows Update

    After Windows update, set during the race, woke to find a "scree Orange" with the logo of Compaq.  Press F11 to enter in recovery mode has organized the restoration of the system for each restore point.  Finished with 0x8000ffff.  A ran the recovery system completely at the end.  Finished with the Orange screen.  Minimized ran impage recovery all the way to the end.  Repeat screen Orange.

    I find that the BIOS is corrupted in Windows Update, somehow.  I can get to the line of command in recovery mode, but I don't know what to do.

    Help!

    Me am HP Advanced System Diagnostics V3.0.3.0 by pressing f2 until the screen has finally come.  Do you have the System Diagnostics.

    Have you hard reboot by removing the battery, press the button for 15 seconds, extra power, hit start and the start up like a new PC was started and Windows.

  • "limited connectivity" on after windows update wireless router.

    Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

    I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

    Hello
     
    What operating system do you use?
     
     
    Method 1:
    Check the update has been installed and make a note of this update.
    To check, follow these steps:
    a. Click Start, in the search box, type in update
    b. click on windows Update
    c. click view update history
    Note: If this isn't a significant update, you can hide the update.
    To hide an update, follow these steps:
    a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
    b. do one of the following:
    o click the link that tells you important updates are available if you have some updates to hide.
    o click the link that tells you optional updates are available if you have optional updates to hide.
    c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
    d. click OK.

    If it an important update then you can try the following method 2:

    Method 2:
    Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
    Clean boot: here is the link:
    http://support.Microsoft.com/kb/929135
     
    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  • slow after windows update

    Hello
    After windows update:
    my PC slowing significantly
    Windows search sometimes opens spontaneously
    pages (explorer) sometimes becomes white and the icons disappear and takes a long time to be closed
     
    I have ms security essential and it is updated, so I do not think that my system is infected.
    Thank you.

    MajidNavabi,

    • See the following topics

    http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us >

    http://support.Microsoft.com/FixIt/ >

    06/28 / 1106:37: 19 am

Maybe you are looking for