failure of migration on wifi. error message. programs do not work. anyone else having the same problems?
failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.
Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.
Tags: Mac
Similar Questions
-
Hello on the program is not working properly, please return the money to buy other best program and thank you
A faulty program that has not been purchased Mali returned from four days
-
what I did to my computer?
what I did to my computer that makes my wifi cutting continuessly and I bought an optus modem and im having the same problems can anyone help?
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135
NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
Method 2:
Try to update the latest drivers for the network adapter and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
It will be useful.
-
I have the latest update of El captain and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?
I also got an iMac mid 2015 27 "retina and not have problems. But I have another option 'see the add screen pictures"deselected it's the ravages of a single reading. See screenshot of my graphics card.
-
Original title: error message:
When I try to open one of my programs, I get an error message states that my program has stopped working, Windows is looking for a solution
Hi SheilaFrenchman,
· Are what program you referring?
· Did you do changes on the computer before the show?
· What is the full error message?
Follow these steps:
Step 1: Start the computer in safe mode and check if the problem persists.
Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
-
I get this error message everytime I turn on my computer. I know how to uninstall it, but do not know how to re - run the installer. I want to do without risk if losing important files.
Hi L4linda,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum of TechNet SQL server.
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
-
When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "
I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!
Should I re - publish so that else soeone looks like?
If you wish.
Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.Alternatively, you wait for the next person coming.
The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Problems with eBay error messages and do not know how to set the script on xp pro
. Download erroris 'tables' not defined
Hello
1. what internet browser do you use?
2. could you give us the exact error message?Refer to the procedure described in the article below and check if it helps us to solve the issue.
How to resolve script errors in Internet Explorer on Windows computers
http://support.Microsoft.com/kb/308260I hope this helps.
-
Message is "file not found", but I can open them in Bridge
This is a discussion on this: Photoshop CS6: file not found when trying to open JPEGs (old plug-ins installed)
-
"error rundll32" dougknox does not work, no cd of the os
dougknox does not work, no just upset os cd
Hello- When you receive this error message?
- What were the changes made before the problem occurred?
- You use a program that is causing the error?
I suggest that you follow these methods and see if the problem still occurs.Method 1:
Perform the check and the boot if the problem persists.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-usNote: Follow the steps in the article to restart your computer as usual.Method 2:
Perform SFC scan and check if the problem is related to a corrupted system file.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747 -
I have Compaq CQ5210F PC running 64 bit Windows 7 restricted. I can't run any of my 32-bit programs. Y at - it a fix for this?
Thanx
Hello
Review Windows 7 Virtual PC and XP mode. If your programs are intensive video, you should examine the upgrades of the program and run natively under Windows 7.
-
I tried to install the new version of Messenger. Whenever it 100% then automatically installs "cancelled" and gives me the message above.
I uninstalled the remnants of the program and turned off the firewall.
I found a thread on this forum with a way to get to a form of contact email support, but I can't access it, just end up going round and round in help.live.com
Help
Discussions in Windows Live Messenger
They will help you with your WLM questions when repost you your questions in the highest Windows Live Messenger Newsgroup.
See you soon.
Mick Murphy - Microsoft partner
-
my computer is showing this message and custom allow Internet: Windows could not connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As an administrator (which I don't have) you can view the system event log to see why the service did not respond, can anyone help? Please
original title: can't get on the internetHello
Try the steps in the following article:
"How to determine and recover Winsock2 corrupted in Windows Server 2003, Windows XP and Windows Vista":
-
Activation.
My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server
How to activate Windows XP
http://support.Microsoft.com/kb/307890/en-usSee the section titled: "how to activate Windows XP by phone.
Also, make sure that you do not confuse the product key numbers and letters
(number 8 for the letter B, etc.)How to contact a Microsoft Product Activation Center:
http://support.Microsoft.com/default.aspx/KB/950929/en=usMicrosoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxOnce Windows activated / Genuine Advantage Notifications:
http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
(This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)J W Stuart: Http://www.pagestart.com
-
Photo editing program does not work when you change the color and brightness.
I'm trying to change my photos. When I try to make the picture turns into a bunch of dashes and spaces. I believe that the photo program is corrupted. It crashed the PC and reload the OS X El Capitan.
With the amount of information you provided that it is impossible to offer a solution. We cannot see your computer so we need to know the details of your problem and the configuration, i.e.:
- What system do you use?
- What version of iPhoto do you run?
- where is your library? If it's on an external HD how this drive is formatted and connected to your Mac?
- did you apply the updates or upgrades just before the problem occurs?
- you run a library "managed" or "referenced"?
- How much free space on your startup disk?
- What difficulties have tried?
Download and run Etrecheck. Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.
Maybe you are looking for
-
I put this rom on my phone and my tablet. Great Firefox œuvres, but cannot find anywhere to open a menu to change any settings. Any help would be greatly appreciated. I have not had any problems on any other roms Terry
-
Satellite U500 - 18L - can not update display driver
I have a Satellite U500 - 18L running Windows 7 HP 64 - bit, which has a NVIDIA GeForce G210M GPU inside.The problem is that I can't install the latest 64-bit drivers for Win 7 for laptops from NVIDIA.I get an error message saying that no driver was
-
I have a disc stuck in my PC and no pin hole to eject what and how do I get to eject
I put a cd in and I can't eject
-
Free update of the Original system from Windows XP to Windows 7 operating
I use an original version of Windows Xp and I have 1 GB of Ram and 1.8 GHz Pentium 4 processor, now is it possible to upgrade my computer to windows 7 for free? If Yes! How it should be done?
-
Apple Tv and E3000 and BEFSR81
OK, if you are looking for someone to help me with this problem I have. So I got a new wireless router the E3000 hooked up to my cable BEFSR81 router and I also have an apple TV connected to my local network. Now before I be the E3000 from each compu