Failure of SATA 1 TB hard drive 7200 RPM

Similar Questions

• Satellite A210-128: I want to change the 320 GB HARD drive 7200 RPM

  Hallo all

  Can someoane help me with this little problem?
  I have a portable satellite A210-128 with a hard drive of 250 G 4200 RPM (* slowest *)... I want to change the hard drive with a hdd 2.5 "Western Digital 320 G 7200 RPM (* speed *).

  Question:
  1. If I buy a disk sata2 hard can I put on my laptop because my A210-128 has a disk sata hard?

  2 can I I install vista on this new hard drive on my vista dvd, im asking this because I want to be shor that my recovery dvd * RECOGNIZES THE NEW HARD drive * and I can install a new copy of windows or installing dvd can * only works with disk drives hard toshiba *... ???

  Thank you.

  As to the question;

  (1) I think a SATA2 HARD drive would go because the standard SATA2 is compatible to the bottom. But I assume that the system will operate as a good HDD SATA.

  (2) Yes, you can install vista using the Toshiba Recovery DVD. It shouldn't be a problem with a fresh install

  Good bye

• HP pavilion 2006sq g6: 1 TB Hard drive 7200 RPM for g6 2006sq pavilion

  Hello

  I am planing to buy a new hard drive for my laptop because my current is on alert

  I found this one:

  HGST Travelstar 7 K 1000 1 TB, SATA-III, 7200 RPM, cache 32 MB, 9.5 mm

  http://www.Newegg.com/product/product.aspx?item=9SIA2W02KN0922

  and wanted to know if I can use since I read the manual of the laptop, and it indicates that it supports only 5400 RPM hard drives 1 to?

  Any 1 to 7200 RPM hard drive will work with my model?

  Thank you!

  ALex

  Hello

  Thought the same thing so I decided to take a decision on a viable alternative
  WD7500BPKX
  I install windows 10 on that as we speak.

  Thanks again for the clarification!

• Info for: mSATA SSD 80 GB and 750 GB hard drive (7200 RPM)

  I buy the 14-2160SE Envy Beats Edition and it has a double drive; SSD HARD DRIVE &. I can't find any definitive info on the HP site or on the web. I am familiar with both types of readers, but not both on the same computer. How does it work? What is the purpose? If it switches automatically or pass them? And, especially, it works for the intended use? Although this is my first post, I'm a believer in public forums, so I don't know that I'll be back as soon as I got my desire. Thanks in advance for your help. Sam

  The 80 GB SSD can contain the operating system and the 750 GB hard drive will be for storage. SSDS are very (very) fast but expensive, so you can get the speed without the monstrous price advantage by combining a little cheaper SSD with a hard drive for storage. I have a 500 GB SSD and it costs more than $600, but I thought I got a good deal. My laptop takes only a single drive. You have the advantage of being able to use the same laptop 2.

  Readers will appear as readers symbolized under "Computer" (Windows Explorer). The SSD will be "C:\ >. Just be sure to move the "My Documents" folder to drive hard (if this has not already been done). Also when you install a new program and it asks the path where you want to install it, put it on the hard drive. In this way, you keep the SSD of McNeil. 80 GB will be plenty as long as you don't try to store large media files.

  http://www.SevenForums.com/customization/17917-change-location-my-documents.html

• I have a question 640 GB Serial ATA Hard Drive (7200 RPM) / min with DataBurst Cache?

  Hello I am new on this forum,

  I just bought the Dell Inspiron Intel core 2 quad and I checked the info of the hard drive and it says that I have available 564 GB and 30 GB was used only as! Dell installed the wrong hard drive because I had to get the 640GO? Or am I missing something?

  Steve

  
  

• HD1600s HP personal media external hard drive 7200 RPM 160 GB

  Bought a new computer and my HP disc HP1600 external hard is not supported with Windows 7 OS.  Am I bad about it and if not how can I get all my files backed up off this drive external hard now?

  Hello

  According to the information of requirement system of HP, the device is compatible with windows XP.

  You can check: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00189065&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&product=424311#N144

  However, as a work around, you can install drivers for windows 7 with compatibility option.

  See the link for how to install the drivers below:

  Make older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  You can download the drivers from the link below: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=424311&

• Satellite A100-727: HARD disk 7200 RPM replacing

  I am disappointed by the performance of the hard drive 5400 RPM in my Satellite a100-727.
  It's a Serial ATA-150 record. Can I replace it with a Seagate momentus 7200 RPM disk SATA-150?

  Hello

  I put t see why you should t be able to install a 7200 RPM SATA HDD for serious reasons.
  The higher speed rotation shouldn't have a bad influence on the use of the laptop

  Best regards

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• Wil Windows does not recognize a SATA Hitachi Travelstar HARD drive

  Drive HARD Hitachi Travelstar SATA will not be recognized by Windows Vista.  What can I do?

  WINDOWS VISTA (64-bit)
  I have updated all drivers and updates on the site.

  BIOS SATA value "compatibility."

  I now have the following devices in Device Manager:
  -IDE ATA/ATAPI controllers
  -ATA Channel 0
  -ATA Channel 0
  -ATA Channel 1
  -ATA Channel 1
  -Intel(r) ICH9M/M-E 2 port Serial ATA Storage Controller 1-2928
  -Intel(r) ICH9M/M-E 2 port Serial ATA Storage Controller 2 - 292D
  -Ricoh Memory Stick Controller
  -RicohSD/MMC Host Controller
  -Ricoh xD-Picture Card Controller

  UBUNTU 10.04 LTS (32 bit)
  When asked if I had plugged into another computer with an eSATA port, I
  thought about running another operating system would be equal to another computer
  with these results (see screenshot).

  BIOS SATA value "compatibility."

  eSATA connection recognized under ubuntu using port ICH9M/M-E 2
  IDE SATA controller on the same host PATA as CD player adapter
  as seen in Ubuntuscreen shot.

  Page saved to connected eSATA hard drive Hitachi.

  Go to the web site of the manufacturer of the computer and see if they have downloads of BIOS update available for your system and your version of Vista.  If so, download and install it and see if that makes a difference - the update may allow recognition to the (if the BIOS is the problem).  Are you certain that you have done all the necessary BIOS changes and that your choice is right for your situation - check this after update if you need to don't do only once.

  Are you absolutely sure that the drive is compatible with the system and your version of Vista and you have installed the drivers of proer? You have a SATA drive it before or is this the first SATA drive on this computer?

  Remove the disc, remove and replace all connections to ensure they are secured (at both ends) and check it out again.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SATA 3 Upgrade hard drive

  Problems with my hard drive so I'm upgrading to a larger device SATA 3. Just thought I would check with Dell to see if the motherboard supports SATA 3 or if it would simply be it throttle back so that it acts as a SATA 2 device.

  Unfortunately, I had the answer "it won't work".  When I pressed them on whether if it meant it would not work in mode SATA 3, after many expectations while the technician looked at offline, the best I could get was that the motherboard isn't compatible SATA 3... and it would not work.

  I must admit that I do not understand this kind of response. Anywhere else I looked on the Internet it says that everything is interchangeable, and if the motherboard does not support native SATA 3 then the HARD drive works in SATA 2 (slowest mode)

  Dell correct and everything everyone else wrong, or is this another case of I need to get my hands on more technically competent assistance?

  Or worse yet is this another exclusive DELL problem.

  Jettgod

  Hi Jettgod,

  Dell Studio XPS 435MT comes with chipset based Intel X 58 motherboard and SATA support in operations, in SATA II mode. A hard drive SATA III is backward compatible and works on your system, however, it will give you speeds of SATA II only.

  For more information on the Intel X 58 chipset, you can check for a link: http://intel.ly/11l1Tbp

  I hope this helps. Do not respond if you have any other questions.

• Failure to make an external HARD drive... Why?

  I took an old SATA hard drive and installed in an external enclosure.

  The accommodation has all the fittings supply, a USB 2.0 port and an e-SATA port.

  I want to format the drive it connected to a USB port of spare on my desk. The PC recognizes a device has been plugged in, driver loaded, but I can't access the device at all.

  In Control Panel / devices and printers, he appears as a "USB to Serial bridge - ATA" and I can access its properties. I want to use it as an external storage,

  HOW CAN I DO THIS? Help! PLEASE, I BEG YOU!

  So that shows disk management?

• Re: Portege R830 eSATA - failure to mount the external hard drive

  {color: #000000} I have a new Portege R830 with combined eSATA / USB port. It will recognize an external drive in as drive 0 Device Manager but does not mount the drive under Win 7 x 64. The road rises and works absolutely normally under USB2 via the combined port or one of the other ports on the PC. The player works absolutely normally under eSATA on another desktop PC Win 7 x 64

  Search Internet suggests that this is a widespread problem with Win 7, but given the above commentary to normal operation on my desk, strongly indicates that it is "simply" a laptop Toshiba driver problem Win 7 x 64.

  A workaround solution that someone had reported was to boot the PC with the drive connected. This will lead to the PC mount the drive, but I found to be unreliable - tends to freeze the unpredictable machine, but when logged in it showed he was transferring data at a reasonable speed.

  The search for these forums, no solution has not identified... Toshiba - think you should answer it please!

  Afetr all is a 'feature' significant on the Portege and rather defeats the point if it is impossible to use...

  Kind regards

  Kevin {color}

  Hi mate

  First of all, it is a forum for a user to this don t address issues from Toshiba here in the forum, but other users of this community.

  Back to your question; Does this mean that the HARD drive connected to the eSATA port cannot be recognized as device eSATA but USB device?

  Please check if you are using the latest version of the BIOS. On the European driver Toshiba page, you can find the BIOS version transferred to 29/07/11.
  In addition, I recommend to check the BIOS settings; check if eSATA is activated it.

• laptop Compaq CQ58: id of failure to the dst short hard drive RGF0R0

  my notebook Compaq CQ58 3 year, husbands, froze and wouldn't respond, after a few hours I force it down by pressing the power button, when I tried to start it up again once he went int automaticic repair, it took more than 24 hours.

  but the computer continues to freeze and go into the auto repair each time and was unusable.

  I don't have a recovery disk, none came with the computer and stupidley has not created a when the computer was new. being the only other computer that I have a windows vista I could not create one on this machine.

  As their was anything important stored on the computer I decided to reset the computer hoping that would solve the problem.

  I followed the instructions and the computer seems to be going through the motions to reinstall when he got stuck in a loop of

  the HP points logo swirling

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  back to points logo and swirling HP

  a popup with the date and time and please wait

  a white screen with the top of the window cmd at the bottom left of the screen

  After 48 hours I force crashed computer

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Fiona-s wrote:
  
  

  I ran the race test that everything happened except the short DST hard drive

  Falure ID: RGF0R0 - 69781:-MFKT1F-60WU03

  This means that the hard drive needs to be replaced and if so should I also a recovery disc, the laptop is out of warranty

  Thanks in advance for any help

  Hello Fiona-s,

  Thanks for posting in the Forum of Support HP!

  I'm afraid that the HARD drive has failed - the question is material one and all simply restore/reinstall will not solve it. Yes, you need to replace the HARD disk new or better with the SSD. SSDS are up to 10 times faster than hard drives:

  > http://ocz.com/consumer/ssd-guide/ssd-vs-hdd

  > https://en.wikipedia.org/wiki/Solid-state_drive

  There are more than 100 manufacturers and sellers SSD, but personally, I would choose Samsung, Intel, Toshiba, or OCZ ones.

  Microsoft Windows 7, 8.1, and 10 have supported for SSDS. Vista and XP - no

  You will need a recovery media to restore the windows once you have installed the new SSD or HARD disk.

  You can get possible by contacting HP Support. Here's how:

  > http://support.hp.com/us-en/document/bph07143

  > http://www8.hp.com/us/en/contact-hp/contact.html

  > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  Feel free to post if you have any other questions.

• What is the difference between a hard disk 7200 RPM and a 5900 RPM HDD?

  I guess, but doesn't this average 7200 tours / minute.  A 5900 would be difference of 1300 towers.

  Hello

  Faster a car runs faster, it can access the files. Of course, there may be other differences
  that affect speed such as the cache size, number or heads and others.

  Check the transfer rate DTR (Data) - slower disks are usually cheaper.

  Hard Drive - see access time and seek time
  http://en.Wikipedia.org/wiki/Hard_disk_drive

  Data transfer rate

  http://en.Wikipedia.org/wiki/Hard_disk_drive#Data_transfer_rate

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• T60 60 GB SATA 320 GB HARD drive upgrade

  I know just enough to be dangerous, please bear with me.

  I have a T60 1953 - D7U with the original Toshiba 60 GB HDD SATA/150, which is saturated.  I've used Norton Ghost to copy the 60 GB drive to a Fijitsu 320 HDD SATA/300, which was in an external USB enclosure.  Both are 5400 RPM.  I copied the MBR.

  After that I installed the 320 GB drive, the T60 will not start.  Using F12 to interrupt the boot process, I see the listed 320 GB drive, but apparently it does not appear as a boot drive.

  Is there anything else I need to do for the T60 to boot from the new drive?

  Note: the controller SATA Mode Option is set to "AHCI".  The other option is "compatibility."   That this has something to do with it.

  Add ' l Info: initially, I tried to copy the 60 GB and the 320 GB using Acronis True Image v7.0 which was on a bootable CD.  Acronis has a msg of error E000101F4 No. Drive 0 Found.  She not only saw the attached USB 320 GB drive.  That's why I went to Ghost.  Y at - it no problem using Ghost for this copy?

  Thank you very much for your time.

  Pontiac196, welcome to the forum,

  the SATA mode has nothing to do with it, the problem here is that your player target must be inserted as primary drive in your T60 for the cloning process to work.

  The following knowledge base articles must contain I hope that all the info you need.

  X 61 image deployment - a material similar to T60

  Cloning R61 - a material similar to T60

  T61 HDD Upgrade - a material similar to T60

  Happy, cloning and let know us how it works.