Failure of the backup...

Similar Questions

• what it means when your computer say-"your disc is a failure, start the backup process."?

  What it means exactly when your computer say-"your disc is a failure, start the backup process."? I know that's not good, but what is it? And that's something that I can fix with some instruction? Thank you, Brandi

  Hello

  If the message is correct, your hard drive is defective and must be replaced

  Your hard drive contains the operating system and all your files, photos, music, etc.

  Back up your data:

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

• 4.1 Data Migration tool - "error: failure of the backup of the configuration of the vCenter Orchestrator.

  While following this KB article, I came across an error.  I googled a bit but it is really not a lot on that.  This process took me the better part of a month to get to this day.  Now all I have to do is migrate my databases and settings...  However, as with everything else I came against from 4.0 to 4.1 (and building a new server to do), nothing seems to be going my way with this project.

  Anyway, I executed the script of backup.bat several times and each time, it failed in the same place.  The error given is "error: failure of the backup of the configuration of the vCenter Orchestrator."  The log file has been attached.  I rebooted, made sure that all VMware services have been arrested and still no joy.

  Any help would be great!  If this isn't the case, I'll have to make another call to the support team.  I played with VMware products for years and I've never had to call until this project came.  In this month alone, I opened 4 tickets!

  2010-09-24

  0723 EDT

  I'm almost certain that this can be ignored without risk, especially if you do not use Orchestrator.  I recently made a 4.1 migration to another server and got the same error - I had any issues at all.

• Finish the backup after the failure of the backup

  I have Vista Home Premium and has begun in full who has not completed a new backup (not) because of the lack of free space on my external hard drive. So I released the space by removing an older backup. After stopping and restarting my PC because of display problems on the monitor, I wanted to try and resume the backup failed, but it seems that Windows is now again a new full backup. Is it possible to get just Windows to complete the first incomplete backup, without having to start a new backup complete? Thank you in advance.

  In fact the backup failed threw when I clicked on backup files. Initially, it seemed Windows began a new full backup but backup completed in less than an hour and added the files to the backup incomplete, similar to an incremental backup. I guess that Windows has recognized that the new backup had not completed and recognized the game on the external hard drive to backup.

• Failure of the backup do a cliché? Help

  Hi, I just tried to make a backup on a DVD and I got this:

  
  
  The backup has failed.
  A snapshot could not be created for the following
  Reason:
  
  
  Insufficient storage available to create the
  shadow copy or other shadow copy data storage file.
  (0x8004231F)
  
  
  Time of the backup:
  The backup location: DVD RW drive (e)
  
  
  What should I do?  Thanks /.

  Hi Winston,

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  Follow the suggestions below for a possible solution:

  Method 1: Check if the Volume Shadow Copy service is running.

  a. click Start, type services.msc in the start search.

  b. find the shadow copy volume service.

  c. right-click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.

  d. If it is stopped, select Start or restart. Make sure that the service is started and set as Automatic.

  e. click apply and OK, if you make any changes.

  Method 2: Check if you delete temporary files using the computer. Disk Cleanup allows you to do the same thing.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Method 3: I suggest that you unplug any external drive connected to the computer except the keyboard and mouse.

  This error message can occur if there is some system files corrupted on your computer. I suggest that you run a scan SFC (System File Checker) that would be a system file corrupt on the computer search and replace.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  Method 2: If the method above does not resolve the problem, then I suggest you put the computer in a clean boot state and then try to backup.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Hope this information helps.

• Still some errors in the backup, but this time less.

  Still some errors in the backup, but this time less.

  RMAN > backup database;

  From backup 13 / SEP / 17

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 26 type of device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/09/2013 20:18:25

  ORA-19602: no backup or copy of current file in NOARCHIVELOG mode

  continue other job steps, not a not working will not re-run

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  including the current control in the backup set file

  including current SPFILE in the backup set

  channel ORA_DISK_1: starting piece 1 13 / SEP / 17

  channel ORA_DISK_1: finished piece 1 13 / SEP / 17

  piece handle=/u01/app/oracle/flash_recovery_area/DB11GR2/backupset/2013_09_17/o1_mf_ncsnf_TAG20130917T201824_93kwblqh_.bkp tag = TAG20130917T201824 comment = NONE

  channel ORA_DISK_1: complete set of backups, time: 00:00:01

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 17/09/2013 20:18:25

  ORA-19602: no backup or copy of current file in NOARCHIVELOG mode

  RMAN >

  Please can someone tell why I have errors?

  Thank you. Dan.

  Why you send messages again the same question?

  https://forums.Oracle.com/thread/2582524

  Thank you!!

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Failure of the Time machine backup could not save "My Passport"

  When I try to do a backup on my Passport using Time Machine, he used to work over the years, and now it is the message I get:

  Failure of the Time machine backup could not save "My Passport"

  
  

  Does anyone has an idea to help me with this problem?

  
  

  (Sorry for my English but I speak French in Switzerland...)
  

  Have you tried to run utilities disk to check/repair the external hard drive? Here is something you can try.  http://pondini.org/TM/A4.html

• I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I have a drive mapped to a Server 2008 all the hours his loses drive mapping and the backups in case of failure

  I get the error message is could not reconnect account currently disabled mapped drive .so I remap the disk with the same user name and password and it reconnects

  * original title - Networking file sharing file sharing file sharing file sharing Fileshare discovery network shares mapped shared part readers *.

  Hi SCS PCs

   

  I would recommend checking the Microsoft TechNet community. Please visit the link below to find community which will support ask you in the right direction for the linked domain questions.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

   

  I hope this helps.

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• Failure of the master node and the backup in VSAN 6.0

  Just curious as to what will happen to VSAN Cluster if master node and backup is omitted VSAN 6.0 cluster. Lets assume there are 10 esxi hosts in this cluster.

  It assumes that you implement a FFT = 2, which means all your VMS survive this double failure.

  Another host in the cluster will be the responsibility of the master, and the other will take responsibility of the backup.

  This may take a little longer than normal, as the new master and the backup to learn more about the configuration and rebuild the contents of the directory (that's what the backup node already for a quick conversion to master the master goes down).

  Other than that, affect without side effects.

• backup failure Time machine - the backup folder creation error

  I use a backup drive 1 t Seagate firewire for about 2 years without fail. Now, when you start the backup, I get the following error message:

  "Unable to complete backup. An error occurred during the creation of the backup folder. »

  In addition to the above message that occurs when I start the backup manually, I get an error message that the backup was properly ejected.

  I read the advice "Repair Disk" - this will affect my backups?

  Other tips before I take it to the Genius Bar?

  MBP 15 "mid-2010

  10.11.2 OS

  Memory 8 GB 1067 MHz DDR3

  Processor clocked at 2.66 GHz Intel Core i7

  ERD will not affect your data. However, before you do something, you must correctly eject disk backup, and then re - attach. Repair the drive to aid first aid disk utility option in the toolbar.

  If you first open the Console application in your Utilities folder you will find information in the log of what happened past.

• Failure of Windows backup while trying to read from shadow copy on one of the volumes to back up

  Original title: how to fix the cliché has failed during the backup

  Using Vista Home Premium Svc Pk 2, I get the "cliché failed" and did not finish the backup.  How can I fix it?

  Hello
  1 did you change on your computer before this problem?
  Follow the suggestions and see if it helps.
  Method 1
  You can follow the steps in Windows upward and the startup type of the service Volume shadow on automatic
  (a) click Start .
  (b) in the search box type Services.msc
  (c) make a right click the service and go to Properties.
  (d) select Automatic from the Startup type of the menu drop down.
  (e) click apply and OK.
  (f) restart your computer.

  Note: Once you restart the Volume Shadow Copy service all restore points will be deleted.

  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  You can also run the disk check.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
  Note: You may lose data while Windows tries to repair bad sectors on the hard drive.

  See also:
  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455

  Note: The article is also applicable to Vista.

• Backup Windows survey the failure error code backup 0 x 80780048 - not enough disk space on the destination drive.

  The backup includes a complete image of the C: System and all files on drive C: (used space on C: = 377 GB), goes to an external hard drive with a capacity of 930 GB (540GB free on external). The size of the backup when the backup has stopped and gave me the error: 295.4 GB (leaving 347 GB of free hard disk external) backup took more than 13 hours. I use Windows 7 Ultimate (64-bit, 1 MS) on a Dell XPS 17 L702X. Full size of hard disk installed (drive c :)) = 500 GB.

  I have no idea whether or not Windows backup really did all my files saved or if or not he managed to obtain a complete picture of the system in the backup. I absolutely need to have the two all my files and an image of the system as a backup because I change my OS drive of 500 GB for one SSD drive smaller hard drive. This 500 GB drive will be wiped out and used as a storage device, but I'd rather have the ability to restore to its original state if something goes wrong. I hope you can solve this problem for me.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum meets for a windows problem reports. I know that I was very impressed when I tried it. Three I'm familiar with and like Norton Ghost (which I use for 8 years no 1 problem), Easeus Todo Backup free, you can download it from

  http://www.TODO-backup.com/products/home/free-backup-software.htm and Memeo , which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com . You can get Ghost for almost nothing (like me), if you look at the sales.

  The March 2012 issue of PC World is very high on the program FREE of Easeus and I tested it recently in a variety of configurations; and must say that I am very impressed. As Ghost will support up to a network drive and it will create a bootable CD for when your PC does not start. See commentary to PC World to

  http://www.pcworld.com/downloads/file/fid, order 80031, 4/description.html .

  -

  CNET has a lot of reviews of backup program to

  http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).

  -

  External hard drives are the best for backup. You can get a 500 GB one for $70 and a 1.5 to one for about $90. You can also buy a flash drive of 32 GB for less than $20. It is the best insurance you can buy ever!

  -

  I hope this helps. Good luck

• OEM12c: Container of data in case of failure to schedule the backup-ORA 20411 - ORA-06512

  Oracle Enterprise Manager Cloud control 12 c - 12.1.0.3

  Oracle Database Enterprise Edition 11.2.0.3

  Oracle Enterprise Linux 5

  Database container:

  Oracle Database Enterprise Edition 12.1.0.5

  Windows Server 2012 R2 Standard

  OEM12c: Container for database fail to schedule backup

  ORA-20411: the following parameters have a NULL value: db_connect_string ORA-06512: at "SYSMAN.". EM_JOB_OPS', line 290 ORA-06512: at "SYSMAN.". GC_JOB', line 29 ORA-06512: at line 1

  Thank you

  Marcelo brands

  ESRI, technical director, OCP

  I solved the problem by following these steps.

  1 OEM12c > target > all targets > 'remove the motor pump target database '.

  2 OEM12c > target > all targets > systems > "to ensure that the target database system is also removed.

  3 OEM12c > Setup > manage Cloud control > Agents

  -Restart the agent database of the target container

  -It refreshes the C:\oracloud\agent_inst\sysman\emd\target.xml in the target database server where the agent is running

  4. in the server database, make a backup of the C:\oracloud\agent_inst\sysman\emd\target.xml file

  5 edit the file C:\oracloud\agent_inst\sysman\emd\target.xml

  -Remove all the entries that refer to the database of the target container

  -my case the xml file has several entries with different target system names pointing to the same target, weird container base, do not know how this could happen

  -J' removed all the and saved the xml file

  6, OEM12c > Setup > manage Cloud control > Agents

  -yet again, restart the agent database of the target container

  7 OEM12c > Add Target > manually add targets

  -Add the database to the target return container to oem12c

  8 OEM12c > target > databases

  -wait a few minutes for the target container of database state, to be 'green '.

  -Click on the database of the container link

  -Click availability > Backup & Recovery > scheduled backup...

  !!! It works fine now! I can create the backup job.

  Thank you

  Marcelo brands

  ESRI, technical director, OCP