failure of the installation of the driver software for Bluetooth headset (PLT_M1100)

Similar Questions

• Where can I get the driver/software for Satellite A500/02J disc

  Hello

  Newbie here, just want to ask, are there at - there a driver/software for laptop Toshiba A500/02J disc.
  I just bought a new and its been not formatted, so no recovery partition where drivers would be.

  I searched the net looking for face recognization software, etc., but nothing works.
  There must be a drive to install there somewhere...

  Can someone help a newbie?

  Concerning
  Carl

  Hello

  The laptop has not been handed over with the recovery disk because there is a pre-installed tool called Toshiba Recovery Disk Creator.
  This software could create the recovery disk that allows the laptop to factory settings still.

  By the way; Satellite A500/02J is an Australian for Toshiba laptop model and drivers must be available on the Australian Toshiba page:

  http://www.MyToshiba.com.au/home

  Welcome them

• Can not find the driver software for your device

  I have Windows Vista Home Premium (64-bit) SP2.
  Had a card just before SCSI Adaptec AHA-2940U/UW working in XP the operating system upgrade.

  -System sees this controller in Device Manager
  -Adaptec has Vista drivers download (32 - bit, 64 - bit no)
  -Downloaded the drivers on my pc and extracts into a folder
  -Open the Device Manager and click on update drivers for this device
  -Made to the location of the new drivers and tried to install

  The results of action in this post:
  "Windows could not find driver software for your device".

  I do not understand 32 bit vs 64 bit one nonsense, but I installed many programs, which are almost 32-bit without any effort.

  Is there a compatibility mode for the drivers?
  How can I get through this?

  Should the real name of the device (AHA-2940UW) be in the list of official feature of Vista to install it?
  (i.e. If I were to add a device and choose the category manually storage controllers, it has a lot of Adaptec products in it, but not mine.)
  If this is the case, is there a way to add the device manually to Vista?

  The SCSI controller has a single function, driving my Microtek scanner, which is so well built and reliable I can't part with him. :-)

  Thanks mucho in advance for one of your tips and tricks.

  No drivers available for Vista 64, I'm afraid.

  And no compatibility mode for drivers.

  Sorry

• Can't download the driver software for FSUP-related

  Hello

  I tried to download the driver for R & S FSUP. It took a third-party Installation. When I click on "Go to the download Site", it's weird retractable coding. Something like that

  UNHANDLED EXCEPTION: ORA-20802: ORA-20802: ORA-20802: error in T_NIUP_EMAIL_PRVT. T_NIUP_EMAIL_PRVT(). Invalid Profile_id = NULL field ORA-20805: - PL/SQL call stack - line object handle number name of 21 3b49414f0 APPS package body object. NIUP_EXCEPTION 3b54c64a0 89 APPS. T_NIUP_EMAIL_PRVT 3b68d8438 58 APPS. T_NIUP_EMAIL 3b65074f8 package 55 body APPS. NIET_DOWNLOAD_ID 3b435ccd8 31 anonymous block

  Please advice.

  Try this. I also presented comments to indicate a problem with the link.

• ENGLISH driver & software for printer F2180

  Hello

  Hope someone can help me, have been download/try all afternoon & I'm going nuts now!

  I want the driver & software for my F2180 after I reinstalled Windows7 (32 bit). Select the language I want ENGLISH, but whenever I extracted the file & go to install I have the Dutch version! What's happening & how do English?

  I used this:

  DJ_AIO_NonNet_Full_Win_WW_130_140.exe [1/1, 245.67 M]

  I looked around here too, but getting links for this one (and still get it in Dutch after download!) or a version of Vista is not working.

  Help!

  Thank you!

  What is the non-Unicode language setting in the region and language and administration?

• Installation of the driver software window opens on the second monitor in a dual monitor extended installation of the monitor

  The "Software Installation" window will open on the second monitor in a dual monitor extended installation of the monitor

  I have a dual display setup. A 225WS 1680 x 1050 monitor LG is connected via a VGA cable and a VGA - DVI converter to a DVI port on a Radeon 6850 video card. The second screen is a Samsung HDTV set at 1920 x 1080 and connected via HDMI on the same video card. I have set up the screen LCD as main monitor and the Samsung HDTV as the extended display. HDTV is most of the time, but I use it at least once a day. This isn't a driver problem, because it happened also when I had an old Nvidia video card and it is fixed by a new installation of windows and setting up of screens from a square.

  The installer works great almost all the time except when I try to use some programs or Windows functions (7). When I try to start the MozBackup application or I pop in a new usb device and click on the notification bubble, both these windows (MozBackup and the "Driver software Installation" window) open in the center of the HDTV as opposed to the LCD (which is defined as primary). The problem is that the views are ~ 3 meters out and HDTV is mostly off.

  I sent a bug report to the developer of MozBackup because this part is perhaps a problem with its software or what old Windows functions and hooks it uses, but the window "Installing the driver software" (or who knows what other program Windows Basic) has exactly the same problem and is part of Windows.

  What can I do about it? I DIDN'T put the displays in any mode "clone" to have office in mirror between them. Is - this fixable somehow? I guess that is not a problem with the video card drivers because I used two different video cards with either the manufacturer or windows update drivers and the problem is the same.

  I'm talking about a window similar to this one
   
  http://jaunty-electronics.com/blog/wp-content/uploads/2012/09/Freedom_FRDM-KL25Z_driver_install.PNG

  Try changing the backup.ini

  you find it in

  .. \Program files (x86)\MozBackup\backup.ini

  Open the file backup.ini with editor

  Check if you have the rights to save the changed files in this directory. You may need to change the Directory rights

  Change the value of "1": monitor

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =1

  '2' or whatever the value of your primary monitor is:

  wyzodir =

  ; Monitor: the monitor number where MozBackup window will appear

  monitor =2

  System main screen could be identified as '1 '. If you have changed the monitors, it can be used internally '2 '.

• When I try to run the Netgear software for use with my new router, I get a pop up window that says only: "service failure".

  original title: WIFI ADAPTER 'SERVICE has FAILED.

  Although my new Netgear dual-band "N" WIFI ADAPTER works optimally and, out of curiosity, I have re-installed several times using the accompaniment CD... there is a small problem I want to solve: when I click on the WIFI adapter desktop ICON, I get a window of PSI with the message "FAILURE of SERVICE.  Yet once, WIFI actually moved and is also indicated under the programs/features and works perfectly well.  When I bring up the icon under all PROGRAMS, the same result occurs: the same message reappears: "FAILURE of SERVICE.  When I called Netgear to the Philippines call center, support staff of so-called tech advised me to ignore the message and that I was the first caller on this issue, "as long as the WIFI adapter gives you the desired signal quality and speed, just ignore... "When I pressed on others, a supervisor at the call center told me that she would pass on the information that I provided to their engineers to study the problem.  In addition, the supervisor told me that no one had contacted the Center to call on this particular issue.  Yes, I even disabled the built-in WIFI adapters (Atheros), but the 'problem' in question still exists.  Please note that it is a phenomenon of long months and that in the past whenever I clicked on the ICON, the regular Netgear Windows would come upward, including the various hot spots in option, etc. I even updated the software successfully and rebooted the laptop, according to Microsoft's Windows Update instructions.  Please let me know what is happening and how I could fix this ' cosmetic ', if that's what it is, according to Netgear support.

  Thank you very much.
  Joe

  Hello

  You can read this article and check if it helps:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For the first try to not use the utility of Netgear wireless. Often in Windows 7 Wireless works perfectly without special use of the adapter. If this map needs of the Netgear utility, in case something went wrong during installation I suggest you uninstall it and then reinstall. Also allows to download the fresh software for the Netgear adapter...

  Click on the link below
  http://KB.NETGEAR.com/app/answers/detail/A_ID/12998

  register with Netgear, and then download the software.

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• HP deskjet 3050 a j611 can not find the driver software when connected

  I tried to plug my new printer Hp deskjet 3050 a j611 range but can't get furthur than coonecting because it can not find the driver software. I had to download the driver software myself via this link http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=5061082& but once I downloaded that and is entered in the details of the wireless connection, it cannot find the driver software. I can't use the CD my drive is broken and I am awaitng delivery of an external in a few weeks, but I'd like to get my printer started. Help, please

  Hello Buzbybumble

  I looked into it further and found that all J611 Deskjet 3050 a models use the same software. So, you should be able to download and run the installation from the link below.
  Software HP Deskjet 3050 has complete features J611

  IMPORTANT: Make sure that the printer is not connected to the computer until the installation program ask you to do. Run the Setup and follow the instructions on the screen.

  If the printer is not yet seen, then choose the option "continue INSTALLATION WITHOUT CONNECTION NOW I WILL CONNECT the PRINTER LATER. A shortcut must be placed on your desktop and it will try to add a printer when it is executed.

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• Receive the following error: Windows found driver software for your device, but encountered an error so as to install it.

  The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)

  Hi Mohan kumar,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:

   

  Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.

  http://support.Microsoft.com/kb/940267

   

  Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if that helps.

• Install the driver software view, is it a scam?

  Whenever I turn on my computer, once everything is a window pops up saying: Windows needs to install driver software for your PCI Serial Port when I close the window it pops up at least twice. I see not the window until that after I turn on my computer. My computer is Windows Vista. I need to know if the software is a scam or not.

  Go to control panel > Device Manager and see if there is no yellow exclamation next to devices. If there is, then it's certainly legitimate and you need to get the drivers for this device. If you have an OEM computer (Dell, HP, etc.) and the device supplied with the machine, download the tech site Web support OEM drivers. If it is a desktop computer and that you have installed a PCI card yourself, download the PCI card mftr Web site drivers...
  MS - MVP - Elephant Boy computers - don't panic!

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Do not know how to install the driver LAN for Satellite A100-787

  The driver LAN for Satellite A100-787 is delivered with no configuration file and windows hardware installation does not recognize.

  I don't know how to install it... Any help?

  Hello

  I guess you are trying to install the driver LAN WXP because Vista LAN driver is not available. Am I wrong?

  In any case:
  -Create a new folder on your desktop
  -extract all downloaded files here
  -Open Device Manager and right-click on device unknown you want to install
  -choose Properties
  -find the Install driver button
  -Click on it and go to the new folder created
  -Follow the on-screen menu

  I hope that you can install to ti the pilot FTAs.

  Good bye

• How can I download the right software for my new epson perfection scanner?

  How can I download the right software for my new epson perfection 1250 scanner?  I have already downloaded TWAIN driver but that does not seem to do.  He came with a disc, I got from the thrift store.  Thank you Lydia

  Monday, February 27, 2012, 21:57:09 + 0000, lydia111111 wrote:

  How can I download the right software for my new epson perfection 1250 scanner?  I have already downloaded TWAIN driver but that does not seem to do.  He came with a disc, I got from the thrift store.

  Go to the Epson website and find the Epson perfection 1250 for
  your version of Windows. I don't know if it exists or not, but if
  for this, you will find it here.

  Whenever you switch to a new version of Windows, you must install
  drivers (software that interfaces between the hardware and)
  Windows) for printers, scanners, video cards, etc., which have been
  written for this new version of Windows.  And also note that you need
  different determinants for a 32-bit version of Windows and a 64-bit
  Version.

  It is the manufacturer of the hardware to write and
  available to download these drivers. Especially if your hardware is
  older, it is quite possible that the manufacturer has decided that it is not
  a value of his time and effort to develop drivers for the hardware that it is
  selling more.
  Check with the manufacturer or on their web site to see if a pilot
  There are. If it, download and install it. If it isn't, you're out
  lucky. Also consult their websites in other countries, if there is
  None; Sometimes you can find the driver you need in this way.

  In the future, before making such an upgrade, make sure you have
  done the appropriate research to find out what drivers do not exist,
  and so what equipment you need to replace if you upgrade.

  Ken Blake, Microsoft MVP