failure of the LCD

Similar Questions

• failure of the LCD... Please help how to solve this problem?

  Today, when I went from my laptop, a vertical rectangle in the meddle of my screen along top down (with less brightness of my screen background color).

  First I thought that it map graphic, but when I connect my laptop to my TV, the rectangle disappear, so it's right in the screen of my laptop.

  I tried to upload a screenshot turned to my office, but also the rectangle isn't here, so I see it only in my screen (average in the screen of my laptop). but I send a page to my office, and I used the paint program to give you an idea how my screen looks like

  but I couldn't uploaded here, you will enjoy if you can show me how to download

  Thank you

  It sounds like a hardware problem with your laptop, and there is probably nothing we can do to fix it here.  Have your phone checked by a reputable or approved repair facility.

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Interesting solution of failure of the fans occasionally cold start?

  Interesting solution of failure of the fans occasionally cold start?

  Normally I do a reset of the SMC, sometimes it's the solution.

  When kick cooling fans as soon as I start my cold iMac, I just quickly swivel the iMac slowly from right to left and the cooling fans have stopped.

  Strange?

  All the answers?

  Note: I use an iMac 21 inch end 2013-2, 7 GHz Intel Core i5

  Thank you in advance for the answers.

  This sounds like a sensor loose or pinched wire.

  You may be able to see the problem of sensor or sensor wire with the diagnosis of Apple to test or a third party temp. followed by the application, but the best would be to book a service appointment at your local CENTRE.

  Apple Diagnostics using - Apple Support

  https://locate.Apple.com/

• failure of the SIM, why I this message all the time?

  failure of the SIM, why I this message all the time?

  This means that your SIM card is defective or otherwise expired

  Can you make and receive calls and texts?

  If so - go out the SIM card - wait about 45 seconds and re insert it back

  If not - contact your carrier for a new SIM card

  Remove or change the SIM card in your iPhone or iPad - Apple Support

• How much will cost to repair the glass and the LCD to an iPhone component damaged 6 in the Apple Store?

  My partner has dropped his iPhone 6, visibly cracked glass and damage the LCD behind (distorted lines). How much will cost to get the two components repaired in-store? And this is something that can be done on the spot?

  Much obliged,

  KJH.

  See iPhone pricing of Service - Apple support (change the country in the lower corner on the right if you're not in the United States)

• Tecra S1: Notebook generates noise when the LCD display is on

  Tecra S1 is 4 years old and generates a high noise when the LCD is turned on (from last week). The noise comes most of the keyboard. Could this be a defunct ups?

  Is there an easy way to fix it? It's not very loud, but in a quiet that is audible.

  Hmmm I think this noise comes certainly from the FL inverter.
  But I can't tell if the inverter is faulty or not because I noticed that her top on different laptops when the brightness of the display is placed on the lower floor.

  But if you think that this problem was not present in the past, then you need to contact a technician who could help you replace the inverter FL.

  Best regards

• Qosmio X 70-B-10 t - failure of the graphics card

  Hello. I offen had failure that the graphics card driver hang up and recovered himself. But today, I got this failure to the course to watch live TV streams and it seemed to me that the laptop does not work correctly. I tried to restard and then I get this message: DRIVER_IRQL_NOT_LESS_OR_EQUAL (cmdhlp.sys). It must be the graphics card and I don't think it's a hd or RAM failure in this case.

  Any tips? Repair? New graphics card?

  Thank you!

  On this virtual path, it is not easy to say what can be the reason of this failure.
  Repair is always the last step. What you can do is to test the features using Notepad with "factory settings, without having to install additional software.

  What operating system do you use?
  Do you use the original display driver or some day?

• Satellite M70-309: how to clean the LCD?

  Hello world!

  I have Satellite M70-309, so how do I clean finger LCD, dust, ecc... ?

  Thank you!

  Hello Rocco,

  Usually mine clean with a slightly damp cloth (wipe softly on the surface) and then just dry with a cloth. This command removes all the dust and finger marks.

  I also used a normal domestic surface cleaning spray (used sparingly) applied with a cloth and this removes any greasy fingerprints that can be on the screen.

  It is very important to not to use cleansers, abrasives or solvents as they may damage the surface of the LCD screen.

  Kind regards

• Tecra 9000 - no display on the LCD screen when you turn on

  I recently got a Tecra 9000 for cheap on eBay. I am experienced with the construction and repair of computers, but not so with laptops.

  The problem with this laptop, it's that do not display on the LCD screen when you turn on. It was just black, no backlight, nothing. I took the laptop all share, found no obvious problem. I had to turn it on and the screen lights up a few times trying to figure out the problem. Would it be a bad connection? Or something else?

  After getting it to start work, I'll try to start to put it back together and it stopped working again. I haven't not been able to reduce it to know if it's a bad connection or a card problem.

  Someone at - it suggestions? This is a problem for others here?

  As you describe the issue, I think it is somehow a bad connection or a damaged cable, because it does not work once you have disassembled the screen.
  Maybe you need to check all the cables, leading motherboard to the LCD and take a close look, maybe for a few scratches or strong curvature.

• Qosmio F20-155: how to clean the LCD screen?

  How can I clean the LCD qosmio f20-155

  Hello

  Check this post on the same topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14642

• Brightness of the LCD in the BIOS

  I would like to know which of available Toshiba laptops currently would allow me to set the LCD brightness level directly in the BIOS.

  Hello
  I don't think this is possible, but if you are on windows, there is a way to change the default brightness. It is closely related to the "modes of energy toshiba".

• Satellite A100 - display balack after replacing the LCD screen

  Hello

  So I'm trying to fix a LCD on a Satellite A100. The girl I am set as said she accidentally hit the screen with his hand and became black.

  When you turn on the laptop I can here windows activate, nothing is on the LCD screen. It is not the backlight, because I don't see anything on the screen at all. So I bought a replacement LCD screen and that one does not work either. Same question

  I think it is the inverter, any suggestions?

  Could be the sensor cover?

  Thank you! Kyle

  Hi Kyle,.

  Did you buy this new LCD screen to a service provider authorized? I ask this question because it would be interesting to know if it s a Toshiba valid a party or 3rd party a spare.

  Did you check the connection of the LCD cable? There may be a link to lose or the cable itself is touched.
  Theoretically, it might be the FL inverter too, but I doubt that. Otherwise, you'd see something on the screen but very dark.

• Failure of the audit on the iPhone, but works in iTunes

  Hello

  I had a strange problem:

  I can log on successfully to my desktop (Windows) by using my AppleID, can see my account balance and buy free apps.

  But I use the same AppleID on my iPhone 6Plus, it always shows: "failure of the audit, your Apple ID or password is incorrect."

  can anyone help?

  Thank you very much.

  Hi all

  After 2 hours of research and new attempts, I finally solved this problem.

  1. just to keep a new attempt on the iPhone, until the account is locked.

  (Note, only the account on the iPhone is locked, can I still use iTunes Windows and web to connect on the same Apple ID]

  2. then follow the instructions on the screen to unlock the account.

  (you will be asked 2 secret questions when the account is set up a few years ago)...

  Once the reset is OK, the same account is included to connect the iPhone and buy apps.  (Yes..!)

  Hope this will be useful.

  kpang1

• Satellite M60-104 - vertical lines on the LCD

  Hello guys,.

  I have a Toshiba Satellite M60-104 and in recent months, I noticed vertical lines on the LCD screen. How can I solve the problem?

  Any response will be useful,

  thanx

  Hello

  First of all, you should check if you have the same problem on an external monitor. So you can check if the problem is the graphics card or screen.

  However, I think that the motherboard or display needs to be replaced. To do this, you can go to an authorized service provider.

  Welcome them