Failure of the system for Windows 8 image backup

Similar Questions

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Failure of the system recovery: Windows installation error message

  System: HP Pavilion a6554f

  OS: Windows Vista

  I replaced a hard drive failed (replaced 1 TB 750G).  Used my system recovery disks.  Recovery system worked well.  After the recovery is complete, Windows began to install and finally comes up with the message: "installing Windows could not configure Windows to run on this computer hardware."

  Recovery tried again, same result.

  Any suggestions?  Diagnosis recognizes the processor, the memory, and drived hard (all past).

  My apologies.  Another thread has answered with the same problem I had.

  Here is the response copied from this thread...

  I used a builders or OEM copy because the owner could not find their burnt copy and HP is no longer a media available for this model.

  Below you will find an article I googled describing the error and the fix.  Simple.  Once, I changed RAID on AHCI, no problem.

   

  Here is the Solution!

  Here's how:
  　
  Option 1: (as Microsoft says, http://support.microsoft.com/kb/2466753/en-us)
  -Configure your BIOS, change the method to control RAID AHCI or IDE / ATA
  -Get your chipset AHCI drivers from intel and load them when the installation program asks you (onscreen that choose you where to install windows, there is a button labeled as 'Drivers')

  the url is http://www.vistax64.com/general-discussion/295950-help-windows-setup-could-not-configure-hardware.ht...

  Thanks to everyone who offers great help!

  Darryl

• What are the requirements of the system for Windows XP Embedded?

  Original title - XPF to the catalog

  I'm trying to find the system requirements for Windows XP Embedded and how it will be different with respect to the adding and removing of the components.

  Thank you

  Greg

  I'm trying to find the system requirements for Windows XP Embedded and how it will be different with respect to the adding and removing of the components.

  Thank you

  Greg

  Hi Greg,.

  You can test it yourself by using this evaluation version:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=17433

  See also: Windows XP Embedded System Requirements

• Update the system for Windows 7 tool - I can download it but I can not intall it and this prevents me to install all other updates.

  Someone had problems install this fix for Windows and how solve you it?

  Hello

  1. what exactly happens when you try to install the System Update Readiness Tool for Windows 7? Do you receive an error message?

  You can try to install update of the tool system by placing the computer in a clean boot state and see if it settles, as there may be interference from third-party software during installation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Please check if you are able to install the system update readiness tool, also let us know about what error message or error code you get when windows updates.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• I did a restore of the system for Windows XP and I made updates to MS. I'm stuck now. I can't upgrade to SP3 and windows update doesn't work, get 0x8024400A error

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Hello

  Have you made changes on the computer before this problem?

  Follow the below methods:

  Method 1:

  Follow the below the article that says how to resolve error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

  Method 2:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  Hope the above information is helpful.

• Specifications of the system for Windows 10 technical overview?

  Greetings,

  So guys, I thought install Win10 Technical Preview (to get in touch with this new update coming) in my pc, but then I thought since I is not such a great pc, since a player im, win10 will use more my RAM and turn my pc slower?

  Thank you.

  Can I upgrade my existing version of Windows to Windows 10?

  Given that Microsoft made available the first version of the preliminary version of Windows 10 in early October 2014, there was a misunderstanding that this is not a product you use to replace a facility for production of Windows such as Windows 8 or 7 or Vista. On the other hand, if you test it on one machine, the best recommendation is to create a partition or have a spare ready hard drive where you can install it. Windows 10 in its current state of the pre-release will expire, and at the same time, it's unfinished work. So if you need to evaluate it, the best way is by installing it next to your commercial installation of Windows.

  If you choose to upgrade your existing Windows to Windows 10 version, please be warned, it will make your recovery in functional partition, requiring to have separate recovery media to reinstall if necessary.

  Where can I get more information about the preparation of my computer safely for Windows 10 tests?

  • How to install the latest version of Windows 10
  • How to: create a Local account during out-of-box installation experience

  How to dual boot, the latest version of Windows built with earlier versions of Windows

  • How to: build 10 tips before installing the latest version of Windows 10
  • How to configure a virtual machine using the Hyper-V technology

  How to migrate Windows 10 Preview release: Dual Boot to install and protect the accumulated data

  • How to: Reinstall or restore your original Windows installation after reviewing previews of 10 Windows

  Backup your current Windows installation. Because you will make important changes on your computer, you should always back up before doing so. It is strongly recommended! See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

• M3800 Precision how to create the system for windows recovery disc 7 without cd player

  Precision M3800 does not come with CD player. How can I create rescue disk to restore the system or system to go back to a restore point?

  Chris Chan

  CD/DVD media is a thing of the past, you must use Dell Backup and Recovery to a 16 GB Bootable USB Flash Drive:

  http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery-1-8-1-71/

• Wanted M6 Sleekbook: Can I get my free 10 Windows upgrade after a recovery of the system for Windows 7?

  Hi guys,.

  I have a HP Envy M6 Sleekbook. It came with Windows 7, and its warranty expired 2 years ago. I took the offer to get a free upgrade of Windows 10 a few months ago. Now, I want to exchange the hard drive out. I have a ready to run on a USB system recovery but its for the original configuration of Windows 7...

  My question:

  Is there a way I can share disks and get 10 back Windows without paying? HPO only allows you to create a system USB once recovery disk, so I can't make a new record of recovery with windows 10. When I get the factory Windows 7 running on the new hard drive, I'll be able to upgrade to Windows 10 new since I already had it and I wanted to just swap drives?  Thank you!!

  This link should help you get started: upgrade Windows 10  

  You can install Windows 7 with your recovery discs and then upgrade to Windows 10 or you can create a Windows [USB/DVD/ISO] 10 installation media and use it to make a 'clean' on the new hard drive installation.

  Notes on activation:

   

  • If you have never installed and activated Windows 10 on this computer before, you will see the activation screen. Enter your key of Windows 10 here. If you do not, but you have a valid 7, 8 or 8.1 key, enter it here instead.
  • If you have already installed and activated Windows 10 on this computer before, click on "I don't have a product key. Windows will activate automatically after installation.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• Update tool of the system for Windows Vista (KB947821) [August 2010]

  There are at least 2 updates security I can't apply any key of registry, or direct download available.

  Microsoft, when you have a web page in Windows Update that says 'Additional information' provide a download that is easy to find and all subsequent web pages using the same or similar format.

  See the section "How to get help" http://support.microsoft.com/kb/2207566 or http://support.microsoft.com/kb/981957

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failure of the update for Windows Vista (BK3087918) security

  Can someone tell me what I should do to get this update of safety at work.  All other 18 updates succeeded.

  Thank you

  3087918 is an update to windows media, if windows media center is not installed, then the

  update is for a different OS... Get the details here.

  https://support.Microsoft.com/en-us/KB/3087918#/en-us/KB/3087918

• How to fix code 8007000D that appears whenever I try to run the platform for windows vista update?

  I am trying to install the new version of MSN Messenger (2011), but to do that, I need to install first the platform update for Windows Vista and everytime I try to do, I get an error message and I can't finish.

  A program on your computer interfered with the installation

  What application anti-virus or security suite is installed and your current subscription?

  What anti-malware software can be installed.

  Just out of curiosity you use SpyBot Search and Destroy? Resident Tea Timer of Spybot is & she always enabled?

  0X8007000D ERROR_INVALID_DATA

  Description

  These data are incorrect.

  Description of the update of the system for Windows Vista tool

  http://support.Microsoft.com/kb/947821>

  0R

  Launch a collateral request for assistance free Windows Update:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  04/16 / 1107:05: 42 pm

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• Is windows update causes the failure of the system?

  I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

  No, do not keep your computer fully patched all the time causes more problems.

  4 steps to protect your computer
  http://www.Microsoft.com/security/pypc.aspx

  NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

  The above has applied to WinXP SP1 computer your aunt since October 2006.

  For you and your aunt...

  HOW to get a computer WinXP SP1 or SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner