failure of the test spindle error wcd-44-rm5

Similar Questions

• Equium A210 - HARD - failure of the SMART disk error

  I get this message on my lap top

  Planned SMART failure hard disk 4: hitachi-(s1)

  WARNING: Immediately back up your data and replace your hard drive. A failure may be imminent

  Press F1 to continue

  If I press F1

  ... it is thinking...

  Error loading operating system it can all go off after a few minutes, so now another attempt, I press CTRL ALT and delete

  Try to start again and I get

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  Operating system not found

  My questions are:

  How should I do?
  I will lose everything on my laptop, for example pictures etc?

  I'm not computer literate, don't know anything about this... Please help

  Hello

  To me, it seems that your HARD drive is dead.
  SMART stands for self-monitoring, analysis and Reporting technical and it s a feature that reports errors with your HARD drive.

  The error is clear to me; a fault has been detected on the HARD drive.
  Now, the laptop can not boot into the Windows operating system because the operating system is not found. Why? Because the HARD drive seems to be dead.

  In my view only new HARD drive could help!

  Good bye

• How to solve - LIBTUX_CAT:4053: ERROR: failure of the routing function - error?

  Hello
  
  We use TUX 8.1 and I get the error:
  
  LIBTUX_CAT:4053: ERROR: function of routing failed
  
  citing a tpforward call.
  
  My UBB for the new service is below.
  
  'NewXXInqu '.
  LOAD = 50 PRIO = 50
  BUFTYPE = "ALL".
  ROUTING = 'PARTITION
  TRANTIME = 90
  TRANSCENDING = N
  
  BY DEFAULT: LOAD = 50 PRIO = 50 BUFTYPE = 'ALL' TRANSCENDING = N
  * ROUTING
  'PARTITION
  FIELD = "ID_PARTITION."
  BUFTYPE = "FML32.
  WILL = «1:P1, 2:P2»
  
  Sound also to give the error: GP_CAT:1064: ERROR: field 'NewXXInqu' null routing
  LIBTUX_CAT:1401: WARN: failure of tpacall tpforward TPESYSTEM - internal system error
  
  I have the file object created NewXXInqu, which is related to NewXXSvr. This NewXXSvr server is up and running and I can see that using ps - ef.
  
  can you please tell me what is missing this im here. What does routing field null 'xx' mean?
  
  Even if I call my new service directly, it gives the same error: GP_CAT:1064: ERROR: routing field for 'xxx' null.
  LIBTUX_CAT:4053: ERROR: function of routing failed.
  
  Appreciate your response,
  Thank you
  Gopi.

  Hey Gopi,

  The routing criterion you set requires that the being sent to the FML32 buffer must contain field id_partition. If it does not contain this field, Tuxedo does not know how to route the request. You could add a routing by default for the routing criterion, but I suspect that will hide just everything that is the real problem. As I mentioned in response to your other post, try to print on with Fprint32() FML32 buffer before calling the service and checking that the field is present.

  Another thought, since it occurs in a TPFORWARD application, make sure that the server that makes the TPFORWARD has access to the field table that defines the id_partition. If the transfer server does not well-positioned FML32 field table environment variables, Tuxedo cannot find PARTION_ID to determine if the field is present in the buffer or not.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Failure of the Back Up - error code 0 x 80070020

  At the request of continuous automatic backup fails with the message "the process cannot access the file because it is being used by another process" and citing the error code 0 x 80070020. This problem seems to have arisen since downloading and installing Windows 7 Service Pack for 64-bit systems, 01/03/11 successfully.

  How can I solve this problem?

  Hi Robin,

  I had the same problem with the backup, Halima solution of unchecking newly created users of the suite, the operation failed for me as well. My solution was to go into the settings, by clicking on each of my users to show their files and unchecked the AppData folders for all of my users. I was then able to run my back upwards with success. I hope you find it useful.

  Good luck

  Mark

• BlackBerry Smartphones dead phone after the failure of the update software - error symbol

  I've updated my BB device software, but the process of update froze at the end when the device is supposed to initialze. Now, when I turn on the phone, all I get is an error of symbol that resembles the cross symbol with the number 543 under application. When I plug in the USB cable, the computer recognizes the phone and the Manager believes he is as well, however I can not connect to the device.

  Need urgent help!

  Thank you.

  Thank you!

  Solved using the JL Cmd wiper.

  Lars

• error of hard disk failure, disk hard test result 0301, whatever that means?

  HP Envy 17 17-1190 ca,.
  Windows 7 64 bit
  Failure of HARD drive in windows error.
  Error reads:
  Windows detected a hard disk problem
  Back up files etc...
  -> Start the backup process

  -> Ask later
  Which drive is a failure

  The following hard disks are fault condition:

  Disc name: Toshiba Mk1059GSM
  Volume: C:\D:\

  No major change except the recorded images and visit the different websites before this error occurred. Use different Wifi access than usual the night before that I was visiting a friend.
  I also did the backup under windows has proposed, as well as fact the HARD drive to test on a restart with the following information
  Journal of diagnosis
  Result time
  111411 0301-072937

  0301 111311 190805

  Then several no data below.

  What are these results? This could be a virus and not a real failure of HARD drive?

  I made a backup at this stage, and then the AVG installed anti-virus software to carry out analyses more away in case it's a virus.
  Help to identify the journal of diagnosis would be appreciated and so also if it is a virus, as I had seen a virus who himself disguised as a warning from Windows XP HARD drive failure which linked to a Web site to try to extort money from people (although none like this, but a real Windows 7 error)

  Thanks for any help.

  Hello

  You are welcome

  All the best,

  DP - K

• Muse throws me an error message: an error has been detected and will close. Failure of the assertion in the file: MuseDOMFontProvider.cpp. How can I fix it?

  Please help me.

  Argh.

  This error message occurs when a specific font will not load. This particular font comes with Muse and is only used within the user interface of Muse. It does not appear in the font menu. The call to Windows to install the fonts that are used only by the Muse is a failure and that causes this error. The fonts are stored in the files shown in your screenshot of the file resources. These files are good names and sizes, so the police files seem to have been correctly installed. The fact that you were able to uninstall and reinstall without reporting errors makes very little likely, there is no problem with the permissions on these files settings.

  The few reports we got this error are all customers who use Windows 10. All but one have been using Spanish Windows 10. The other used Italian. Two clients reported the problem being solved by turning on Windows Firewall. It seems extremely unlikely there is a direct relationship between turning on Windows Firewall and what are default load. However, it is possible that turning on Windows Firewall included turn off any other anti-virus/anti-malware providing another firewall and it is at least theoretically possible such software could choose to stop an application to load a font for application-specific use (although I have no idea why there would be a reason to prevent this).

  Please be 100% certain that you tried the path off completely from all anti-virus/anti-malware software and the non-Microsoft Firewall software you have and that you enable the Windows Firewall. If that does not always avoid the error, then I would ask you to consider joining the beta program Adobe Muse to allow us to provide you with special versions of Muse to try to isolate further the cause of this failure.

  Adobe Muse beta program is open to all current subscribers to Muse who can accept the terms of the non-disclosure agreement. You can join the http://museprerelease.com>.

  The current construction of prerelease will launch on your computer, because we have modified the code to ignore this error. However, the current beta builds are not at a level of quality that should be used for production activities and the fact loading of application-specific policies apparently does not work on your computer can prevent fonts Typekit Web is used. Installing a beta version (side-by-side with the 2015.0 version) is not a solution. It would be just a way to try some additional tests that could provide new information about the failure and therefore perhaps refine the root cause.

• failure of migration on wifi. error message. programs do not work. anyone else having the same problems?

  failure of migration on wifi. error message: migration quit unexpectedly. Apparently, the migration is yet complete, but with a lot of mistakes. many programs on the new computer do not work. anyone else having the same problems? never had any problems with apple before. Maybe it's my last mac.

  Migration via wifi is a bad choice, physically connect the two PCs with an ethernet cable is the best solution. Start the computer in recovery (command-R) and erase the boot partition. Then reinstall Mac OS X and migrate again using ethernet. Some programs such as MS Office may still have a problem and need to be reinstalled.

• Satellite A500 - HDMI never knit - error don't pass the test regza

  Hi mate,

  I come from Italy and, first of all, I want to apologize for my English... ^ ^
  I'll try to explain my problem:

  Whenever I try to connect to my Pc to my TV by HDMI port "Satellite A500'... an error pops up:

  _The tv is turned off or in standby or does not pass the test regza... _

  What it means?
  What can I do?

  Thank you

  concerning

  Hello

  As I know some of the Toshiba LCD TVs supports binding Regaza.
  This feature allows you to control the device (laptop, LCD monitor, etc.) using only a single remote control.
  But this only works if all devices support the link Regaza.

  If one of the devices (LCD or laptop) doesn t supports the link Regaze then you will probably get an this error message.

  Of course, you can disable this feature as well.
  I m not very well, but you should check the Toshiba applications preinstalled on your laptop (Toshiba assist, etc.). In addition, you should consult your manual for more details

• passed the test after the step failure

  Hello

  I have a stage with test of numerical limit.

  I checked in properties, under run Options, step failure causes the sequence

  But when I washed up on the market, the result of the test is passed.

  When I change the Actions Post - on is not going to the next step Goto cleanup

  then the result of the test is failed.

  I have two other stations where I limited digital test with the same properties, but here I don't have to go to cleanup for a failure result.

  I use TestStand 2013.

  Please help me, thanks

  / Magnus

  Magnus,

  Instead of setting RunState.SequenceFailed in your Expression after, try setting Step.Result.Status to this value instead. It worked on my machine.

  I hope that helps!

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• What is PXE - 61 media test failed error and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop

  I have a lenovo computer. I began as routine but unfortunately it says error:-what is media test failed error PXE - 61 and the error PXE - MOF? What is the solution for this error? It's a lenovo with windows desktop computer? How do I prevent this.

  Kala

  Hello Mohan,

  ·         You did changes to the computer before the show?

  These errors often occur if there are incorrect BIOS (Basic Input\Output System) settings.

  Method 1: Check if the computer startup options are changed in the BIOS. You can set the hard drive as the first boot device. In addition, make sure that this option "Wake on LAN" or one similar to it is off.

  Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer.

   

  Important : Change/update BIOS can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• E-mail permission denied error during the test the pin of e-mail

  I got this code example of a forum and I wanted to test it.

  But I get an error message stating that "permission denied by e-mail '

   

  What is the source of this problem? And where I went wrong?

  public class MyApp extends UiApplication
  {
      /**
       * Entry point for application
       * @param args Command line arguments (not used)
       */
      public static void main(String[] args)
      {
          MyApp theApp = new MyApp();
          theApp.enterEventDispatcher();
      }
  
      /**
       * Creates a new MyApp object
       */
      public MyApp()
      {
          // Push a screen onto the UI stack for rendering.
          System.out.println("Into the main screen java class");
          Store store = Session.getDefaultInstance().getStore();
          //retrieve the sent folder
          Folder[] folders = store.list(Folder.SENT);
          Folder sentfolder = folders[0];
          //create a new message and store it in the sent Folder
          Message msg = new Message(sentfolder);
          PINAddress recipients[] = new PINAddress[1];
          try{
              int pin = DeviceInfo.getDeviceId();
              String s = Integer.toHexString(pin);
              recipients[0]= new PINAddress(s, DeviceInfo.getDeviceName());
          }catch (AddressException ae){
              System.err.println(ae);
          }
          try{     //add the recipient list to the message
              msg.addRecipients(Message.RecipientType.TO, recipients);
              //set a subject for the message
              msg.setSubject("Test pin message");
              //sets the body of the message
              msg.setContent("This the Test pin message content");
              //send the message
              Transport.send(msg);
          //  Dialog.alert("Message sent successfully");
              }catch (MessagingException me){
                  System.err.println(me);
              }    }
  }
  

  You must register with RIM for signing of the code, which is free.

  http://us.BlackBerry.com/developers/javaappdev/codekeys.jsp

• Failure of the load of the inventory... OPatch failed to load the inventory for the Home.OPatch Oracle data failed with the error code = 73

  Hello

  I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.

  It ended to give details below.

  Citing O 11.2 patch .0.1.1

  OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt

  **ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)

  Setup Oracle interim Patch version 11.2.0.1.1

  Copyright (c) 2009, Oracle Corporation.  All rights reserved.

  OPatch could open the log file, the recording is not possible

  Home Oracle: *.

  Inventory Center: C:\Program Files\Oracle\Inventory

  from: n/a

  OPatch version: 11.2.0.1.1

  YES version: 11.2.0.2.0

  YES location: * ORACLE_HOME * \oui

  Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log

  History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt

  Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.

  LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.

  09_16-27 - 49 PM .txt

  OPatch failed with error code = 73

  Can someone please help me solve this problem?

  Do I need to install the last opatch utility?

  Hello

  This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .

  09_16-27 - 49 PM .txt "

  indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch

  Check the owner of this file system.

  Kind regards