failure of the update of the software iPad 2

Similar Questions

• Failure of the software update, try to disable to load but it lights again and again

  Hello, I installed Lollipop but PC Companion insist an update exists I was completed by a faulty update of software startup message, my mistake was trying to update with the battery with 65% of the load. And don't remember not what happens, but I'm done with the software update failed error and the phone switch works and market with the same message, I read the other post about turn off and load, but I turn off with the little red button to force it, but if I connect the magnetic cable or usb cable to power it on again , I force to turn off and and the phone turns on again (with the message update failed). It is this normal? I left more time on the phone like that but "load", this will dry the battery? What do I do? Thank you

  Try a system repair using PC Companion as this will often fix questions - this will be factory reset your phone and erase all data

  Turn off your phone and unplug the PC (Hold to increase the volume and power for 10 seconds)
  Start PC Companion and select the area of support then updated my phone/Tablet then blue fix my phone/Tablet and follow the instructions on the screen - when prompted connect your phone turned off always press and hold volume or back button - this should begin the process of repair or reformatting

  If you use Windows 8/8.1 or a 64-bit operating system and then adjust the settings for PC Companion and run in compatibility mode and choose Windows 7 or XP

• My iPad air2 will not charge after the software update

  My iPad air2 will load after 30 per cent since the software update. The software says that it is up-to-date (10.01). Nobody knows how to solve this problem, until Apple makes in the next update?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see the apple logo

  It may take 30 seconds

  See you soon

  Brian

• In the air of my ipad 2, ios 9.2.1 is not download. An error saying cannot check the software update is coming

  My current operating system ios 9.1, the latest operating system (ios 9.2) is not upgraded. A mistake is to come indicating that, "unable to verify the software update. I tried to update during the loading of the ipad, but no result. Please help me.

  HAbe you never synced to a computer?  You are able to update via iTunes on your computer? If so, try this way. Sometimes, it has fewer problems than to try to live update

• I've updated to the latest version of the software iOS overnight last night and now I can't access email on my iPad mini or Safari. When I go into the settings, click the software update that is displayed simply endless turns.

  I've updated to the latest version of the software iOS overnight last night and now I can't access email on my iPad mini or Safari. When I go into settings, a notice is displayed under the general rubric that there is 1 available software update, but when I click on the link for the software update, it runs just endlessly. I am not able to connect to the WiFi (nothing happens when I click on the WiFi button). Did not have this kind of problem before. Thanks for any idea.

  Hello

  Try a reboot press & hold the power button / stop & menu button

  Hold the two for up to 30 seconds until you see the apple logo.

  Then try update on your WiFi

  See you soon

  Brian

• iPad 2 isn't getting new update (iOS 10). says "the software is up-to-date 9.3.5.

  I've already updated my iPhone and iPad mini and wanted to update the old. the wire air did not work, so I plugged it to the itunes (updated new version yestarday) also says there is no update.

  iOS 10 is not available for the iPad 2

• When you try to update the latest version of the software my ipad is locked with Update verification

  I tried to download the latest version of the software and received a message on the screen that says 'verifying update' and now I can't do anything. Screen is locked with the message "check update" and I can't even turn off the machine

  Force the restart: press home and locking the buttons for 1 minute, releasing when the Apple logo appeared.

• After the update 42, partial load in memory (Task Manager), but the software antivirus keeps thread bound to perform but only loads 2nd & subsequent.

  Manager tasks shows Firefox loaded as a service, but a of threads waiting to complete. There is no application shown in the Task Manager (which seems reasonable that Firefox has not loaded).
  There is no error message. The 'circle of rotation of microsoft"is going for a few seconds, then disappears as if the schedule.
  It happens after 2nd & subsequent charges after reboot. Firefox seems to work the first time after reboot. It happened only after upgrade to 42. Clean installation makes no difference. Chrome works OK
  Worked well up until the 42 update. Tried to do a clean install with the box to inform Mozilla erased.
  Maybe Firefox started using a port that is blocked by the antivirus? I don't get no logging for the virus scanner showing what it to be blocked. A comprehensive analysis reveals nothing.
  Operating system is Windows 10 (64-bit)

  Abandoned trying to actually find what is actually happening. Changed software virus scanner.
  I think (and this is just a guess) is that to integrate with windows update update 42 change the output method to the telemetry file the antivirus does not. It is perhaps that the antivirus cannot manage that file or property, but it does not record the fact, a failure of the antivirus.
  There is a hint of doubt in my mind when an upgrade causes a system that works to fail in a non traceable method.

• I bought an iPad mini4 specifically for use with a pro Phanton3 drone. It will NOT connect the remote control with the drone. They say it's a problem of software iPad mini 4 9.3.3. How can I remove and reload it.

  How can I uninstall 9.3.3 an mini iPad iOS 4 and reinstall? I bought it specifically for a ghost Pro 3 drone, and it does not work with the drone. Someone had luck with uninstalling/reinstalling. At this point, I lost a LOT of money.

  Apple frowns on a decline in the ratings.

  While Apple allows, try downgrading to 9.3.2.

  For a limited time Apple will return you to the previous version.  Do not hurry.  This period takes up to a week.

  See brownox second post here:
  https://discussions.Apple.com/thread/6545455
  and
  http://www.GottaBeMobile.com/2014/09/17/downgrade-iOS-8-to-iOS-7/

  see which versions are allowed:
  http://API.ineal.me/TSS/status

  --------------------------------------------------------------

  See the arizonacat post and others on this topic.

  https://discussions.Apple.com/thread/5337442?TSTART=0

  arizonacat notes these sites:

  • Allows easy access to the files in the Apple firmware.
    http://www.ipswdownloader.com/
  • How to install the ios software.  The installation will erase your outgoing data. Back up your existing data.
    http://osxdaily.com/2010/11/23/how-to-use-ipsw-files/

  --------------------------------------------------------------

  See the second procedure in reloading the software from scratch.

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• Disable the software updates

  How can I disable software updates for my devices.  After the fiasco of the last with 9.3, I refuse to update to the most.  I was on the phone with Apple customer for 2 hours after 9.3 locked my phone and Apple had no idea to solve the problem.  It was entirely due to verification of 2 point added for security.  He was so sure that I can't use my own phone.  Apparently, I canceled the audit of 2 article, which in turn wiped all my devices - Mac, iPhone, iPad iCloud data.  Now that's security.

  APPARENTLY, cancel checking the 2 story did not work either!  I had to use it to get the boards, and I need to have 2 devices that I can get the code.  The apple code sends disappears when you return to the screen to enter.

  < published by host >

  If I remember correctly (and it was some time ago), to 'disable the software updates' simply tap "not now" or "Remind Me later" (or other) option when the update dialog box software iOS appears.  After doing this 3 or 4 times, you should stop doing the guests.  Then delete the update of iOS in the list:

  Settings > general > storage & use iCloud > manage storage (in STOCK)

  If you wish.  I'm not saying that I recommend doing that, just answer the question.  I think a more prudish approach is to wait a week or two and see (from this forum, for example) If users have problems with a particular software update.  Then make the decision on that basis.

• DirectX/Sound error code 0x00000000; failure at step 19 (verification of the user of the software)

  No sound in certain programs, or barely a sound, setting volume/updated driver does not help, he went to directx sound, got the following text in the section notes. Failure at step 19 (verification of the user of the software) HResult = 0 x 00000000 (error code). Audio device; SoundMAX Integrated Digital Audio. Windows XP Home Edition; SP3. All solutions?

  Sorry, but nothing to do with video drivers! Re install the audio drivers. ETN also make sure you download and install the latest version of DirectX.

  See you soon,.

  Jerry

• Failure of the update of the virus definitions and spyware

  My machine will not update the definitions of viruses and spyware. It maintains error 0 x 80070424 report.

  I get this error reported:

  Failure of the update of the virus definitions and spyware

  Security Essentials might not check for viruses and software spies definition updates following a network connectivity problem or the internet.

  Security Essentials could not install the definition due to updates

  Hi GlennRogers,
   
  Here are a few articles related to this topic. Try the suggestion given in the statutes for this problem:
   
  How to troubleshoot Windows Defender definition update
   
  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
   
  Here's a direct link to troubleshooting automated for this question:
  https://support.microsoftsecurityessentials.com/default.aspx?&St=1&wfxredirect=1

• The software update failed!

  Hello

  I received a notice received yesterday on my sony Xperia Z3, request an update by using Sony PC Companion, I did it and then he said that a network problem occurred, and from there, when I try to power the phone it says "echec failure of the update of the software, make sure that the phone is connected to the computer and try again."

  I tried the "power button / stop + volume up" when loading, the phone has started feeding and turns off all the time and after an hour it's been really hot! I was so afraid, so I unplugged it. One moment, I ran out of solutions.

  Please tell me I lose my Z3 1 month already, please.

  You may need to perform a repair of software using PC companion. The process will erase all internal memory. You might need to charge your device for about 1 to 2 hours until the device has so at least 60% battery.

  Make sure that the device is not connected to the computer or laptop and turned off (sometimes you have to press the power button / stop and volume until what the machine vibrates 3 times or on some devices, it must push the small button near the tray on the back of the camera or SIM).

  Open PC companion-> support area-> update phone software / Tablet-> repair my phone/Tablet blue highlighted. Follow the steps, do not plug your phone until you are prompted to press volume down while plugging in the USB cable. If PC companion does not start the repair process, you may need to run Windows 7 compatibility mode (in some cases XP).

• Frozen to the software update blackBerry smartphones

  I have a Blackberry Curve 9360 and it is frozen all by doing an update of the software (progress overall backup 13%).  It has been like that for the last two hours.  I tried to take out the battery, but it just goes back to the same screen when it restarts.

  Can anyone help please?

  Two options to try:

  One:

  • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
  • You have three Retry option, update or cancel, and then click Update.
  • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
  • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

  Second:

  • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877
  • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
  • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
  • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
  • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

• Can not install the app on iPad because of the new iPad software (?)

  Hi, we have created a portfolio using InDesign CC and built the app with the DPS App Builder Version 2.9.0 which we updated January 13, 2014.

  We have created an App ID for this app and created and used the mobileprovision developer and the mobileprovision of Distribution that we generated for this application. We also made sure that the these included mobileprovisions the features that we wanted to test the app in. We were then able to create the file API, which has been placed on the desktop.

  The problem is that we cannot test the app in our iPad, even if we created a similar application and tested on our iPad last year.  Whenever we add the ipa/app library via iTunes, he always says "app [insert the app name] was not installed on the iPad [insert the name iPad] because it requires a newer version of the software for the iPad."

  The software of the iPad we have is iOS version 5.1.1 and it is said that the iPad software is up-to-date. The model is also MB294LL (if this is useful at all). I guess this is one of the earlier iPads, otherwise one earlier. Also our Digital Publishing Suite is the only edition.

  Issues related to the:

  (1) is the reason why I can't put the ipa file in iPad because we used a newer version of the DPS App Builder?

  (2) was the most compatible with the iPad version of year last Builder App DPS?

  (3) if so, is there a way to create the application that will make it compatible with the old and the new iPad? Still using the new version of the DPS App Builder (Version 2.9.0) and the unique edition of DPS.

  (4) once again, if this is the case, what the iPad software is more compatible with the DPS App Builder Version 2.9.0?

  Any response will be a great help.

  DPS supports most iOS 5. You must have a device running iOS 6 or later.

  Neil