Failure of the Windows Launcher

Similar Questions

• Win XP failure of the Windows operating system, making Noah begins.

  Hello everyone,

  My computer got an operating system failure, this morning, I can't do to start windows. System is win XP. Recently, I installed a new terabyte of hard drive as secondary. I need some advice also, the main hard drive, I had (were I got the operating system) is 250Gig only and I wanted to install Battlefield Bad Company 2 on the new terabyte of hard drive and use the 250gig for purposes of Os only, this may be the reason for the failure of the system? launch the game from the secondary hard drive?

  How can I fix? I would greatly appreciate any help you guys can provide and advice. (Note that this has happened to me before) and I had to reformat etc, and get a new terabyte cause it damaged (what im using is a new replacement).

  Windows my computer is windows 98 with a win XP upgrade...: S

  It is a Forum of Vista.  Please repost your question in the Forums XP: http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where XP experts will be more than happy to help you with your problems.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After that a failure of the windows updated my computer will not normally - close Windows 7 home premium 64-bit

  Sunday 20 Dec I tried to install an update from windows for a Western Digital network drive driver. He failed with the error code 800705 b 4 and since then the computer refuses to shut down normally - it is only possible by the dreaded button! I tried to perform a system restore, but this also fails. even in safe mode.
  Even if the installation failed - the properties of the drive to show that this is the pilot that he wanted to install - WD (hard drive) 28/09/2009 1.00.0002.
  I contacted WD who say that I am under W7 and it is not supported, they cannot help me.
  Please help - the only reason why I'm on W7 is that the graphics card of my faithful XP melted (a laptop) machine

  At this point, I think you'd be better to ask for help in this forum instead, Michael: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads

  Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failure of the Windows Configuration when performing disk recovery system.

  I have a HP Pavilion model: A6838F product number: NC839AA #ABA, Serial #{removed privacy}, BIOS: V5.36 12/01/09

  The drive has been recently replaced by a 750 GB Hitachi PN. 0F131179, SN. 5V06D3ZL

  750 GB MLC:MRS5Q0 FW:5 Q 0 LBA:1.465.149.168 sectors CHS: 16383/16/63

  New recovery discs were recently acquired by HP PN. 530238-001 build ID: 92NAv6PrA2, which corresponds to the identifier of the version on the sticker at the bottom of the CPU.

  The recovery disks starts as expected and ran through all three discs and ask to remove then restarted the system and continued the installation. Everything seemed to work as expected until the part of the process where it indicates that the process is to configure windows for my computer - "Please wait while windows configures your computer." follow-up by "end of installing windows... installation." and so on...

  After a while, the system displays a window indicating "Installation of Windows could not configure windows to run on this hardware of computers". It seems that the system is built almost and you have to configure windows, but he can't. Attempts to start the drive puts me in the loop where the system tries to configure Windows and fails.

  I need help on this last hurdle. Suggestions?

  After a lot of trial, tribulation and persistence, I found the solution to this problem. Hope it helps shorten the process of troubleshooting for someone else.

  The answer lies in the following MSDN article:

  Article ID: 2466753 - last review: January 20, 2012 - revision: 3.0

  http://support.Microsoft.com/kb/2466753

  Download driver Intel can be found here:
  http://www.Intel.com/support/chipsets/IMSM/sb/CS-031502.htm

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=20625&ProductFamily=chipsets&ProductLine=chipset+software&ProductProduct=Intel%C2%AE+rapid+storage+technology&lang=eng

• Muse of blocks - Where is the Love? Failures of the app launching & database errors

  I really love Adobe Muse but I'm really frustrated by its instability.

  There are two general issues that I still feel.

  Launch of application issues

  First of all, and is a problem that I feel at this moment, a launch error where the program refuses to open and display an error message then crashes immediately.

  Today's message is:

  

  Someone has experienced this before or have a solution? I'm tired of signing in and out creative clouds and uninstall then reinstall Adobe Muse and same problem.
  

  
  

  Errors in the data / backup file errors

  I can usually wait a muse, save the file to become unusable for some sort of error of random database totally ruin my save file to me to have to take back to one, I already saved. Like the wii brought loading time in a serious way that adobe Muse brings incremental return record we WOULD abandon all practices.

  Why it sucks

  I don't do web development high-end, but I offer basic sites to customers with simple needs and I find Muse a delicious product given my skills and base in photoshop.

  Not being able to update sites or launch the application at all is SUPER annoying.

  It certainly justifies NOT using Adobe Muse for complex sites.

  If there is a general approach that I can take to avoid these problems, I'm all eyes and fingers.

  Thank you!

  Hello

  Solution for "incompatibility of Üser ID.

  Please the following steps and you'll be all set.

  1. disconnect Muse by going to help > log out. (if you see the option to do so)

  2 disconnect from the creative Application of cloud. (Steps are mentioned in the link disconnect, sign in |) Creative Office Cloud app), then quit the Application in creative cloud.

  3 Rename the folder "OOBE" to "OOBEold".

  MAC: (This file can be found at Finder > go > go to folder > enter ~/library/application support/Adobe > press return)

  Widows: (This file can be found at C:\Users\\AppData\Local\Adobe )

  4 restart the Muse, sign in with your Adobe ID

  Suggestion for the database error:

  Is the file that is saved on the local or a network drive or a direct external location Dropbox or Google Reader.

  Please move the file to the desktop and then try to save the file after making a few changes. I hope that you will get no error.

  If you get the error please correct the error screenshot part.

  Concerning

  Vivek

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Error in the final launch sequence - 500 failure ' ascii' codec can't decode byte 0xc3 in position 111: ordinal not in range (128)

  Hello

  running an application on a device of Momentis just doesn't work. Here's what I did:

  -downloaded and installed Momentics

  -downloaded and installed 10.2 API level (target device is a Z10)

  -created a new BlackBerry in Momentics application from the simpler model 'Hello World '.

  -a ran deploymend debugging wizard token, installed on the device

  -device is connected via USB, Momentics shows me a green light to the USB

  -Click on 'run '.

  The build process works very well, and then wake up the unit (so something's happening on the device), then Momentics fails with the following message is displayed:

  ---

  Error in the final launch sequence

  Impossible to prepare and upload the binary file

  result::Failure 500 'ascii' codec can't decode byte 0xc3 in position 111: ordinal not in range (128)

  ---

  I tried this on a Windows computer as follows:

  -Win 7

  -Momentics 2.1.1 build 201411071638

  -target Z10 with OS 10.2.2.984 device

  And I tried it also on a Mac with the latest Mac OS and Momentics newest and the same device. With exactly the same result and same error message.

  I made sure that the architecture is set to 'activation' in the run configuration.

  I am a bit confused what I did wrong because I just downloaded the IDE, SDK, connected to the device, installed the debugging token (the device is in developer mode) and try to run an application. It really should work, no?

  The problem is resolved. The cause was an umlaut in the name of the author in the certicate used by the debugging token.

  See https://www.blackberry.com/jira/browse/BBTEN-2754?page=com.atlassian.jira.plugin.system.issuetabpane... for more details.

• Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

  OP: Action Center... PC problem: 1 important message

  After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

  Hello Irfan,

  Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate.  Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me.  On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers.  Not the only one, I have is the product key which is one 25-alpha-numeric.  I tried to enter only and does not pass.  This is why I say that I can pay for help since I did not ' have the product ID.  Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think?  If you can get back on track, I would be very grateful and thank you once again to be a big help!

  wandrinstar

  Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

  Keep up the good work,

  wandrinstar

• Is windows update causes the failure of the system?

  I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

  No, do not keep your computer fully patched all the time causes more problems.

  4 steps to protect your computer
  http://www.Microsoft.com/security/pypc.aspx

  NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

  The above has applied to WinXP SP1 computer your aunt since October 2006.

  For you and your aunt...

  HOW to get a computer WinXP SP1 or SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

  I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

  Hi Bobby Collas,.
   
  You must have a copy of the installation CD without which you can not re - install the OS again.
   
  If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.
   

• can not find the window Task Launcher options

  can not find the window Task Launcher options

  If you are referring to the Microsoft Word Task Launcher, in, click on the menu _ Word file > then click 'new '.... ». The Task Launcher is displayed on the right.

• Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  How do I rebuild the icon Cache in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• Do not click on & dray of desktop icons to the quick launch with Windows Vista.

  Evening... Maybe someone can help me with the problem, I'm going to not be able to click & drag one of my desktop for the quick launch icons.  It's on my husbands laptop (mine is fine), so I don't know how long it lasts.  Any suggestion would be appreciated.  Thank you and have a great rest of the weekend.

  Hello
   
  Are you connected to this main computer as ADMINISTRATOR?

  Maybe her husband, he is the lead director.

  I hope this helps.

   

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner