Failure of Windows Vista and the SafeMode of startup failure - crcdisk.sys

Hello

I have a Dell Inspiron laptop computer 2 GB RAM. He had a few months now, and everything has been fine.

Started a few days ago from freezing occasionally so I was forced to restart. CTRL + ALT + DELETE has refused to do anything and so I had to manually remove the battery.

A frozen about three times and then once rebooted showed the BSOD saying something the system failure.

So I rebooted once more and now it restarts just without going on the login screen. I tried to run in safe mode, but it gets stuck on crcdisk.sys or goes in an endless process to restart again.

Is there anyway that I might be able to get back on without doing a full factory reset, as I have all my work stored on the hard drive integrated without backup.

I can open the system recovery options, but none of these options seem to work. All my points of recovery have been removed.

Startup Repair doesn't indicate a problem with the system, so I thought maybe it was a virus? The same thing happened to my wife a few days ago computer and that uses the same Wifi network as me.

Jacob.

To search for malicious software, you must do in Mode safe mode with networking, but you say that you can not get the Options.

There is information below data recovery.

And Startup Repair Info, too.

Data recovery:

1. slave of your hard drive in another computer and read/save your data out there.

2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

3 Alternatively, use Knoppix Live CD to recover data:

http://www.Knopper.NET/Knoppix/index-en.html

Download/save the file Knoppix Live CD ISO above.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://isorecorder.alexfeinman.com/isorecorder.htm

Download the Vista software from the link above.

After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.

Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

Click on the icons of hard drive to open and to understand which drive is which.

Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Dell recovery options:

http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

Above is Dell to reinstall Vista from the DVD on your computer.

http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

And that way if you have a recovery partition on your hard drive.

See you soon

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

    Can someone help me? I have a dell windows vista and the cd/dvd drive won't work correctly. Whenever I have insert a cd/dvd, it takes forever to read, and it ejects itself. Why?

    Hello

    Detect and automatically fix problems of CD/DVD
    http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&l=en&s=Gen&docid=56A1F87CD8895B0EE040AE0AB7E15FFC

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • How to reinstall windows when the winows dvd is lost in windows vista and the hard drive is broken

    one of my system is windows vista Professional (OEM version), and the windows dvd is lost. In case of hard drive failure how can I reintall the operating system on my computer (of course after the replacement by a new hard drive).

    Hello

    "and the windows dvd is lost."

    I thought that you had lost the DVD.

    You can reinstall with the recovery DVDs provided with this computer on a replacement for her hard drive.

    If you have problems with this relocation, contact the manufacturer of the computer.

    See you soon.

  • Windows vista and the air combat Simulator series World War II Europe.

    We have home edition of Windows Vista 64-bit, have loaded Microsoft CombatFlight Simulator WWII Euope series while running as "administrator."  No problem with loading.  Have a Logitech extreme 3d pro. In the development of the game, allows to calibrate the joystick very well, but when you go to missions, nothing works.  If you return together to the top, we get message asking if we want to re - calibrate the device and there a lot of symbols not words in the name of the device of the message window. Anyway to get the game to work with the joystick. We also have the Combat Flight simulator 2, Pacific Therater, and the joystick works very well with it.  Any suggestions to get the game to work?

    Hello Debicin,

    Welcome to the Microsoft Answers Forum!

    First of all, I suggest to uninstall and reinstall the drivers of joystick from Device Manager and check if it works very well. To do this, please follow the steps below:

    Click Start > type devmgmt.msc > right click on the joystick device in the list > click on uninstall > then restart the computer.

    You can also check out the link on how to troubleshoot the problems of gamepad on Combat Flight Simulator 3 (battle for Europe) and follow the steps to check if it helps solve the problem below.

    http://support.Microsoft.com/kb/811463

    I hope this information helps. Please get back to us if you have any other questions on this subject.

    Thanks and greetings
    Mir - Microsoft Answers Support Engineer
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

  • I HAVE WINDOWS VISTA AND THE SIMS 2 ON MY COMPUTER BUT I TRIED TO INSTALL THE SIMS 3 BUT NOTHING HAPPENED! (CAN YOU BE RETURNED AS SOON AS POSSIBLE!)

    I INSTALLED THE SIMS 2 DELUX, SIMS 3 PETS AND SIMS 2 APARTMENT LIFE. I GOT SIMS 3 PUT HIM IN THE HARDRIVE HE RAN, BUT THE MESSAGE GAME NEVER TO SAY IF I WANT TO RUN IT HELP! PLEASE

    P.S. I HAVE WINDOWS VISTA

    THANKS X

    Welcome to the Microsoft Answers site.

    Well first thing to note - if you have Windows Vista, it is a forum for Windows 7, then you might have more luck in the Vista forum.  But second, you noted that you have installed the SIMS 2 Deluxe and the Sims 2 Apartment life and the SIMS 3 pets.  There are no SIMS 3 pets yet (only SIMS 2 Pets).  So who could have thrown people.

    So now REALLY tell you putting a SIMS 3 disc in?  If so, you must install the program first and sometimes automatic execution does.  You can, however, open a Windows Explorer (press the Windows key, key with the Windows Logo on it, down and self-tapping letter E - keep the E or you'll have a whole bunch of windows to the top).

    Then go to your CD/DVD drive and double-click it.  It can start the car then run.  If not, then you can right click on the drive icon and select EXPLORER and then find the file named SETUP.  If you don't see what he, or see the files, then make sure you have a valid PC version of the game and do not have a MAC version (my kids have committed this error several times while getting the library software).

    See if none of this helps and then after return. Bob Larson Access MVP

  • How to eliminate the double printing using Windows Vista and the printing of a brother, all-in-One Printer, MFC 490CW wireless configuratrion?

    Example:

    NNooww iiss tthhee ttiimmee ggoooodd mmeenn ttoo ccoommee ttoo tthhee aaiidd ooff tthheeiirr ccoouunnttrryy aallll ffoorr...

    Print appears as above, except that the spacing between the characters seem to be a space of 1/2 rather than a complete space.

    Thank you

    Hello
    • When you try to print?
    • What were the changes made before the show?
    • How long have you been faced with this problem?
    You can view these methods:
     
    Method 1:
    I suggest you to check the print preview .
     
    Method 2:
    Uninstall the driver and the printer software:
    1. open devices and printers, click the Start button, and then on the start menu, click devices and printers.
    2 - Click on the printer you want to remove, click on remove the device and then click Yes.
    If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    3. click on the properties of high print server of the screen and select the tab drivers, under delete evyrhing is installed as a printer except the xps document writer and send a note to the driver package.
     
    Step 2.
    Install the printer.
    Now reinstall the printer, refer to the article below to install a printer.
    Install a printer
    http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers
  • I can't open the pictures and need help please with my Windows Vista and the WindowsLivePhotogallery error Code: 0x8007007e. Carole

    I have a Windows Vista laptop with many pictures.  I can not open the photos on my Windows Live Photo gallery and have received

    Error code: 0x8007007e.

    How this can be solved?

    Thank you.  Carole

    This forum is for Microsoft Security Essentials.

    Please go to the Windows Live forum to get help.

    http://windowslivehelp.com/

  • Windows vista and the problem with the window updates more computer or mouse freezes

    I have window vista system.

    Impossible to update versions of window

    mouse/computer frequent freezing problem

    have installed McAfee total protection

    Hi DilipAssar,

    ·         What happens when you try to run windows update?

    ·         You receive an error message/code?

    ·         Did you the latest changes on the computer?

    ·         How long have you been experiencing this problem?

    ·         What exactly is the computer or the mouse gel?

    Search for the error message for the updates that have failed to be updated.

    To check the update fails, follow the steps:

    Click Start > all programs > windows update > view update history

    I suggest you try the methods mentioned below and check if it helps.

    Method 1: Put the computer in a clean boot State before proceeding with the installation of windows update.

    Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startupmode.

    Method 2: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3: Reset the Windows Update components.

    http://support.Microsoft.com/kb/971058

    You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

    http://www.Microsoft.com/athome/Setup/optimize.aspx

  • Windows Vista and the problems that are

    I'm running Office 2007 Pro in Vista and my programs are useless because of the uniform crashing. I tried to work and it also crashes. Google Earth will crash occasionally. I try running updates on the Microsoft site and it shows 22 update, but none of them don't actaully charge. I ran scans for viruses, but none appear. Help! I think the upgrade to windows 7, but I don't know if that will solve my problem. Why Microsoft does become a free ride with all problems have their software. If it were any other product it would be a Congressional investigation.

    1 RE: consistent crashes

    1. make sure that the computer is virus-free
    Use Malwarebytes:
    choose http://www.malwarebytes.org/ ...
    the free version.

    2 run a file system check to ensure that no
    corrupted files.
    http://www.Vistax64.com/tutorials/66978-system-files-SFC-command.html

    3. optimize performance
    http://support.Microsoft.com/kb/959062

    http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

    2 RE: Has no updates
    Please post this question in the Windows Update forum:
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1

    OR... http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=no

    3 RE: upgrading to Windows 7
    Bad idea! You can easily "carry" the same problems for Win 7.
    This isn't the way to solve problems.

  • I tried to download office 2010. I have windows vista, and the response has been that I need vista spl.

    s above

    What should I do, I'm not finding any solution on microsoft solutions is

    Well, if Vista SP1 is not installed, maybe you should get installed?

  • I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

    I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

    I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

    -Corey

    You need a media player that is compatible with .mp4 files.

    The following preferential ticket should solve your dilemma.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

  • Comparison between Windows Vista and Windows 7

    Hi, can you help me please make a better decision?

    I am faced with a decision to make between windows Vista and the new Windows 7. I am currently using Windows Vista Home Basic (32 bit) that currently gives me a lot of problems. Now I think investing in a newer version of windows.

    Can you please recommend me in terms of:
    1 price
    2. Security
    3. ease of use
    4 reliability
    5. fitness for purpose domestic to small business (Home Office)
    6 connection to a network environment that has other versions of Windows, for example XP
    7. the ability to manage multiple processes simultaneously
    8. the programs that run on windows vista will run on windows 7? I have an accounting program I use so I would like to know if I will not have a problem if I choose windows 7

    I have an offer to buy Windows Vista Ultimate and I want to compare it to Windows 7 Home Premium

    1. Windows 7 is less expensive than Vista, version for version
    2. Windows relies on Vista security
    3. Subjective - if you've never customized XP somehow, you should get good enough with Vista or Win 7
    4. Windows 7 has proved to be reliable in the tests.
    5. Since the release of XP, all Microsoft operating systems are good for the environment
    6. Windows 7 and Vista will be connect to XP
    7. Windows 7 and Vista is better than XP
    8. Generally Yes, but there may be drivers that have been coded to search for a specific operating system. It is a business decision made by the suppliers of hardware and software that allows them to continue to support product as he approaches the end of its product lifecycle, or push the consumer to buy a newly released product

    If you do not require Bitlocker encryption or the ability to connect to a corporate domain, Windows 7 Home Premium is fine to do the job. You must keep in mind that are supported for Vista "home" versions, and that includes 'Ultimate', will end in 2012, where the support of Windows 7 will be ongoing.

    In my opinion, you would be better advised to go to Windows 7 now and miss out on the stage of Vista...

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • Failure of 'pipeline' printing/Windows Vista and HP 5740

    Windows vista and hp office jet 5740: all of a sudden, I get the message of failure to print: PRINT FILTER PIPELINE HOST STOPPED WORKING AND WAS CLOSED.  I do not understand what it is and I tried to find solutions that I CAN understand and have had no luck.  I really need help!

    Open Add/Remove Programs, components windows, chk the boxes for printing... In addition, go to run, or cmd,.

    type: services.msc scroll down to print spooler, double-click it, the value of auto-start...

    A good utility from microsoft's 'print migrator', this utility gives specific information for printers.

  • never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

    never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • installed the game CD Gears of War on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.

    original title: Gears of War for PC (Vista)

    I installed Gears of War game CD on my computer (Windows VISTA) and make me "Please insert the correct DVD - ROM, click OK and restart the application" - but the disk is IN the drive.  I've been on the net and does not know what is the problem and why this game will not run.  I've installed, uninstalled, reinstalled tried to run as administrator, got the latest patch, all the things that have said all sites to do - anyone have any ideas?  Any help would be appreciated!  Thank you!

    Hi NoOneSpeciale,

    It is very possible that your CD may be damaged.  Is it possible to get another copy to try on your machine? Or try this copy on another machine to see if it works or not.
    Also check in control panel--> system--> for you Device Manager make sure that there is no yellow/red icon next to the CD player and it's function correctly.

    Let us know the result, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Driver HP 431 ATI Radeon VGA

    What is the right Driver Hp 431 ATI Radeon? Please share the link emergency!

  • Cannot delete or move e-mail messages in outlook express

    During the 0x800c0133 error code correction process (cannot receive emails), I moved and deleted a lot of emils in my outlook express, using the shift and arrow keys to do a lot at once.  At first it was fine, but suddenly the erase process seems to

  • A malfunction in the Dell keyboard

    Typing with my Dell keyboard the letters scramble wired, fails to separate when hitting key space, fails in many cases to type the letters without the letters and fails to type all the... During the seizure of E-mails, there have been incidents when

  • Video RAM adjustment on Lenovo R61e

    Hi all I have a Lenovo Thinkpad R61e. I installed 2 GB of RAM, and I would like to set up shared video RAM. I know it's automatic, but I would like to first of all he way I want. I looked in my BIOS, and there is no setting to change the video RAM se

  • How vrops generated reports can keep without overwriting

    How vrops generated reports can keep without crushing it? is there a limit?