Failure to configure Windows updates, changes to restore, do not turn off your computer.

Similar Questions

• Update error configuration Windows Updates... Do not turn off your computer. This is immediately followed by the default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer.

  OT: Windows Update failure 8.

  I recently re-installed Windows 8 using an old product key once I updated my PC using Windows 7 due to failure to boot Windows Technical Preview. The installation went smoothly, but when installation is finished, he told me that I had installed updates, for the most updated security. I installed them and restarting my PC, he has said configuration Windows Updates... Do not turn off your computer. It is immediately followed by updates default Windows configuration . Restoration of the changes. Do not turn off your computer. It accomplishes this task for like 10-15 minutes and then finally starts. Once my PC starts, this cycle starts again. So far, happened 4 times.

  Could someone please fix this? I want to update to Windows 8.1, but could end up, I'm stuck with Windows 8. (Also, why download from the store disappeared? "I'm not using a RT system).

  Thank you!

  -me15prg9926

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Error message "failure configuration windows updates, changes in recovery, do not turn off computer.

  I tried to update my laptop with windows updates and an error message "failure windows updates, changes configuration recovery, stop computer" has been there for 20 hours and nothing happens. I can't get rid of this message despite the closure of the laptop for 2 hours and take out the battery. How can I get out of this perpetual loop please?

  I have windows 8.

  [Original title: Windows updates]

  Use any method is needed to access Advanced Startup Options in Windows 8 or 10 including if necessary to the installation media to create for Windows - 8.1 help Windows to start in console repair on the second screen.

  Startup options run the system restore which is the first line of defense and still has a Restore Point before installing the updates.

  If it does not try to repair the startup or as a last resort a refreshment or a Reset.

• Windows Server 2012 R2 Datacenter - "we couldn't complete updates of changes to undo; do not turn off your computer.

  There are approximately 247 updated to do with this Windows Server & as before in the past w / various different OS that I discovered that these must be mounted separately & batch too for these works correctly!

  There must be - a kind of server 2012/r2 cumulative hotfix / service pack that will sort most of these problems of updates w / a download link for getting these!

  But how & in which updates of the batch/grna they do have to do to finish correctly without these issues and so on!

  example"separate updates like this should be done in separate lots and so on!

  (a) Internet Explorer updates

  (b) .NET Framework 4.6

  (c) KB * item updates made in various lots of diferent etc.

  Thanks a lot for your help as it is very much appreciated! A little more the last hours of your answer I had actually beta tested who follows & found that if you keep w / the following it works actually & w/out any error!

  ***************************************

  Windows Server 2012 R2 Datacenter - updates!
  Manually set the updates of Windows Server R2 Datacenter 2012 as follows"
  ' Check for updates but let me choose whether to downloadand install them.
  ***************************************
  (c) Finally,... There are several optional updates to do that must also be separated for installs them!

  1 Microsoft Silverlight (KB3182373)

  6 update to Windows Server 2012 R2

  "(b) s @ less (233) KB * important updates that should be made in separate batches of selected manually - from a @ bottom & goes to the high c as follows.

  119 for Windows Server R2 2012
  98 security Update for Windows Server R2 2012
  1 acumulative Security Update for Internet Explore 11
  1 cumulative reliability for Microsoft .net 4.6
  1 security Update for Microsoft ASP.NET
  13 4.6 .net Framework

  (a) there were several original KB * updates manually, I downloaded & installed directly from the "Microsoft Download Center" w / some which are detailed below.

  1 Windows Server 2012 R2 Update (KB2919355)
  1 update to Windows Server 2012 R2 (KB2883200)

• Error in Windows 8 update 'failure Configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  When I tried to update my PC it showed an error after restarting, "failure Configuring Windows updates. Restoration of the changes. Do not

  Turn off your computer. I tried again after the reboot. Then after reading on some forums, I ran Windows Update diagnosis and these are the errors I got:-
    
  Help, please!
  Thank you

  Hi Rishwajeet,

  Are you able to boot to the desktop?

  If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen.

  I suggest you try all the steps which are names like Windows 8 from following link:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
  http://support.Microsoft.com/kb/949358/en-us

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode. Also when you do the system restore, you will lose data and the programs that are installed on the date you make the system restore.

  Hope the helps of information. If you have questions related to Windows, please do not hesitate to post. We will be happy to help you.

• Try to update, but that out of failure configuring Windows updates. Restoration of the changes. Do not turn off your computer.

  my laptop is s200e asus PC with the built in language unique window 8.

  My problem is when I wan upgrade to 8.1 of the shop window, it say I need to update the update of the window.

  but the problem occurs when I updated, and then "failure of Windows updates. Restoration of the changes. Do not turn off your computer. »

  but the return is seem endless, coz I wait for a whole day... .but it will be not just finish.

  I can do nothing but reset it back to the factory.

  I can't update 8.1 store window without updating the window.

  You do not add features to upgrade 8 > 8.1

  That's the Pro and Media Center that do not need another product key and that are no longer available.

  And the creation of media for 8.1 works; I just checked it a minute ago.

  See you soon.

• Default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer

  Hi, I just refreshed my laptop that I got a few drops FPS at random. Initially, it worked fine, but after a while before instaled Norton started to cause me problems. At this time I uninstalled it and when he asked me to computer restatr now, I did. Now I'm stuck with this message window loading. Restart the computer from time to time, but the message is always the same: failure of configuration of Windows updates. Restoration of the changes. Do not turn off your computer.
  Computer: hp pavilion n006sm
  Operating system: win 8 pre-installed
  At the moment I'm stuck on this window for over an hour and nothing has changed

  Seems that problem solved by itself. As I correctly uninstalled Norton, I just put my automatic updates and restarted my laptop again. He installed the updates with no problem and its working fine. Seems that Norton was really the problem, will keep you informed.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• Default configuration Windows update restore changes do not turn off your computer.

  I'm running 64-bit Windows 8

  Guard saying default configuration of folds by using Windows Update

  Hi Cris,

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to start the computer successfully after following article provided above, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Default configuration of the Windows, restore features changes, do not turn off your computer error/loop - failed to get on the desktop

  Hi, I restored my Toshiba laptop yesterday afternoon, this morning, when I turned it on it started to configure the updates and let him be like that so I made breakfast.

  When I came back, I found this saying ' failure set features Windows restore changes do not turn off your computer ' its been like that for about 10 hours.

  I wonder how can I fix? I tried it turn on and turn off, but the same problem persists.

  It came with 8 Windows preinstalled thereforeI don't have the installation disk and I don't have access to the desktop

  Any solution please?

  Thank you

  Hello

  I'll get you the link and restore your computer to a previous working state.

  http://support.Microsoft.com/kb/949358/en-us

  Please reply with the status.

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• My computer says updated configuration failure, recovery changes, do not turn off your computer... I left on three days and he said that

  My computer says updated configuration failure, recovery changes, do not turn off your computer... I left over three days, and he said that. Does anyone know how to get that back in Windows so I can use my computer. It is a laptop Windows 8.

  Do a Startup Repair:

  Auto repair - run in Windows 8 - Windows 8 Forums

  Let us know if it is not resolved

• Default configuration updates window to update. returning from changes. do not turn off your computer

  I, too have this problem, however, it's on my new Lenovo Thinkpad 2 and the endless loop is going for 4 1/2 hours. I'm crazy! I only had it for 4 days. Can someone please help?

  Hello

  Welcome to the Microsoft community.

  I understand that you are unable to install the Windows updates and receive an error message.

  This must be due to the corrupted Windows Components update or conflict between third-party applications or external devices.

  I suggest you perform the steps below in the Microsoft Help article:

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note:

  1. When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  2. Please do not perform upgrade in-place or reinstalling Windows.

  3. after the boot minimum troubleshooting step, read the sections "How to reset the computer to start normally after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  Hope that it can solve the problem. If the problem persists, please answer us, we will be happy to help you.

  Thank you.

• Default configuration of the windows features. Restoration of the changes. Do not turn off your computer... HEEELLLPP!

  After restart my Asus X55oE due to necessary updates, I got «default configure features windows.» Restoration of the changes. Do not turn off your computer. After reading several messages through other forums, I turned it and then turn again only to receive the same screen. Some of these forums say that it can take 2 hours or more because of so many updates made at the same time. I think I was trying to upgrade windows 8 for windows 8.1.

  I'm really worried about it just because I just got back this PC from ASUS and am needing to work. Can someone tell me if there are other options or make sure that it just take a while? I also read that you can actually go to the control panel > windows update > help to erase mistakes. Also, someone said that you can customize the number of updates at a time can be both. I certainly do not happen again. Help would be greatly appreciated. Thank you in advance!

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions while, Windows 8.1 in the computer installation.  We are happy to help you in the matter of fixing.

  You can try to follow these suggestions mentioned in the Microsoft article below to solve the problem with the installation of Windows 8.1 because Windows 8.1 is also an update for Windows 8 and these suggestions would help you with the same.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358/en-us

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If this does not help then, try to disable anti-virus and see if that helps.

  Disable the anti-virus software

  (Also applies to Windows 8 and 8.1 of widows)

  http://Windows.Microsoft.com/en-us/Windows/disable-antivirus-software#1TC=Windows-7

  Note : Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.