Failures of Dell Dimension 4700

Hello! This is my first post. I came here for support on one of my older Dell systems today, my only first. (I did recently acquired another). It was my first computer, a helping hand me down from my parents back in 2011. He never ran well. I blamed it on a lot of things to the wire of time, starting with the aging of processor Pentium 4, bad caps on the motherboard to hard drive errors. USB works, extremely slow performance, stops and weird/sali post codes at the start are all symptoms. Once I hit him (not very hard) once out of frustration and she completely restarted. Then, it worked fine for months. This weekend, however, I was reached behind the unit to plug in a USB key (the front USBs long quit date, as I mentioned above) and it stops without any sign of restart. I have tried unplugging for a while, and then reconnect (it worked in the past, it has happened before), but it did not help. I checked on the inside, and the Green LED on the motherboard was off. Then, I started to suspect the PSU. A paper clip test confirmed my suspicions... and I could see the capacitors that have failed inside during the inspection below. I tested the power supply that failed but in my other 4700, and it failed. I borrowed the PSU work from this computer and put it in one with faulty POWER, but instead of starting block flashes an orange light by the power button. The power failure took the motherboard with it: (?) Any help is appreciated! Thank you!

CryptoCracker

Hello! This is my first post. I came here for support on one of my older Dell systems today, my only first. (I did recently acquired another). It was my first computer, a helping hand me down from my parents back in 2011. He never ran well. I blamed it on a lot of things to the wire of time, starting with the aging of processor Pentium 4, bad caps on the motherboard to hard drive errors. USB works, extremely slow performance, stops and weird/sali post codes at the start are all symptoms. Once I hit him (not very hard) once out of frustration and she completely restarted. Then, it worked fine for months. This weekend, however, I was reached behind the unit to plug in a USB key (the front USBs long quit date, as I mentioned above) and it stops without any sign of restart. I have tried unplugging for a while, and then reconnect (it worked in the past, it has happened before), but it did not help. I checked on the inside, and the Green LED on the motherboard was off. Then, I started to suspect the PSU. A paper clip test confirmed my suspicions... and I could see the capacitors that have failed inside during the inspection below. I tested the power supply that failed but in my other 4700, and it failed. I borrowed the PSU work from this computer and put it in one with faulty POWER, but instead of starting block flashes an orange light by the power button. The power failure took the motherboard with it: (?) Any help is appreciated! Thank you!

CryptoCracker

Is the power button LED, solid or flashing and what color?

What is the reading of the 4 on the rear panel diagnostic lights?

The tool and Dimension 4700 Service Manual/Diagnostic Guides are here:

http://downloads.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4700_service%20manual_en-us.PDF

Are there messages of error, or 'tweets '?

Yes, it is possible that the motherboard is shorted [aka fried]

Bev.

Tags: Dell Desktop

Similar Questions

  • Upgrading RAM Dell Dimension 4700

    Hi all

    OK I will try once again to this type. The first time I tried to type this my Surface frozen without reason and had to be properly closed. OK, I'll update the RAM on my Dell Dimension 4700 and I need help and advice before I do. My Dell says it has 0.99 GB of RAM installed. I looked inside and found that there are two sticks of 512 MB of RAM. I found (2 sticks of 1 GB) 2GB of RAM for Dell Dimension 4700 at amazon.com and intend to purchase that. So when I update the RAM I get two sticks of 512 MB and replaced with new 2 sticks of 1 GB from amazon? Are there precautions should I take? (In addition to wear an anti-static wristband) Thank you.

    Before you buy, go to http://www.crucial.com/usa/en/systemscanner

    Download and run the Crucial scanner.  This will tell you:

    • supports memory of how many are in your computer
    • How much memory is in each
    • the maximum memory that can be installed on your computer and how
    • the right kind of RAM in your computer

    Do not buy crucial, but pay attention to what the scanner says that you need.

    In short, if you have only two supports from memory, then Yes, you need to remove the memory that is in them to put in new RAM.  However, just because you can buy two memory modules of 1 GB does not necessarily that your motherboard will accept them.

    When replacing memory.

    See http://www.crucial.com/wcsstore/CrucialSAS/pdf/install-guides/ram/crucial-dram-install-guide-en.pdf

    • take precautions against static - touch the chassis first; do not touch the contacts of the RAM modules
    • Unlock the pliers and pull it up
    • Orient the new module properly - there is usually only one way correct to put in - and push straight down firmly, but without wavering until closing locks.
  • have dell dimension 4700 xp need help with outlook express I have error message and can not send email

    I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

    Thank you, Gina Davis

    I have

    He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

    How to add your Hotmail e-mail account to Microsoft Outlook Express
    http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

    If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

  • Dell Dimension 4700 upgrade tips Help!

    Hello Dell Community, I currently have a Dell Dimension 4700 and hoped to upgrade my computer to a computer game, with a budget of around $100-200.

    I wonder as to the game going, that upgrades would produce the biggest change and progress in the game? I'm hoping to improve up to 2 GB of Ram and add a video card, but don't know if it is the best choice to go.

    I have studied this subject and found several posts in the forums, but they were all overwhelmed and I hope to get some knowledge as well as recent graphics cards or Ram that can improve my FPS in game and all around my budget. Thank you.

    Record of Dell:

    Name of the operating system: Microsoft Windows XP Home Edition
    Version: 5.1.2600 Service Pack 3 Build 2600
    System model: Dimension 4700
    System type: X 86-based PC
    Processor: x 86 family 15 model 3 Stepping 4 GenuineIntel ~ 2793 Mhz
    The version of the BIOS/Date: A10 of Dell Inc., 04/01/2006
    SMBIOS Version: 2.3
    Total physical memory: 512,00 MB
    Available physical memory: 191,89 MB
    Total virtual memory: 2.00 GB
    Available virtual memory: 1.96 GB

    Majera

    Sorry, but there are very few, you can upgrade on a child of seven years 'obsolete' 4700, to make a system of 'game '.

    Better to put the money upgrade, to buying new desktop PC.

    Bev.

  • Dell Dimension 4700 solid Amber Light but now nothing

    A few months ago my Dell Dimension 4700 does not, he just had a solid clear amber.  So I read on the forum and I replaced the memory and the computer booted.  It lasted for about 6 weeks, and then I got the amber light again.  So I moved the memory and used an eraser to remove static.  Still had a yellow light.  Then a few days ago I had no amber lights - nothing.  So I bought a pwer supply and installed today and it still does not work!  Any suggestions?

    Thanks a lot for your helo!  I bought a power supply, but was still the question, so I bought a motherboard and my computer is a race!   Thanks again!

  • Dell Dimension 4700 fack back to factory settings

    I want to configure the pc back to factory settings.  Was told by the Geek Squad just insert the disk operating system & click 'recover to factory settings', but that option is not there.

    Windows XP Professional

    Hello

    Here is th manual for your system http://support.dell.com/support/edocs/systems/dim4700/en/om/Y69490LRs.pdf

    How to restore http://www.ehow.com/how_6776528_restore-dimension-4700-factory-settings.html?ref=Track2&utm_source=ask

    Concerning

    GT4U

  • Computers Dell dimension 4700

    When I start my computer, it turns and stops when the Dell logo appears whit the bios version and then the disk hard led by turns off and the power led the rest fan.  without starting windows, I removed the batery and the power for 24 hours. And still does not start what I can do.

    PD: Bios indicator stops at 10% the HHD turns off

    RAM and hard drive or is bad.

    Get out all the ram and put 1 piece at a time and or disconnect power to the hard drive and turn on.

    Post it with hard drive error or did not post it at all.

    The age of the system means that the drive is probably dead.

    There is no sweet miracle for physical hardware failure.

  • After my Dell Dimension 4700, repair the sound currency - driver for multimedia audio controller not installed.

    I need help for sound on my desktop back.  Help, please

    Hi LillyIversen,
     
    Download the Audio drivers from the following link:
     

    You can also follow this step to install the drivers:

    a. double-click the type of device you want to update or change.

    b. right click on the device driver specific, you want to update or change.

    c. click put to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

    More information on:

    How to manage devices in Windows XP

  • Reference 2004 Dell Dimensions 4700

    Recently, I installed Windows 7 Professional on a computer that was running XP Professional.  When I start the computer it shows a black screen, asking to press F1 or F2.  When I press the F1 key Windows load normally.  I also I tried to install a 500 MB Seagate hard drive and cannot get the DVD boot the disc of Windows.  I did go to BIOS and select the DVD USB command as first to start.  Does not work.  Need help.  Thank you!

    Thanks Osprey4, I could correct the BIOS resetting to the default setting of Dell.  Windows starts fine now.  Thanks for responding!

  • My Dell Dimension 4700 with XP had power options have disappeared

    After being drafted by a friend to get rid of some downloads that wouldn't uninstall, my power options disappeared.  Cannot find it anywhere.  How can I solve this problem?

    After being drafted by a friend to get rid of some downloads that wouldn't uninstall, my power options disappeared.  Cannot find it anywhere.  How can I solve this problem?

    Click HERE to download restore power schemes in Windows Xp. execute the file.

  • updated reference dell dimension and have no sound what to do to restore the sound?

    I have no noise ran restore disc have everything clean and now I have no audio / suggestions?
    It is a dell dimension 4700 with windows xp home edition installed.

    Bill Smithers is OK... but my experience has been that the list of drivers on the Dell site for sound is confusing because they often have more than one driver.   Download you the driver from Dell and it does not work, and they have another one, try the other.

  • current equivalent to the Reference Dell Dimension 4700C desktop?

    I need to buy a new PC. My last purchase was in 2006. The computer is a Dell Dimension 4700 C.

    What today is equivalent to this computer.

    Thank you.

    Brunetto

    http://www.Dell.com/us/p/Inspiron-3647-small-desktop/PD.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

    Personally, I would buy a Mini Tower, easier to upgrade version.

    http://www.Dell.com/us/p/Inspiron-3847-desktop/PD?ref=PD_OC

    Bev.

  • Readers of DVD of dimension 4700

    I have a DELL Dimension 4700 that was purchased in 04 ' or ' 05 and need a little help...

    The DVD RW drive has a problem of bad vibes and won't burn DVD discs...

    I came to the conclusion that I would just put in a new DVD DL drive in my machine, but I'm not sure what type I need...

    SATA or IDE?

    Belarc Advisor reports my controllers as follows:

    Intel (r) 82801FB Ultra ATA Storage Controllers - 2651
    Intel (r) 82801FB/FBM Ultra ATA Storage Controllers - 266F
    Primary IDE Channel [Controller] (2 x)

    Belarc Advisor reports my readers as follows:

    _NEC DVD +-RW ND - 3530 has [CD-ROM drive]
    SAMSUNG DVD - ROM SD - 616E [CD-ROM drive]

    WDC WD800JD-75JNA0 [hard drive] (80,00 GB) - disk 0

    Any assistance that can be provided would be greatly appreciated...

    Thank you

    Todd


  • Help! My Dimension 4700 trying to kill me!

    Hello. Almost all of the electronics in this House are messed up!  I've not turned my Medtronic implant, but I hope it's ok! HA.  I have a computer Dell Dimension 4700 older with a NVIDIA GeForce 8400 GS (installed a few years ago). I have been using the computer, perhaps I should say "trying to use" the computer when all of a sudden the standby screen popped up, then the screen became black. With the exception of the arrow of the mouse on the scree, I can't have anything else. I tried to restart. Also, I unplugged the comp. which was held in the power button. Has control, alt, deleted. You press F1, F2, F11...! And nothing. I found this forum by doing a search on google. Ive been reading forum "Office Dimension 4700 primer not" and to be honest, I don't understand most of it! If the "battery" is bad, where is he? How do I replace it? I didn't know that there was a battery dang! Use now, my phone which is slow, so will check for any response. I'd appreciate any help. Thank you.

    Lisa Z

    Hello. Almost all of the electronics in this House are messed up!  I've not turned my Medtronic implant, but I hope it's ok! HA.  I have a computer Dell Dimension 4700 older with a NVIDIA GeForce 8400 GS (installed a few years ago). I have been using the computer, perhaps I should say "trying to use" the computer when all of a sudden the standby screen popped up, then the screen became black. With the exception of the arrow of the mouse on the scree, I can't have anything else. I tried to restart. Also, I unplugged the comp. which was held in the power button. Has control, alt, deleted. You press F1, F2, F11...! And nothing. I found this forum by doing a search on google. Ive been reading forum "Office Dimension 4700 primer not" and to be honest, I don't understand most of it! If the "battery" is bad, where is he? How do I replace it? I didn't know that there was a battery dang! Use now, my phone which is slow, so will check for any response. I'd appreciate any help. Thank you.

    Lisa Z

    The power button LED, green, solid orange, green, orange, flashing flashing or off?

    What is reading on the back panel diagnostic lights?

    The Dimension 4700 Guide diagnostic and troubleshooting is here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4700_service%20manual_en-us.PDF

    Bev.

  • Dell Dimension 2400 HD failure. installing new HD

    I have a Dell Dimension 2400. The computer crashed and the computer shows now no hard drive installed. I removed the hard drive and put it in one of my other computers, and my computer does not recognize the drive as a hard disk.

    I put another hard drive in my Dell, (same 40 MB; but different mfg) and the new hard drive is not recognized as a hard drive. I go into the configuration and it shows the diskette and cd installed, but not installed hard drive. Looking at the motherboard, is there that one connection for HDD in these models, so cannot plug into any other manor. Put the jumper to master on and cable that SELECT on but again Dell shows no HDD installed.

    The orig Dell hard drive, does not present as a drive in my work computer, but I'm trying to replace it with that.

    When I insert the OS disc that came with the system, it starts repairing and loads the files, but cannot format the hard drive and doesn't declare any installed hard drive.

    Assuming that the drive hard orig failed, and the new hard drive is a drive to work, are there specifics on something special that needs to be done when you install a new hard drive in a Dell Dimension 2400? I am unable to find all the technical manuals on how to install a new hard drive in my Dell, even though I have all of the orig CD that came from Dell.

    Any help/thoughts would be appreciated.

    Thank you...


Maybe you are looking for

  • VI using ActiveX runs under XP, load in Win7 64 bit, but hangs in Win7 32 bit.

    I have a VI that works under windows XP, supported in Windows 7 64 bit (for editing only) but hangs Labview in windows 7 32-bit.  I know the code works, but I have not tried on this particular PC before so I guess that there is an error of configurat

  • Compaq Presario SR5414UK Graphics Card + PSU

    Hello I have a Compaq Presario SR5414UK now and you want to add a nVidia Geforce 8800GTS which me curreently running on the integrated graphics card. To do this, I apparently up to my diet because I have 300 watts and need from 400 to run this card.

  • Photosmart 7760

    I have a photosmart 7760 which I like and just bought a new computer hp laptop with windows 8. If anyone can help, I need to know if I can print wireless and if so someone can give me fool proof instructions. I tried in vain to find a phone number fo

  • HP Photosmart Plus B209a-m wireless disconnects once the system is shut down

    I use the HP Photosmart Plus B209a-m on a Dell XPS 16 with Windows 7 64 bit. I have set the printer to connect to the wireless router Belkin isn't on the network. I have setup the printer several times and had it work wireless several times. Once the

  • I am trying to remove the read-only in a file of windows vista program

    Hello I'm having a problem with the program files in Windows Vista. I have a file that I need to be able to write to and I can't get out of the read-only mode. Can someone help me with this please? Thank you.