Failures of reminder SequenceFilePostStep
I use the "SequenceFilePostStep" engine callback TestStand to perform several short subsequences. If one of these short subsequences in this callback fails, I want the main sequence to detect this and not.
I can detect the failure of the sequence when running step by step in the recall of "SequenceFilePostStep" by reading RunState.SequenceFailed. However when I went back to MainSequence this variable is false. I also tried searching the knowledge base and used alternatives "ThisContext.RunState.SequenceFailed" and "RunState.Main.RunState.SequenceFailed" - all are false. Y at - it a variable that remembers the State of the "SequenceFilePostStep" engine recall, or do I need to set up a global file pass this status to the main sequence?
Place a step of instruction as the last step of the SequenceFilePostStep (at the bottom of cleanup).
Give him a precondition to the: RunState.SequenceFailed
The Expression of the value: RunState.Caller.RunState.SequenceFailed = True
If you want to see what failed on the report, you must follow additional steps.
Tags: NI Software
Similar Questions
-
How to determine when a subsequence in the main group of MainSequence was called simply?
I want to implement a custom for my operator Interface progress bar and I've seen some tutorials OR how do but IMHO, the solution is very ugly in which the MainSequence hardcoded events UI message statically send completion percentage.
Which, according to me, a better method would be to have the reminder SequenceFilePostStep increment a counter FileGlobal only when a subsequence in the main group of MainSequence has been called. I already understood how to get the total number of subsequences MainSequence into the main group using the expression:
RunState.SequenceFile.AsSequenceFile.GetSequenceByName ("MainSequence"). GetNumSteps (StepGroup_Main).
It is the bold part above that I don't know how to do and that you would be grateful for assistance in this regard. Once I have these two values that I can simply divide the two and send a UserMessage interface operator with completion percentage.
Thank you!
Hi Sean,.
Instead of having the SequenceFilePostStep in your file of the client's sequence, you can put the statement step in the process template using a reminder of ProcessModelPostStep.
Previously, when I said the words, I meant the prerequisite, but I think that you understood what I meant...
It's a thing of style and readability - a precondition will make your movie look nice and compact, whereas an IF / END block improves readability, etc..
I am currently writing sequences to use flow control measures (IF / END, SELECT / CASE, FOR, WHILE) for USE related to logical tests, where decision making or a loop is part of the requirements customer and pre conditions TestStand logic such as this.
See you soon,.
Charlie
-
Hello
I use post step reminder of failure to manage failures in my sequence. The sequence of reminder post not failure has many steps inside. I realized that other reminders like post step runtime error reminder and Post result list enrty do not work to get the stage Post failure callback procedure. Any suggestions for the error handling in the reminder of failure stage post?
I also generate a report for the steps in the reminder of failure stage post. How can I do this?
Thank you
Yvette
Thanks for your reply. I use developed approach for reporting. I uses the property Locals.Resultlist of the recall of step seq file post failed to accumulate the results and have a LabVIEW VI in the Group of the cleanup step to remove the results of the local population. List results and writing in an excel file.
Thank you
Yvette
-
I received a ' reminder: update your Apple ID ". It's a spam?
I received a ' reminder: update your Apple ID ". It's a spam?
Here is the message:
Dear
Due to recent updates, we ask a lot of our customers to update their information, it's nothing to worry about. We ensure that we have the correct information on the file and that you are the legitimate. Failure to comply with this may result in your account being limited. Thank you for taking time out of your day to confirm your information.
Update your account information, please click the link below:
If you have any questions or need assistance, please contact us
Thanks again,
Support of Flavia
© Flavia 2016. All rights reserved.
Thanks for your help?
Roger
-
Reminder to register suddenly does not work?
Laptop bought in February and has been recorded successfully for warranty with Toshiba etc. In the last ten days, I got error messages repeated that the Toshiba registration reminder has stopped working - windows error message is actually:
Description
Stopped working
The failing Application path: C:\Program Files\TOSHIBA\Registration\ToshibaReminder.exeI do not understand why this reminder exe will need to run at all (although there seems to be a file of configuration related dated 23 July 2009 .which implies the registration tool may THINK my laptop is out of warranty now?)
All of this occurred at the same time extensible WIN7 'blue screen of death' crashes, and I wonder if they are connected... more precisely, if the Toshiba program failure is the cause of the BSOD?
Hello
You have already saved your laptop, then you can delete the system now. Go to the control panel to uninstall it.
-
Hello
I'm sorry for the bad English.
Satellite A300.
Has performed the update to Win7 upgrade Toshiba program.This program works;
TRDC reminder and Toshiba Recovery Disc Creator after update to Wins7?The TRDCReminder program found no "revival of the computer.
Toshiba Recovery Disc Creator program was created and incomprehensible?If what these program how to recover your computer in case of failure?
TEMPRO works in Win7?Thank you very much.
With greetings.Igor.
Hello Igor
In my opinion, you must create recovery disk before upgrade you to Win7. I did the same thing.
Later, if something goes wrong, you can use your disks and install Vista using the created recovery disks.I don't understand why you want to wait and create these disks after upgrade. This recovery creator disc doesn t create recovery image in the current state, but always the same recovery image, you got with your laptop.
TEMPRO should work in Win7 too.
-
How to set the prerequisite in SequenceFilepostStep?
Hello
I have the SequenceFilePostStep reminder in my testplan when I run some events.
How can I create a condition precedent to the SequenceFilePostStep as a step in this callback is not executed if "Record result = Disabled" for the current stage?
Thank you
Thx for your answer.
Meanwhile, I found the correct setting in RunState.Caller.Step.ResultRecordingOption which is 0,1 or.
I put my condition for RunState.Caller.Step.ResultRecordingOption == 1 then everything works now.
-
How can I stop in case of failure?
We have developed a c# application that manages the execution of a test sequence. Currently, our code opens a test via the call execution:
seqFileViewMgr.GetCommand (CommandKinds.CommandKind_ExecutionEntryPoints_Set, 1). Execute (true);
It detects the completion of a test via the EndExecution event execution and I determine the overall looking at Execution.ResultStatus in my EndExecution event handler callback.
They changed the conditions and I need now to detect the State of each step and (if requested) stops execution of test when a step fails. Can someone enlighten me please know what changes I should do for my design to achieve this step by step of the monitoring?
There are certain features that may interest you.
Break failure - toggleable setting located under the run menu in the sequence editor and can also be set through the API with StationOptions.BreakOnFailure or StationOptions.BreakOnSequenceFailure
Goto Cleanup on the failure sequence - this is a frame at the bottom of the first page of the dialog box options station and may also be defined by the sequence in the sequence Properties dialog box. It can also be set programmatically using Sequence.GotoCleanupOnFailure or StationOptions.AlwaysGotoCleanupOnFailure.
SequenceFilePostStepFailure reminder - this is a sequence of special reminder, that you can create in your sequence files that will be called whenever a step fails. You can add a special code to this reminder to customize what happens when a step fails in different ways.
Hope this helps,
-Doug
-
I want to force a sequence to fail on an error, but also a failure
I want to force a sequence to fail on an error, but also a failure. It came because the only way I can find to stop the dialogues of Labview error to arise in TestStand is to use the property to ignore errors of time run on a step. I don't want these dialogues to occur because operators do not know how to deal with them. The problem with using the property to ignore Run Time Error, it now is a step that had a runtime error will not kill the sequence. I really want to interpret a mistake as a failure.
I found a link to this same question years ago and the answer seems reasonable. See http://forums.ni.com/t5/NI-TestStand/Force-TestStand-Step-to-Fail-When-Error-Occurs/td-p/435510.
In this post, I found the following: "use the SequenceFilePostStepRuntimeError callback sequence. In this sequence, set Parameters.Step.Result.Status = 'Fail' and Parameters.Step.Result.PassFail = False ". But when I pull up the reminder SequenceFilePostStepRuntimeError, niether of these parameters have on the list of parameters. I have Parameters.Step and Parameters.Result, but nothing filled under these broad categories. I don't know if I have a Setup error, or if the reminder has been changed over the years.
Someone at - it advice?
Thank you
Dave
Put a breakpoint in your sequence a little after the step and check the runstate variables to see if they match. This post was made in 2006 and there are a lot of changes since then. Adding in the breakpoint should allow you to see what variables are created at run time, as the passfail. You can then enter in the browser of the expression. When chacking the statement, you will get a warning saying that the syntax may be incorrect, but it's nice. It is also said in this post if you know what you are doing to the variable may be created when running and you will be fine.
-
Hi, at the and of the test failure, I have the need to print the message of failure on the label. I need to print: SequenceName testName, measurement, high limit, low.
Is there something already implemented in TestStand? What is the right approach, should I use the reminder "SequeneFilePostStepFailure"?
Thank you very much.
Hello
Try to use "Parameters.Step.Name".
Why you will not see it? Because you go to the step of the object. and the name of the property
For more information look in TS-help under the terms of the Index 'Step '.
In this thread, there is a fine example of this reminder
http://forums.NI.com/T5/NI-TestStand/repeating-a-failed-sequence-once-more/m-p/1042268
Concerning
Jürgen
-
CVI8.5 crashes with failure 'insufficient memory' after compilation
Hello
I used the 8.5 CVI to compile my project in debug mode.
Before the last my latest changes short I could run the project without any problems.
Now after beeing ready with the compilation nothing happens for awhile, then ICB crashes and an 'insufficient memory' message appears, sometimes a "a reminder of custom control triggered an exception" message.
I noticed that in the moment just before the output of cams message memory the size of memory used virual windows goes suddenly to 2.86 GB.
The pc has 2 GB of physical memory and 6 GB of virtual memory, at the same time is available free memory.
If I change the debug to zero level, the software is functioning normally, so I think that there is no failure in the code.
What is the problem?
Hello JR,.
Thanks for your message, you're totally right!
After that I added a few features the problem had disappeared.
The failure seems to be fixed in CVI 9.0, because the project has worked without adding features.
I tried with different keyword in the forum, but I have not found this answer.
Maybe it was the problem in finding that the theme of the threat has nothing to do with my problem.
Thank you
Torsten
Solution of the top link (another Thread) as information to third parties:
================================================================================================================================================================
Posted by LuisG, proven Active veteran, 19/11/2008 18:33
Hi Trevor,
Thank you for the presentation of your test program. I was able to reproduce the 'out of memory' you were see and so I investigated this problem first. I'll try to tackle the problem of the acquisition of data/timer tomorrow.
I confirm that this is a bug in CVI which was previously unknown - and which has been around for a long time, without being detected. The conditions that cause this bug manifest itself are extremely rare, but you were still 'chance' to replicate. Fortunately, there's a pretty easy fix that you can do which should make these conditions disappear.
The problem occurs when, at some point during the connection phase, an internal memory allocation is requested for a list of the imported symbols, if the list size is between symbols 8187 and 8189. In the case of your project, it happened to be 8188. This list includes all the symbols that your project defines and also imports from all libraries (including the CVI libraries) associated with the project. It turns out when you added the new source file, the total came to be 8188. It depended entirely on what is in your project, of course, but also on the specific version of the CVI, you use.
A workaround is to add some free in your source file functions, such as the total number of symbols will change. For example, I added the following code to myAsyncTimer.c, which was enough to no longer trigger the bug:
void foo (Sub)
{
}
foo1 Sub (Sub)
{
}
foo2 Sub (Sub)
{
}
void foo3 (void)
{
}
void foo4 (void)
{
}
void foo5 (void)
{
}I'm still sorry for the double trouble. I will then consider the other problem, and I'll let know you when I have more information.
Luis
================================================================================================================================================================
-
881 failure: The Application author does not match debug author token
Hey guys, I'm a newbie at software development and don't know anything about the other languages except HTML and CSS so I decided to try the apps program to see how it works and if it's the right think for me. I received my 'key' for the playbook and generated and download the Debug Token. My first idea was to put the Hello World app (that I copied on the BB site) on my playbook to see if everything works, but every time I try to download the app, I get "the application failure 881 author does not debug author token.
I have tried a few troubleshooting myself (make another Debug Token, adding the
and a blackbery - tablet.xml with these fields in the config.xml file and) and still nothing. Do you know the guy what is happening and what should I do to solve this problem, so I can download my apps on my playbook? Thank you
Oskar
There is an easier way... and maybe just an alternative. I had this problem before and the reminder to change the bbwp.properties file to run.
For more information, see this page:
Copied from this page:
For PlayBook OS applications
- In the SDK BlackBerry WebWorks for BlackBerry Tablet OS installation folder, navigate to thebbwp\bin folder.
- Using a text editor, open the bbwp.properties file.
- Add the path to the file to debug token using the debug_token > tags.
path to debug token file
Example: file bbwp.properties with the path to the file debug token
-quiet C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\jre AirAppTemplates AirAppTemplates C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\bbwp\blackberry-tablet-sdk ext C:\my_debug_token.bar You can now load your app on a debug-enabled BlackBerry device without having to sign
-
Original title: I can't connect to a server to Samba from Windows 7 files
I used to use a Mac machine to connect to a file server Samba as smb://myfileserver.mycompany. Now I use a PC with Windows 7 Professional and when I write the address on Explorer as \\myfileserver.mycompany it opens a pop-up to enter my credentials, but when I put my authentication information and click ok, it reminds me the pop-up to try again with a message stating "connection failure: unknown username or bad password.'. '.
I tried several times but still the same result.
Is there another way to do this?
Is there a third party app that will do this job?
Thank you.
Hello
(1) is the computer connected to the domain?
(2) is the issue specific to your username and password?
(3) tried to connect from different computer?
If the problem is specific to your username and password please contact the it Department for assistance.
-
SOA beneficiarymanagerapproval reminder composite service failing.
Hello everyone
Hope this mail finds everyone in good condition. My question is about BeneficiaryManagerApproval, we use this composite for approval to the manager level. So right now we are testing this new IOM https url, we have implemented everything you need - deploy the composite configuration settings, set discovered as soapuri, oimfrontenduri, and other things. Now, when a user get a request for a resource, the request goes from the approver and he could see, approve. But after approval in the reminder service, we see some difficulties. We checked the Forum and found some errors as shown-
The journal of the soa errors are as follows: -.
Caused by: java.net.ConnectException: tried them all: '1' address, but not able to connect via HTTP to the server: ' hostname, port: '80 ".
at weblogic.net.http.HttpClient.openServer(HttpClient.java:342)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:435)
at weblogic.net.http.HttpClient.New(HttpClient.java:261)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:218)
< WARNING > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not invoke endpoint URI " " https://host/WorkflowService/CallbackService "successfully due to: cannot call endpoint URI" https://host/WorkflowService/CallbackService "successfully due to: javax.xml.soap.SOAPException: javax.xml.soap.SOAPException: bad response: 404 not found from url" https://host/WorkflowService/CallbackService " >
< error > < oracle.wsm.resources.enforcement > < WSM-07501 > < failure in Oracle WSM Agent processRequest, category = security, function = agent.function.client = default, composite application = BeneficiaryManagerApproval, modelObj = CallbackService_2, political = null, policyVersion = null, assertionName = null.oracle.wsm.common.sdk.WSMException: no protocol: localhost
at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor.initialize(SecurityScenarioExecutor.java:476)
at oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor.init(SecurityScenarioExecutor.java:347)
at oracle.wsm.security.policy.scenario.executor.Wss11SamlWithCertsScenarioExecutor.init(Wss11SamlWithCertsScenarioExecutor.java:76)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:259)
at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:282)
Caused by: oracle.wsm.security.SecurityException: no protocol: localhost
at oracle.wsm.security.identity.WSMIdentityReaderValidator.getHostname(WSMIdentityReaderValidator.java:206)
at oracle.wsm.security.identity.WSMIdentityReaderValidator.getIdentity(WSMIdentityReaderValidator.java:149)
Caused by: java.net.MalformedURLException: no protocol: localhost
at java.net.URL. < init > (URL.java:585)
at java.net.URL. < init > (URL.java:482)
at java.net.URL. < init > (URL.java:431)
< WARNING > < oracle.integration.platform.blocks.soap > < BEA-000000 > < could not successfully invoke the endpoint URI 'localhost' due to: cannot call endpoint URI 'localhost' successfully due to: oracle.fabric.common.PolicyEnforcementException: no protocol: localhost >
< 10 February 2015 10:33:48 CST > < error > <oracle.soa.bpel.engine.ws> < BEA-000000 > < had FabricInvocationException java.net.MalformedURLException: no protocol: localhost
After searching a lot on the internet, I found things as to check if soapuri is correct - I checked these settings, they are correct. This what should I do to remove this exception, why this recall fails and demand by getting not completed? Do I need to add SSL certificate in the keystore because it's SSL communications. Please help me because this problem becomes serious, thank you in advance for the help and suggestions.
Thanking you once again.
the problem is solved by adding modules of weblogic in file oim.config servers in OSH. Thanks to you all.
-
I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.
I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.
There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.
Hey AmnonMikeCohen,
Thank you for being a part of the communities of Apple Support.
I understand that your Mac is not start properly after the power went out. Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:
Reset the management system (SCM) controller on your Mac.
How to reset the NVRAM on your Mac.
See you soon.
Maybe you are looking for
-
«I'm in Firefox 20.0.1 on a 660 s Dell Windows 7 Home Premium.» I downloaded and installed Firefox in May. I can't take it to 21,0 for the following reason: "Update available" window for Firefox 21.0 opens every day. I click on update Firefox and "Do
-
Satellite A200-1N2 what HARD drive are supported?
Hello I have an A200-1N2, with the original 120GB hard drive.I would like to upgraded to a larger capacity HARD internal disk.Can you please me, whose internal hard disk capacities and types (only IDE?) are supported? Thank you very much!!Leor
-
default e-mail account option does not appear
I have a mini ipad with ios 9.2.1. I want to choose gmail as my default e-mail account, but the 'default' option does not appear (as it does on my iphone with the same version of ios). It must be less than the "signature" option in "Mail, Contacts,
-
Bought it two months ago for use purely photos for my husband and ocassional navigation that I have a laptop of my own. From the first it was so slow and it is not my internet connection because my computer is fine. Whenever it is open to use if th
-
Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI. I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control. The error is recov