False documents of ATTR_YREVERSE

Similar Questions

• False document title shows when I open a file

  Hi all:

  I'm working on an iMac with El Capitan 10.11.6. Until last week, when I upgraded to DC, hoping that it would solve my problem (not) I used the previous version of Acrobat Pro. Regardless of the version of Acrobat, whenever I open a PDF file that came originally form a Word file, the wrong file title appears in the title bar above the page. Instead of ' BigFile-customer ABC-2016 "the title will be what it was in the time to be the first I did the file ' BigFile-GENERIC-2009" even if I re - save the file, add or subtract security, close and reopen, the name in the title bar is always wrong and always an ancient name of years. "" It is a problem since I customization of the same document for different customers and change names, so I can tell apart them. Curiously, if I save and close the file, it appears in the office with the correct name and happens at all with files that have been made originally in InDesign. This problem just started a couple of weeks. Any ideas? What could have changed to cause this just start happening?

  If you get the title right in the source document in Word (or even empty), which would be automatically sent on when you create PDFS.

• False documents

  Data gets load from source to the target by an interface ODI, in which table the erroneous records are stored?
  
  ODI, how can I set the option redirect these errors in my table?

  Hi-

  In ODI, error records are moved to the _targettablename of $ E your default interface. So you can display the records in error by querying the table in your schema. This way you can recycle errors when executing the second time and insert records into your target if it is a valid record.

  If you want to store the records in your own table, then you must modify the steps of CKM. I will suggest that you can use the table to display/change default error error records unless you have no special requirements.

  Thank you
  Silou René-coral

• What attribute 'checked' of entry? What I do: "removeAttribute ('checked')" or "checked = false '?

  SCRIPT
  function vibor() {}
  If (document.getElementById('autologin').checked = true) {}
  document.getElementById('autologin').removeAttribute ('checked');
  document.getElementById('autologin1').style.backgroundPosition = 'top left ';
  } else {}
  document.getElementById('autologin').createAttribute ('checked');
  document.getElementById('autologin1').style.backgroundPosition = "lower left";
  }
  }
  / SCRIPT
  If I used "removeAttribute" in front entry is checked. But if I used "checked = false", the face of entry not verified, but he checked in the HTML (if FireBug not lies).
  Please, help me someone! I don't know what I have to do.

  PS Please, scolds me for my English. I speak much English and who have a cause - I'm 14 years old and lived in Russia, where no one can me helped.

  It is not an attribute, but a Boolean JavaScript variable and you cannot delete it.

  Note that If (document.getElementById('autologin').checked = true) { will set this variable always true.

  You probably want this:

  function vibor(){
   if (document.getElementById('autologin').checked == true){
     document.getElementById('autologin').checked = false;
     document.getElementById('autologin1').style.backgroundPosition = 'left top';
   } else {
     document.getElementById('autologin').checked = true;
     document.getElementById('autologin1').style.backgroundPosition = 'left bottom';
     }
  } 

• Unable to load the document repository uccx (8.5.1)

  Trying to create a variable document and it contains a file from the repo. Everything I tried, translates the variable containing a null value. I put a copy of the file in every part of the dir structure possible, thinking that it was not able to find it, but that doesn't seem to be the case. Should the script be associated with an application to reach the repo? (Just a general question, it is) but I wonder if the application is not configured correctly? I'm out of ideas.

  Thank you.

  It would have been better if you grabbed a screenshot of current debugging.

  Even when I use your logic and with a false document (that is, one that does not exist in my repo), the script still works, because it affects the pointer document2 same false document as document1 pointer.

  

  If you try to retrieve the content of a false document, you should be met with a pop-up window displaying an exception any document not found, etc.  The value null you report is definitely weird and I am not, at this stage, it's user error.  It could be something with your UCCX upward.

  Anthony Holloway

  Please use the meaning of the notes to help the great content in car to the top of searches.

• How can I change the control + left click shortcut?

  Hello

  If I Ctrl + left click a link now, the link opens in a new tab. What I want is that control + left click works as a normal click, so that the link opens in the same tab. Is this possible? So that the control does nothing.

  I already read this topic and I've managed to disable the control + left click, but this isn't what I want:
  https://support.Mozilla.org/NL/questions/931230
  I think I should change the code a bit, but I don't know how.

  Can someone help me? Thank you!

  Kind regards
  Koen

  Here's the revised for you:

  // ==UserScript==
  // @name        Ctrl+click to Regular Click
  // @namespace   YourNameHere
  // @description Change ctrl+left click to regular click on all sites
  // @include     http*://*
  // ==/UserScript==
  function overrideCtrlClick(e){
    if (e.button == 0 && e.ctrlKey && e.target.nodeName == "A"){ // left button + ctrl key
      e.preventDefault();  // stop Firefox from processing
      e.stopPropagation(); //   the user's Ctrl+click
      e.target.click();    // apply a regular click to the link
      return false;
    }
  }
  document.addEventListener("click", overrideCtrlClick);
  

  Who do you want?

• How can I turn off ctrl + left click?

  Hello
  I don't need ctrl + click to do anything its just BOTHERING me so I want to disable it
  I couldn't find any extension to do

  Help, please

  If you are inclined to try a userscript (which runs in the Greasemonkey extension), here's a sample:

  
  // ==UserScript==
  // @name        Kill Ctrl-LeftClick
  // @namespace   YourNameHere
  // @description Block ctrl+left click on all sites
  // @include     http*://*
  // ==/UserScript==
  function killCtrlClick(e){
    if (e.button == 0 && e.ctrlKey){ // left button + ctrl key
      // GM_log("Discarded ctrl+left click on " + location.href);
      e.preventDefault();
      e.stopPropagation();
      return false;
    }
  }
  document.addEventListener("click", killCtrlClick);
  

• Switch to the window, I chose

  I have a mid 2009 Macbook Pro using OS X 10.9.5.

  I almost always have several windows open at the same time and it is often too quick to click on the window, I want to use (or should anyway!) on the use of the Toggle shortcut (cmd-tab, for example). But lately even if I click on a window, my Mac randomly selects another window to really focus (often one), then I start typing and find that I type completely of the false document. It's incredibly frustrating. No one knows how to stop the Mac this?

  PS I just tried with the Toggle shortcut (cmd - tab), and again, it does not take into account my choice and chooses another app/window

• Docking for Presario CQ61-411WM

  I have a guy at work who want a dock for its Presario CQ61-411WM. Is there something available that is compatible with this laptop? I use and do nothing on Docking Stations.

  @Saturn865

  Hello

  Saturn865 wrote:

  Maybe I'm missing something but I don't see any docking port female on the lower part of the computer as it shows in the HP Docking Station reference Guide.

  False documents are added to this Docking Station.

  This unit will be connected to your laptop via the USB cable (it will be in the box).

  One end of this cable is pluged in your laptop and the second to the Replicator of Port HP USB Media (Docking Station) which will be docked to the rear part of HP Notebook Stand. Below is shown the photo that illustrates this situation:

  

  Above the screen is taken from the document from HP that show how to set up this device. You can find it here.

  I found on the movie from YouTube on the HP USB Media Docking Station.

  At the beginning of the film, author it decompresses and describes each of its parts.

  Then, it shows how it looks / works with HP dv6, Lenovo IdeaPad and HP mini 210.

  I write below:

• Disable text selection

  Hello

  How can I prevent selection of text in a webworks app? I found an article by astanley [1], but don't really know how to implement this option to disable text selection.

  Thank you very much.

  Bert

  [1]: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/How-to-prevent-default-touch-and...

  The provided article shows how to disable behaviors of browser default using JavaScript, especially the preventDefault method available on each key event.

  You should be able to disable text selection, if you copy the following into your page JavaScript code.

  document.addEventListener("touchstart", function(e) { e.preventDefault(); }, false);
  document.addEventListener("touchmove", function(e) { e.preventDefault(); }, false);
  

  Note: This will also disable other behaviors that you might not for your application - or you can (for example the code snippet above will disable also pinch in the zoom and scroll.)

• Critical error in QML, module 'bb.data' is not installed, the application will not start

  Hello

  I'm trying to do something similar to the example here:

  https://developer.BlackBerry.com/Cascades/reference/bb__data__xmldataaccess.html

  I learned to expect problems with the QML preview, but this error occurs when you try to launch the application on my device of DevAlpha!  The exact errors are:

  Critical: bb::cascades::QmlDocument: error when loading QML from:   QUrl( "file:///apps/com.example.rim/native/assets//main.qml" )
  Critical:   --- errors:  (file:///apps/com.example.rim/native/assets//main.qml:3:1: module "bb.data" is not installed
      import bb.data 1.0
      ^)
  Critical: bb::cascades::QmlDocument:createRootObject document is not loaded or has errors, can't create root
  

  Note that I added the lbbdata - for the LIBS in my .pro file, so there should be no reason why the app cannont find bb.data!  Has anyone else seen this problem or found a solution?  It is essentially blocking any progress on my app!

  Thank you

  Nick

  try to including this line in your hand:

  BB::data:ataSource::registerQmlTypes();

  the notes say that this has been deprecated in version gold but it doesn't seem to be the case... I created a new project using the sdk of gold and had the same problem you did if I used a data source class above the fixed line!

  false documents:

  https://developer.BlackBerry.com/Cascades/documentation/dev/upgrading/index.html

• Stop scrolling on BB10 - Webworks + BBui.js

  BB10 Webworks + BBui.js / DevAlpha

  I am developing a game based on key events.

  While the size of my screen is set to meet devAlpha in the landscape (1280 X 760: height less 8px), the screen scrolls up/down when I 'touch and move' a finger on devAlpha. I want to avoid this.

  I've read several discussions on this (including Adam) and also read some comments of examples, so I tried the 'solutions' without success.

  -Definition of meta display window (in the index file): no specified height.

  -Script "Inhibitor" (attempt #1: firstly the script "as-is" in my script main screen push".) JS file")

  /* ---------------
   * disable scroll
   * ---------------*/
          preventMove = function(evt) {
             evt.preventDefault();
             window.scroll(0, 0);
             return false;
          };
          document.addEventListener('touchmove', preventMove, false);
  

  -Inhibitory script (try #2: function in my ".") JS file"but the event listener added to the event"ondomready"within the bb.init () function in the index page.

  in my JS file (no event listener is added)

  /* ---------------
   * disable scroll
   * ---------------*/
          preventMove = function(evt) {
             evt.preventDefault();
             window.scroll(0, 0);
             return false;
          };
  

  in the bb.init (); event listener added when the dom is ready (my main screen is 'House')

                 // Fires "after" styling is applied and "after" the screen is inserted in the DOM
                  ondomready : function(element, id) {
                      if (id == 'dataOnTheFly') {
                          dataOnTheFly_initialLoad(element);
                      } else if (id== 'home') {
                         document.addEventListener('touchmove', preventMove, false);
                      }
                  }
  

  (I admit I'm probably lost in the DOM....)

  -Finally, since my application uses divs triggering a function on the 'ontouchstart' event, I added the 'event' parameter in the function call and added a 'preventDefault()' as the first line of the script.

  An example of the div on my page http://www.sigling.is/IMO/imofishing/home.htm

  thumbsensor script:

      thumbSensor = function(place,state,evt) {        currLR = place;        // what pad/dock        window[place] = state;        // what's its value
  
          /* ------------------------------------------         *  thumbs dock / started / thumb ITA states          * ------------------------------------------ */            if(evt = 'ontouchstart'){ // prevent scrolling                alert('onTS'); // => Testing, and Yes, it is displayed right//                evt.preventDefault();                window.scroll(0,0);                return(false);                        }
  [...]
  }
  

  When I check the console of Chrome using the last option, that's what I get (aside: why the webworks ready event is triggered so many times - about 10?):

  

  Now, I think either I missed something big (probably) or the right way to do it or...
  Can anyone help?

  If you need to replace the touch events in bbUI you have to turn screen by using effects of scrolling data-bb-scroll-effect = 'off' on the part of the screen: https://github.com/blackberry/bbUI.js/wiki/Screens

  Currently iScroll is used to scroll through effects and will contact entries for the scrolling of a screen.

• How to fix the text search feature to help?

  Hello

  I face problems in seeking a text

  (1) when I seek convert .it 'N' all the small "n" in the capital "N".

  (2) If add a special character in the text field it add text... example '&'.it append with & amp...

  http://jsfiddle.NET/ravi1989/wjLmx/24/

  function searchAndHighlight(searchTerm, selector) {
      if (searchTerm) {
          //var wholeWordOnly = new RegExp("\\g"+searchTerm+"\\g","ig"); //matches whole word only
          //var anyCharacter = new RegExp("\\g["+searchTerm+"]\\g","ig"); //matches any word with any of search chars characters
          var selector = selector || "#realTimeContents"; //use body as selector if none provided
          var searchTermRegEx = new RegExp(searchTerm, "ig");
          var matches = $(selector).text().match(searchTermRegEx);
          if (matches != null && matches.length > 0) {
              $('.highlighted').removeClass('highlighted'); //Remove old search highlights  
  
              //Remove the previous matches
              $span = $('#realTimeContents span');
              $span.replaceWith($span.html());
  
              $(selector).html($(selector).html().replace(searchTermRegEx, "" + searchTerm + ""));
              $('.match:first').addClass('highlighted');
  
              var i = 0;
  
              $('.next_h').off('click').on('click', function () {
                  i++;
  
                  if (i >= $('.match').length) i = 0;
  
                  $('.match').removeClass('highlighted');
                  $('.match').eq(i).addClass('highlighted');
                  $('.ui-mobile-viewport').animate({
                      scrollTop: $('.match').eq(i).offset().top
                  }, 300);
              });
              $('.previous_h').off('click').on('click', function () {
  
                  i--;
  
                  if (i < 0) i = $('.match').length - 1;
  
                  $('.match').removeClass('highlighted');
                  $('.match').eq(i).addClass('highlighted');
                  $('.ui-mobile-viewport').animate({
                      scrollTop: $('.match').eq(i).offset().top
                  }, 300);
              });
  
              if ($('.highlighted:first').length) { //if match found, scroll to where the first one appears
                  $(window).scrollTop($('.highlighted:first').position().top);
              }
              return true;
          }
      }
      return false;
  }
  
  $(document).on('click', '.searchButtonClickText_h', function (event) {
  
      $(".highlighted").removeClass("highlighted").removeClass("match");
      if (!searchAndHighlight($('.textSearchvalue_h').val())) {
          alert("No results found");
      }
  
  });
  

  I did this my own problem...

• analyzes XML leaving text after &

  Hi all

  I am pasring an XML file using dom.

  Here is my code snippet

  DocumentBuilderFactory plant = DocumentBuilderFactory.newInstance ();
  DocumentBuilder builder = factory.newDocumentBuilder ();
  factory.setIgnoringComments (true);
  factory.setIgnoringElementContentWhitespace (true);
  factory.setExpandEntityReferences (false);
  factory.setCoalescing (true);
  factory.setValidating (false);
  Document document = builder.parse (in-Stream);
  vecData = new Vector (1, 1);
  Element rootElement = document.getDocumentElement ();
  rootElement.normalize ();

  I used getNodeValue() to retrieve the value of the node.

  The text I'm without the text after &...

  as if I have the value of the node as

  http://imypage.ashx?ImageUrl=http%3A%2f%2fecx.images-123%2fimages%2fI%2f51atrAxEVlL._SL480_.jpg&Widt...

  Can someone help me with this.

  Thank you best regards &,.

  Sachin

  I am getting the http://imypage.ashx?imageurl=http%3a%2f%2fecx.images-123%2fimages%2fI%2f51atrAxEVlL._SL480_.jpg value

  Hi all

  That was the problem with the dom parser...

  I used SAXParser and abel to read all the characters in the string...

• JavaScript doesn't work is not on the page navigation

  Hello

  I have a manual tabular presentation on the emp table. There is a javascript function that calls for the deptno column change. If deptno is RESEARCH (20), then it turns off the field for this employee hiring date.

  
  The same function is called on page load using the threshold:

  $("[name=f04]').change ();

  
  It works fine when the page is loaded for the first time. When I navigate to see the next set of rows (for example, 16 to 30) then the javascript code does not work.

  
  An example can be seen on apex.oralce.com:

  https://Apex.Oracle.com/pls/Apex/f?p=30264:28

  
  Workspace: apex2014

  Username: forum

  Password: abc123

  Application: 30264 Dev2

  Page: 28

  Can someone explain why it behaves like this?

  Thank you

  ZKay wrote:

  I have a manual tabular presentation on the emp table. There is a javascript function that calls for the deptno column change. If deptno is RESEARCH (20), then it turns off the field for this employee hiring date.

  
  The same function is called on page load using the threshold:

  $("[name=f04]').change ();

  
  It works fine when the page is loaded for the first time. When I navigate to see the next set of rows (for example, 16 to 30) then the javascript code does not work.

  Can someone explain why it behaves like this?

  This occurs because the function is called only once the page loads, and therefore affects only the lines that existed when the page is initially rendered. Page navigation performs a partial page of AJAX (PPR) refresh that completely replaces a set of lines of form (including their properties dynamically applied) with a new series with different properties. It is necessary to apply the function whenever a new set of lines is displayed. The best way to proceed is to call the function using an dynamic after Refresh with a dynamic range action:

  Event: After refresh

  Selection type: Region

  Region:

  Action: Run the JavaScript Code

  Scope of the event: Dynamics

  Fire on Page load: Yes

  Code:$('[name=f04]').change();

  Note that rows 13 & 18 in your function cause errors of execution. As I do not understand the purpose of these that I commented on them in order to demonstrate the dynamic action solution:

  function test2(pThis){  // orpheus4192
    var v_item_value = pThis.value;
    var v_hiredate_item = $(pThis).closest('tr').find('td[headers=HIREDATE] input[name=f05]');
    var v_hiredate_button = $(pThis).closest('tr').find('td[headers=HIREDATE] button');
    var currIndex = $('select[name="'+pThis.name+'"]').index(pThis);
    var currRow  = currIndex+1;
  
      //alert(pThis.name);
    if ( v_item_value == '20' ){
        v_hiredate_item.prop('readOnly',true);
        v_hiredate_button.prop('disabled',true);
  
        //document.getElementById("f08_"+[currRow]).disabled=true;
    }
    else{
        v_hiredate_item.prop('readOnly',false);
        v_hiredate_button.prop('disabled',false);
        //document.getElementById("f08_"+[currRow]).disabled=false;
    }
  }
  

  Things are not helped by the mixture of techniques here. The code would be easier to understand and maintain if a coherent approach was followed. It is recommended to always use jQuery to select and manipulate items, then select the items of dynamically across the table from the declarative mode headers attributes, rather than trying to understand the absolute values of ID from the control of the name and line numbers. It's much more intuitive, generally requires less code and is waterproof later insertions and changes in the order of the columns. Potential problems are only the changes to the control type or the column alias (because the latter is generally required in the selector), but these changes are likely to occur less frequently.

  Do not forget that to get the headers consistent and understandable static ID selectors must be applied manually to the IR columns in APEX 5.0...