Family using in Windows Vista Premium 32 bit, I have error "host of transformation for Windows has stopped working" when you turn on the PC.

Original title: Windows Vista 32-bit Edition home

Family Windows Vista Edition using 32-bit - receive the following error message when you turn on the pc.

HOST PROCESSING FOR WINDOWS HAS STOPPED WORKING.

Nobody knows what's happening with pc or how that I should do to fix this problem.  Any help or advice will be

appreciated.

Thank you

EJ

Hello

1. you remember to make changes to the computer before this problem?

Method 1:

If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

http://support.Microsoft.com/kb/929833

Method 2:

Put your computer in a clean boot state and then check if the problem persists

Follow step 1 in the link.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

Method 3:

The issue might be related to malicious software, I wish that you run a full scan using your security software or run a scan using the Microsoft Safety Scanner.

Tags: Windows

Similar Questions

  • Explorer Windows has stopped working when you click FLVfile

    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

    Explorer Windows has stopped working when you click FLVfile / video clip downloaded by REALPLAYER

    Hello

    What version of the windows operating system is installed in the computer?

    I suggest you to see link and check. (That applies to windows vista and windows 7)?

    Error: Windows Explorer has stopped working

    http://support.Microsoft.com/kb/2694911

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  • Explorer Windows has stopped working when you open the folder movies

    Original title: about a week ago my windows Explorer began to close and restart but only when I try to open 1 specific folder... Help

    in the folder my documents, I have a folder called my muvies when I try to access it I get a window that tells windows Explorer has stopped working the TI restarts itself. also, if I try to change how the icons in this folder look same result, but not with anything else. I can access all my other files without problem

    Also, can you check here?

    Start > Control Panel > system and Maintenance > Problem Reports and Solutions > view problem history

    You can right click on some of the mistakes "Stopped working" "Windows Explorer" > view problem details

    What information is given?

  • Explorer Windows has stopped working when I click on the start icon

    Gud afternoon, I have 2 problems.

    1 problem is inCD.exe (which i already clear it but sure my window stopped Explorer working Isit because of this problem stop does not work)

    2nd problem is whenever I click on the icon start at the bottom left and right now I move my mouse select the icon Any1... I had to have this word says

    Explorer Windows stopped working

    Explorer Windows restarts...

    And everything is empty unless I keep trying many times.

    It happen since last night until now.

    So far, I only download Call Of Duty: Modern Warfare 2

    ISIT there is Sthing wrong download this game?

    If someone knows how to Slove this... Please help me... Thank you very much

    Hello

    Check to see if the following is useful.

    Step 1: Run the next Fixit and check if it helps.

    Problems with the overall speed of the system and performance

    Step 2: Search for the issue in a clean boot state. To do this, follow these steps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Let us know the result of clean boot.

    Step 3: Check out this thread that might have a possible solution to your problem.

    Explorer Windows stopped working

    See also:

    http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

    http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

    I hope this helps.

    Kind regards

    Ramata Thakur.

    Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

  • The Windows Shell common DLL has stopped working when you use the joystick havit HV G82

    The Windows Shell common DLL has stopped working...

    I have a gamepad havit HV G82 try to run win 8

    When I go to control panel > devices and printers > game controller settings > properties

    In properties each time I click on Vibration Test tab, I get this error "The Shell common Dll Windows has stopped working"

    When I play games also buttons map correctly

    Any help is very appreciated

    Thank you.

    Hello

    Have you managed to solve the problem by using another approach?

    You can contact the manufacturer of the device to check what they have to say on this issue.

  • Microsoft Windows has stopped working a problem due to the closing of the program

    original title: MICROSOFT WINDOWS has STOPPED WORKING A PROBLEM CAUSE THE PROGRAM to CLOSE__

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • MICROSOFT WINDOWS HAS STOPPED WORKING
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi Aries19,

    Are a. When you this error?

    B. recent changes made on the computer?

    C. when exactly do you get this error?

    D. don't restart your computer / closed applications after this error?

    Let us try these methods.

    Method 1:  [Scan sfc] System File Checker

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. click Startand type cmd in the box start the search.

    2. right click on cmd in the list programs and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    3. at the command calls, the following line and press ENTER: sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved.

    Visit the following link for more information:

    http://support.Microsoft.com/kb/936212

    Method 2: Virus Scan

    You try to run a Microsoft online virus scanner and check if it detects something.

    http://www.Microsoft.com/Security_Essentials/

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

    Method 3: Clean boot

    Clean boot uses a minimal set of drivers and startup programs and helps eliminate software conflicts.

    (a) click Start, type msconfig in the start search box and press enter.

    (b) under the Services tab, check hide All Microsoft Services.

    (c) under the Startup tab, click on disable all, then click Ok.

    (d) If you are prompted to restart the computer, click Restart now.

    When the computer is in a clean boot, applications and third-party services are disabled. Once the computer is restarted, check if the problem occurs right now.

    Check out this link that talks about how perform a clean boot
    Note: Follow all of the steps in the link to know what software are contradictory.
    http://support.Microsoft.com/kb/929135

    Don't forget to reset the computer in a Normal startup once find you what software is conflicting.

    Hope this has been helpful.

    Kind regards
    Bindu S - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows 8 - Photoshop CS5.1 crashes at startup. Error message: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

    Hello!

    I got the student version software Adobe Creative Suite 5.5 Design Premium for several years now.

    When I got my computer Windows 8 I installed the software without problem.

    Last week when I tried to open Photoshop, I get the following error: "Adobe Photoshop CS5.1 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. »

    I disabled and uninstalled all of the Creative Suite and then reinstalled. I am able to open other programs, but still the same message for Photoshop.

    What can I do?

    I found that the problem was with Nik filters I used. The filters have been messing around with Photoshop initialization. I uninstalled and reinstalled the filters and now Photoshop works like a charm.

    It seems that this forum is dead?

    Fortunately, I managed to solve the problems on my own and figured out the problem...

  • SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

    Original title: Windows Explorer has stopped working when I click on network and sharing and also...

    Hello technical savvy people!

    Windows Explorer stops working when I click on network and sharing, and also when I click on system.

    -Otherwise, I rarely get this little automatic.
    But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
    nor know how my system!

    Can you suggest healings?
    Thank you for your attention,
    marlem388

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    Perform the steps from the link below and see if it helps.

    Error: Windows Explorer has stopped working

    Hope this information helps.

  • I have Windows Vista Home Premium 32 bit and I get this "TCP/IP ping command has stopped working" how to fix this?

    I have Windows Vista Home Premium 32 bit and I get this pop windows window advising me "TCP/IP Ping command has stopped working". I click on "check online for a solution", but there is no charge and disappear. I still have the problem, and it's very irritating. How can I remedy outside junking my Tower and buy another?  Thanks for any help on this.

    Hello

    1 did you change on your computer before this problem?

    2. when exactly you receive error message?

    You can follow the methods and see if it helps.

    Method 1
    Use the PING command to verify that TCP/IP is working properly. To do this, ping the loopback address (127.0.0.1) by typing the following command at a command prompt:
    (a) click Start .
    (b) in the search box type command prompt.
    (c) right-click and select run as administrator of .
    (d) type ping 127.0.0.1 and ENTRY.
    If you receive the response of 127.0.0.1, it means that TCP/IP is configured correctly.

    Method 2
    Check to see if the problem exists in safe mode with network.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 3:

    Alternatively, you can try to reset TCP/IP and then check if it helps:


    How to reset the Protocol Internet (TCP/IP)
    http://support.Microsoft.com/kb/299357

    Method 4:

    I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  • The Windows Shell common DLL has stopped working when you use the joystick Frontech JIL 1731

    Original title - Windows Shell common Dll has stopped working...

    I have a Frontech JIL 1731 gamepad

    When I go to control panel > devices and printers > Generic USB Joystick (Game Controller Settings) > properties
    In the properties... Whenever I click on Test of Vibration tab... I get this error (link to image): http://img341.imageshack.us/img341/8023/capture1hce.png
    Please help me with this error and more I can not play with vibration... means I can use the controller to play games, but there is no vibration...:(j'ai aussi tourner sur la vibration dans le jeu...:/)
    Help, please
    Thanks in advance
    My assembled computer specs are-
    Motherboard ASUS M5A88-M
    AMD FX-6100 (3.30 GHz, 8 MB L3 Cache)
    AMD Radeon HD 5450 1 GB
    8 GB RAM
    Windows 8 Pro x64bit

    you are awesome... I have beeen trying several solutions to the problem of vibration, but your technique works like a charm

  • Error "Windows explore has stopped working" when you open the file in my documents

    Original title: opening a file in the folder my documents

    Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?

    Hi dalintn,

    1. What is the file format of the document?

    2. are you able to open documents from other locations?

    3. did you of recent changes on the computer?

    Check if the similar problem persists when you access the document from any other location on the computer.

    Method 1

    This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

    The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

    For more information please visit the link below.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2

    If the previous step fails then I would suggest that you do clean boot and check.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

     

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Explorer Windows has stopped working. No solution on the Internet works!

    Hello

    So, I was faced with the problem of "Windows Explorer has stopped working" for six months. I'm mentally exhausted on the whole issue and I tried each * insert here * vulgar term on Internet solution (no, it does not help to update drivers, run cmd.exe, perform a SFC, install a win7fix and so on.) If there is a solution on the Internet, I tried).

    So this time, I'm sure it's Windows Update which caused havoc. But the problem is, I don't know what update. So far, I only deleted KB2691442, as some people have had problems with this material Win Explorer, but it wasn't corruption update. Yes, I said corrupt, since he is clearly interfering with my system!

    Now, I hope that some merciful soul out there has an idea of what Windows Update causes this problem. I beg of you! I'm losing my mind and I am really angry and disappointed that no hotfix has been filed for this problem.

    Hello

    1. you did it any recent hardware or change the software that caused the problem?

    2. have you run a virus scan to check if infections are the cause of the problem?

    3. When you get the error message?

    Method 1: Follow the instructions in the article. This article also applies to Windows 7.

    Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

    http://support.Microsoft.com/kb/937093

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Method 2: Refer to this article to optimize its windows for better performance:

    Optimize Windows 7 for better performance

    http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

    Note: The reset and optimize the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

    Method 3: We use approach 50 / 50 to narrow down the root cause of the problem.

    See the article below for instructions on how to start your computer in a clean boot state.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

    Method 4: Provide details of the event log to find the cause of the problem.

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    It will be useful.

  • Windows Explorer stops working when you view folders disk hard ext with videos

    Please help with this question that I reinstalled vista windows 3 times so far and the problem persists.

    When I view the files in certain folders of video vignettes of medium or large size, Explorer stops working and restarts. I thought that the problem came from K-Lite Codec pack, but there seems to be a problem with windows itself that I reinstalled Vista 3 times so far and the problem persists. I tried as much as I can't any other questions on this, but am nowhere, and with limited knowledge of computer maintenance, I'm at a loss and need help.

    Change the screen resolution:

    Cannot our Association of video files in my files, it says windows Explorer has stopped working.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/cannot-acsess-video-files-in-my-files-it-says/1bf8b622-5c23-429d-9697-67d0b4747da0

  • Explorer Windows has stopped working when I right click on the files

    When I need to click with the right button on folders, windows Explorer has stopped working.

    up to now, still can't use the right click menu ~.

    Yes, it's the details of the problem.

    Unfortunately, it does not identify the failing module.

    At this point, it may be useful to try to capture a dump of user of the explorer.exe crash mode.

    You can configure Windows to create dumps of user mode. First, create a System Restore Point.

    If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
    "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
    00, 6 D, 00, 70, 00, 73, 00, 00, 00


    After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    More information on the collection of user-mode dumps:

    ("msdn.microsoft.com/en-us/library··· .a 85)

    You can also try to use ShellExView, as suggested by BurrWalnut, to try to eliminate a problematic third-party shell extension.

  • "Windows host process (Rundll32) has stopped working"-when you try to uninstall/remove programs

    Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.
    Please help, I need to uninstall something!
    ---------------------------------------------------------------------
    Windows host process (Rundll32) has stopped working
    Signature of the problem:
    Problem event name: APPCRASH
    Application name: RunDll32.EXE
    Application version: 6.1.7600.16385
    Application timestamp: 4a5bc637
    Fault Module name: StackHash_9629
    Fault Module Version: 6.1.7601.17725
    Timestamp of Module error: 4ec49b8f
    Exception code: c0000374
    Exception offset: 000ce6c3
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 2057
    Information additional 1:9629
    More information 2: 9629b7be96a6d05c3ae74dcb4df31847
    Information additional 3:2716
    Additional information 4: 271690c76c60b0182163ae26acc5f429
    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    Hello

    Method 1:

    I suggest to set up the computer in a clean boot state, then try to uninstall the software.

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/929135

    Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

    Method 2:
    If the problem persists, I suggest you try the procedure described in the article and see if it helps.

    How to solve problems when you install or uninstall programs on a Windows computer
    http://support.Microsoft.com/kb/2438651

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

Maybe you are looking for