"Family Vista premium sp2 installed and now printer will not print.__Error message, ' Page too complex" and blank page "print."

Similar Questions

• Family Vista premium SP2 - NAS - I can see it, can open its highest level, can go through it with the windows Explorer - strangely I can browse it with windows internet explorer 8 - what's up with windows Explorer?

  I have a WD NAS, who has worked through my Explorer windows until recently - now I can access only through Internet Explorer 8 using FTP.

  I use to be able to open the windows Explorer and able to 'network' and click on the NAS and enter my name/password and access all folders and files to the breast. Now I go into windows Explorer and I can see the NAS and I can click on it and enter my name and password, and it shows even the top-level folders-

  I can't do any further due to the standard contextual windows alert, and the message goes between the "network name is not available" and the message "already mapped the drive. I have not noticed a model and did not install anything at the same time. Don't try to do wireless, the NAS is ethernet wired to my router and my router to my computer - no router updates/changes - no updates/changes NAS - no I do not have the mapped drives sitting over there, yes I'm admin on the computer and the NAS server - there is no noticeble change I can find - not firewall , no anitvirus, no microsoft updates - anything good for troubleshooting?

  Anyone has an idea why only windows Explorer fails now to be able to access the NAS, esp when FTP with internet explore works fine? Thank you!

  Hi Dgbjr68,

  Try the following steps.

  Step 1

  Check the behavior in SafeMode with network and post back the result.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2

  You can also try to temporarily disable the firewall on your computer and check the status.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  NOTE: Enable the firewall after trying this step.

  Previous post: the results.

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• HP Pavilion Desktop family vista premium sp2, lost whole Update window. Recovery of the aid.

  Lost all the windows update history.how I get it back

  History of the update is not important, it's the installed updates is important.

  If you renamed/deleted the folder c:\Windows\SoftwareDistribution, that would make you lose your history.

• my computer has a virus. I took it to get the virus removed and now I don't have my family vista premium there Home Basic

  my computer has a bad virus and I had cleaned it but now my family vista premium is not on that but Home Basic is. I tried to activate with the numbers on the side of my computer, but he says that's not good. His NY will not come on either. I went to the trouble and he told me to plug my speakers that have been connected

  Hello

  Take it back to the one who fixed it and demand that they fix it correctly by reinstalling correct Vista edition. namely Vista Home Premium;

  _____________________________________________________

  We cannot help you help to activate the version of vista evil with your home premium product key

  It will not work

  _______________________________________________________

  If you have no luck with the one who fixed it, you need to reinstall vista Home premium yourself or contact a computer technician known to do

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?

• Installed SP2 for Vista now Facebook will not load

  First, hotmail would not work, I have to connect each time www.login.live.com .  I used for any type of www.hotmail.com and would be redirected.  Now it will not redirect, I have to sign in each time.  As mentioned, Facebook does not charge or the other.  I don't see any other update that did these two things stop working, this happened at the same time, then SP2 update.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·    You experience performance issues in Internet Explorer.

  ·    You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·    Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  ·                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also try the Forum from IE:

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista premium sp2 updates fail with error 80070643 dt000

  Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?

  Hi Ruth,

  Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.

  Method 1:

  You can perform the steps described in the article.

  You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
  http://support.Microsoft.com/default.aspx/KB/958052

  If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete

  Note: If you have already completed the steps in this article, you can go to the next method.

  Method 2:
  

  You may need to restart the Office Source Engine (OSE) service

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information helps. Response with status so that we can help you.

• Family Vista premium must reinstall.

  My family vista premium OS needs to be charged and I don't know how to do this on the internet without having to pay for a new. How can I download and use my old key?

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Original title: Edition Vista Home premium

  Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Hello

  Home editions of Vista have not included Fax software.

  Fax only comes with Vista business, full and firm.

  http://Windows.Microsoft.com/is-is/Windows-Vista/send-a-fax

  It is a salary for a Fax program.

  http://www.SnapFiles.com/get/snappyfax.html

  See you soon.

• I had to replace my motherboard and processor, now it will not except my vista OS disk because it is a disc of high level

  My mother had crashed so, naturally, I replaced it with a much better and bigger processor, but now it will not except my Vista OS disk because it is a high quality disc.  My question can get just the windows upgrade version 7, or do I have to get the full version?

  You have to buy a complete new installation of Windows 7.

  Upgrade version of Windows 7 is good to upgrade a previous version installed and activated Windows.

• Reinstalled Windows 7 Home Premium because it was slow, now it will not activate and product key on the label is unreadable

  I'm reinstalling Windows 7 Home Premium on my Acer laptop as it was slow, now it will not activate. Done this before on another acer and worked perfectly, I did a clean install on both. Help

  You will need to buy an Acer restore disk and allows to reinstall Windows 7 Home Premium:

  Please see: Acer Recovery Media purchase program

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

• I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

  I have never installed my MS when I bought my PC and now it will not accept the product key, how can I get a new key

  What "MS"?

  Microsoft is a company, not a product.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Vista Premium home help and support missing by mistake reviews. How can I get that back

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Vista Premium home help and support missing by mistake reviews. How can I get that back. This happens when I try to access it using the start menu of the menu of boot-may have been inadvertantly deleted.

  Download the file here:

  Windows Help program (WinHlp32.exe) for Windows Vista

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5143

• I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open.

  Hello... I have Windows Vista 32-bit, and auto racing seems to be disabled. Before I was able to insert a music cd and Autorun will go up, now it will not auto run open. I looked in the help, but I found nothing on how to enable automatic execution. I speak not autoplay. I need assistance with automatic execution. Thank you!

  original title: AutoPlay

  Hello

  You can fix the error in reading auto/AutoRun.

  AutoRun/AutoPlay does not work when a CD/DVD is inserted
  http://vistasupport.MVPs.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm

  AutoPlay - Autorun does not not under Vista
  http://www.mydigitallife.info/2008/01/14/autoplayautorun-not-working-or-missing-not-open-in-Windows-Vista/

  Troubleshoot AutoPlay
  http://windowshelp.Microsoft.com/Windows/en-us/help/3ab73757-6b67-4e3c-80b1-a75651c7a9451033.mspx

  CleanHandlers - AutoPlay Cleanup utility
  http://WindowsXP.MVPs.org/autoplayhandlers.htm

  See this and also scroll the messages below.

  How to change the settings for AutoPlay Vista
  http://www.Vistax64.com/tutorials/78021-AutoPlay-settings.html

  In the opposite direction might help.

  How to add entries customized AutoPlay in Windows Vista
  http://www.vista4beginners.com/add-custom-entries-to-Windows-Vista-AutoPlay

  I hope this helps.

  Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!

• cannot burn two readers do not recognize the blank cdr - family vista premium

  cannot burn the two deives do not recognize Virgin cdr - family vista premium

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us