Fan brand new Pavilion HPE h8-1120une System (case) is much too loud

Similar Questions

• Very high speed of the HP Pavilion HPE h8-1120une fan

  Hello!

  I got a desktop computer HP Pavilion HPE h8-1120une for about 2 months now and he was executed brilliantly (Windows 7 64-bit).  This morning when I turned on, the computer was much stronger than usual.  Installed the latest BIOS and F10 had started to see that the speed of the CPU fan 4500 rpm and the system fan speed 2500 RPM.  This seems quite high.

  The noise is obviously a bit annoying! Any ideas how to solve this problem would be much appreciated!

  Cheers, Davo

  Hello

  First try this procedure .

  Use a can of compressed air to blow the dust out of the heatsink from the CPU, although with a cold PC it might not solve the problem.

  Try to clear the CMOS memory.

  You might consider trying the B key over the Windows key, and then press the power button.  This could the bios image backup pickup if it is stored on the PC.

  Contact HP support and ask the ROM/BIOS recovery procedure. Recent HP PC will store a backup of previous BIOS level.  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Pavilion 15 bj000nh: very low wifi on the brand-new Pavilion 15 bj000nh

  Hello everyone, I have a problem with my new laptop purchased 15-bj000nh HP Pavilion, a few days ago.
  The wi - fi connection is too low, that if I keep the PC one meter away from router I get only 3-4 bars of 5 in the connection properties and if I go to 10 meters and a pair of rooms up to now I get 1 to 2 bars of 5 and frequent disconnections. Also the speed breaks I see, and close to the router is too not at the maximum.
  Otherwise, my old laptop HP 6735 s with Windows 7, never had problems in the same position (10 m) and keep 3-4 bars no disconnections. I checked the resistance of the router wi - fi with mobile phone too (not), I tried all the solutions offered by HP support assistant on PC and on the HP support site also, but with no result... I have the card (802.11n) Broadcom software upgreaded. IT helped a little, but even with the latest software, my laptop has connectivity problems. I can't believe that a new NB may have a weak connection... I have some other ideas of a HW fault...
  Thanks for your help.

  No wireless card will work well with only a single antenna and a dual band (2.4 and 5 ghz) won't work at all on a single antenna... An aerial cable can be added, but it takes almost complete disassembly. I doubt that the Service would do. I wish that it is something that I could tell you. A usb wireless dongle is your best option. $ 15 on amazon.com and you will have good reception at the cost of losing access to the usb port.

• We have brand new Pavilion g6 and all of a sudden on startup, it is no longer can find hard drive!

  It looks similar to a post, but with another laptop.  We get "boot device not found" and the instructions to install an operating system.  He installed Windows 7.  What do we do?

  I tend to agree with David's response above. If you are in the place of purchase return period, bring in replacement. If not Contact HP for warranty repair.

• EVGA GeForce GTX 650 desktop computer HP Pavilion HPE h8-1120une Ti

  I have had this computer ( http://support.hp.com/us-en/document/c03000614 ) this computer for about 2-3 years and I plan on updating my the 530 gt graphics card to the gtx 650 ti ( http://www.amazon.com/EVGA-GeForce-Dual-Link-Graphics-01G-P4-3650-KR/dp/B009KUT322/ref=sr_1_3?s=elec... ) that my old card can't handle modern games for example battlefield etc. 4.

  I'm not an expert in the technology when it comes to the installation of pc hardware. If someone could give me any insite on how this can be done or if my pc case will be ENOUGH space or that it is compatible with my motherboard / bios of the computer/etc for this graphics card!

  Thanks for your time

  John, welcome to the forum.

  The video cardback in your case.  It is 6 "x 4,38".  However, the power supply unit (PSU) in the computer is only 300W.  The card requires at least a 400W POWER supply.  This would require an upgrade of the PSU, as well.  In addition, the card has a connector 6 extra pins.  The current PSU will not have the necessary cable for extra power.

  I like to use Newegg to review components.  Normally, they have the best section 'Technical data' for the products they sell.

  Here are requirements for the battlefield 4.  You have reason to believe that a video card is your weakest component.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• VAIO T Series - much too loud CPU fan

  I just got 13 inches T of sony.com

  It's fantastic. I really like this lappy... except for the noise of the fan.

  On a very light workload, fan made a noise too strong...

  It not blowing really hot air. It blows just cool air and lappy made more heated at all. It's actually very cool.

  I have absolutely no idea why the fans are blowing like that...

  Bridge of Ivy processor low voltage (i5-3317u) are supposed to be very energy efficient.

  Please solve this problem of fan speed, otherwise, I'll return this lappy fantastic in a few weeks.

  
  

• Pavilion HPE 440F: need new video card for HPE-440F

  Salvation;

  The ATI Radeon HD 5570 in my Pavilion HPE 440F appears to be dead, or is doing. The fan has stopped working and I think the map has overheated.

  I'm running Windows 7 x 64.

  Anyway - I would like to install a new card - and best video. It is, since it is HP, I bet that not all cards are compatible with my system.

  For example, I can buy an ATI Radeon SR-290, which gets much higher than my current card pass mark. Or maybe even a NVidia card might be a better value for the money.

  Can someone point me to a list of compatible video cards for my system?

  Thank you

  Ubuntu_Kid

  p.s. My Linux box is not an HP.

  Ubuntu_Kid, welcome to the forum.

  The problem you are having is, most of the newer video cards require UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  Your computer was released on August 26, 2010.

  Some of the manufacturers have developed a VBIOS that will allow their cards to work with legacy BIOS.  I know that the EVGA has done with some of their cards.  I suggest to call their Tech Support (1888-880-3842) to see if they have a card that will work with your computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• Processor and fun of rear cooling fan runs at full speed on Pavilion HPE h8-1120it

  Hello, since yesterday when I turned on my HPE h8-1120it HP Pavilion the CPU fan and rear fun cooling are always rotating at high speed, and they never stop. I have nothing no hardware changes, no change in software. Two days I will I work all day without problem, I turn off as usual the PC, I'm going to bed and then yesterday morning I turned on and now I have this problem. The PC is brand new (I bougth it about 1 month ago). There is no problem of temperature (now I 19 ° C on my computer room).

  Read another similar post I figured might be a bios problem. The version of the bios is 7.11, I tried to see if there is an update of canno't ' t there, but I find an update of the bios for Pavilion HPE h8-1120it.

  I burned a CD with the hardware HP Vision Diagnostic and I run the pleasure of tests and they all passes. During these tests, the pleasure seem to achieve the right speed in the progress of the test.

  I noticed this strange thing: when I bought the PC I immediately activated in the bios the use of VT to use hardeware virtualization with VMWare player. Yesterday, I found this setting changed and disabled and it's very strange because I did not change the values in the bios.

  What can I do? The noise of the fans at full speed is impressive, that I can't work on these conditions!

  Thank you

  Davide Angeli

  Hello

  There are not many fans rated at 4 000 rpm. With this type of fan RPM coupled with your observation that VT missing then your PC seems to have a problem.

  Maybe it's time to contact the HP Support.

  HP support number is 800-474-6836 or 800-HPINVENT or online here.

• HP Pavilion x 360: brand new HP X 360 11 - k107na Blue screen DRIVER IRQL NOT LESS or EQUAL (rtwlane.sys)

  Brand new laptop hangs. A blue on the screen with the error DRIVER IRQL NOT LESS EQUAL (rtwlane.sys) OR 5 times, and has locked up twice ctrl + alt + delete compltly don't work so had to turn off via the power button / stop. Windows update not installing in spite of being connected to the internet.

  Hello

  Thanks for posting in the HP Support forum. Welcome!

  It's BSOD - Windows self-protection function sort. If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. What you describe could be incompatible with the Windows driver (more often) or because of material issue (rarely).

  In your case, this seems to be the problem - your network drivers are outdated and must be updated to fix the problem.

  Option 1:

  Visit the HP website for your model > http://support.hp.com/gb-en/drivers/selfservice/HP-Pavilion-11-x360-PC-series/8499314/model/8942286 , select your operating system version, download, choose the network drivers, download and update

  Option 2 (recommended):

  If you don't have it already, please download and install HP Support Assistant from this url: http://support.hp.com/us-en/document/c03467905

  Use to check and apply all updates of drivers

  Additional tips:

  -If you have installed McAfee software, then uninstall it and possibly run this tool to uninstall McAfee > http://us.mcafee.com/apps/supporttools/mcpr/mcpr.asp

  -Use the built-in Windows Defender > http://www.howtogeek.com/220232/how-to-use-the-built-in-windows-defender-antivirus-on-windows-10/

  Will you please pass your comments and let me know what happens.

  -For the failures of Windows updates, try > http://windows.microsoft.com/en-us/windows-10/windows-update-troubleshooter

• Need drivers for my new HP Pavilion HPE ethernet

  Hello, I just bought a new HP Pavilion HPE desktop computer (3 days).  After that I got the first time I turned it on it only connected via the wireless network card.  I then did a clean install of windows 7 Ultimate edition (because I had it and it's better than home premium).  Well I can connect through the wireless card but want to connect with the ethernet.  The Device Manager shows SM Bus controller and Ethernet controller drivers are not installed.  I contacted HP support and they could not help, they said I have to do a full install HP operating system provided with the computer because they knew not where were pilots and no guarantee that would work.  The motherboard is made by IPMMB-FM.  I tried Google and found nothing.  I'm looking for help to find these drivers.  I'd appreciate any help that is offered.

  Possible breakthrough...

  While HP does not seem the W7 64-bit driver available (small oversite on their part), I think I have found a driver on the Atheros website.

  Go to the Portal client Atheros and select AR813x_AR815x_v2.0.14.15_WHQL or AR816x_v2.0.14.15_WHQL under the headings AR813x_AR815x or AR816x. They are in. RAR format, extract the driver by using WinRAR or similar!

  Frank

• HP Pavilion 17 Laptop Touch t: brand new out of the box HP Pavilion 17 t Touch M7H91AV laptop is so slow

  Last night, I took my laptop HP Pavilion 17 t Touch brand new out of the box and it is so slow.  The startup is slow.  All operations running slow.  The use of the internet is slow.  I tried to transfer files from Carbonite on this new computer and just the process of realization of this installation took me a half hour.  This morning I had to reboot and it took 5 minutes.  I only know enough about computers to be dangerous, so I don't mess with many settings myself.  This performance unacceptible on a new computer.  This is certainly the slowest computer I've ever owned.  All solutions that anyone can offer (as a reminder, I need instructions step by step)

  MLubb

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about serious problems with your HP PC brand new and wanted to help.
  
  Since it is a machine relatively new, instead of hurt for hours to fix yourself, why not just let HP fix it - for free!
  
  You must contact the HP Customer Support directly so they put you in contact with HP Tech Support to see what they can do on the diagnosis and repair of your machine remotely.
  
  I did recently, and HP technology was able to remotely access my PC on the Internet and to make the necessary repairs.
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  Please click on 'Accept as Solution' on the post that solves your problem to help others to find the solution.
  Please click on the symbol of the thumbs-up to the left of the answer key to say thanks fopr my help.
  ========================================================================

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• brand new officejet pro 8600 e - all - in - one, ink system failure msg, msg lack cartridge...

  told to turn off the printer after ink system failure msg, but then gives a cartridge can fail to msg and said that the printer can be damaged if turned off.

  The printer is brand new. I print a dozen test pages fine... haven't touched inks since installed first. When I open the cartridge access door, inks/heads move to the opening, so I can't reinstall the cartridges. Help!

  The document here can help.  You'll need temporarily ignore the message about not to turn off the printer...