Fan has stopped working on the satellite

I've had the laptop for jusy 7 weeks and the fan has stopped working. It always seemed that he ran too to what looks like at full speed almost constantly, but now its stopped.

I just tried to call the helpline and ended up leaving a message to be recalled. They work on Sunday?

How long they tend to take to fix these things?

Hello

I put t know 100% if they work on Sunday, but I presume that they don t
However, can you please tell what camera do you use?

I can t believe that if fans stopped working then the laptop should automatically stops or the CPU overheats! It is very dangerous because the laptop and the motherboard may cause damage.
So if the fans don't turn you should not turn on the laptop.

But maybe the cooling modules run only with the lower speed?
This is not unusual. The BIOS and the energy-saving control the speed of the CPU and cooling modes. Fans should not run with maximum efficiency if the temperature does not increase.

Tags: Toshiba

Similar Questions

  • Satellite A500 - 17 X - Fan has stopped working and the warning message

    As the title says.

    I turned on my laptop today to hear him roar, and then it is simply stopped. I get this warning on every 20-30 seconds:
    WARNING: a problem with the cooling system has been detected. Please turn off the power immediately and return it for service.

    Instead of saying "then put it back in service," I can do to try to fix myself first?

    Thanks in advance

    Mike.

    Hey Buddy,

    Other similar topics I found information that the fan control has been optimized with the latest version of the BIOS. I put t know what version of BIOS you have but most recent, a satellite A500 - 17 X (PSAR3E) is 1, 90 - WIN and can be downloaded here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    I hope that helps! :)

  • ODD has stopped working on the Satellite Pro A200

    I have a Satellite Pro A200 - PSAE1E.

    The CD/DVD was working fine and then stopped. I put in another CD and it went through the process of trying to find - but could not.
    It ejects the disc. I tried with other CD in the same direction. Yellow light works during the research process.

    I tried to remove the CD from the Device Manager and remove entries of regedit (as suggested on another thread) all without success.
    The computer is a little over a year old and I have no recourse to assistance centers as I live in West Africa.

    Can anyone offer any suggestions?

    Hello

    Is it possible to boot from the recovery disc?
    I mean the CD/DVD drive reads the original disc Toshiba and it of possible to read other CD or DVD from different manufacturers?

    If all the other disks are not readable then the question looks like a WEIRD error and in most cases the STRANGE must be replaced.

    PS: Please note that if you try to boot from the recovery disc then start a recovery procedure will format the HARD drive and reinstall it the entire image of Toshiba.

  • Optical disc drive has stopped working on the Satellite a series

    My 10 year old son has a Toshiba laptop that he uses to play CD games, watch DVDs, etc.
    A few days ago he complained that he can no longer play its CD and DVD s.

    When I checked it, I found that the PC DVD R/RW e drive is full when I right click on it and open properties. It says 0 bytes remaining and the pie is complete without space. I don't know what happened, so is my son. You see, I'm not good with this stuff, please someone tell me what to do. Thank you...

    Moreover, our laptop is only a half a year old. It was purchased new.

    Hello

    To be honest I'm not quite sure what happened but maybe it s m just a problem of windows registry.

    First of all I recommend you to remove the CD/DVD Device Manager drive.
    Then leave the appliance Manager and start recording (in RUN type regedit).

    There, you have to completely remove the Upperfilters and Lowerfilters from the following registry key values:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    After restarting the device, wait for Windows to recognize the CD/DVD drive and retest the CD/DVD drive

    See this for more details:
    http://support.Microsoft.com/kb/270008/en-us

  • HP Pavilion DV6: at startup BIOS showing CPU fan has stopped working, but I checked the fan is in good condition

    Hello

    I bought my HP Pavilion dv6 laptop 2011 as it starts a is overheating, freezing windows with noisy fan sound etc... but now, on information in BIOS boot indicating that the CPU fan has stopped working so immediately, I checked that I couldn't hear any noise from fan and no symptoms as fan works so I disassembled my laptop and removed CPU cooler fan only. Simply with the help of the battery, I checked the CPU fan it is running perfectly alone. but it does not work with the laptop.

    Please help me and guide what is the cause of this problem and how to solve this problem.

    Gassab

    HI @Kartic

    Welcome to the HP Forums!

    This is a fantastic place to find answers and suggestions!
    You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

    How can I find my model number or product number?

    I understand that since you had the laptop he had an overheating problem with a loud fan noise that causes freeze it.

    Recently, you have received the message that the CPU fan has stopped working and you couldn't hear the rotation of the fan to the top.

    You have removed the fan and checked, but the fan works.  It is possible that the connection was not safe in Notepad.

    Here is a link to an overheating and Auto Shutdown problem troubleshooting.

    Have you checked for an update of the bios of your laptop. You have provided the series of laptop you have, but not the exact model, so I'm not able to check it for you.

    You can run the Wizard to help HPin order to facilitate this process.

    Like a bios update has the potential to cause damage, you can contact HP technical support using this procedure.

    Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

    World wide phone holder

    Here is a link to the guide to maintenance and Service Guide HP Pavilion dv6000 Notebook PC for your laptop.

    You can replace the thermal paste on the processor. Here is a link to a YouTube video on this process.

    How to apply thermal paste

    Good luck!

  • Cool fan has stopped working - laptop HP Pavilion dv7-6c95dx

    The colling fan has stopped working properly. After research, I learned that it is a COMMON problem for this laptop in particular. Of course my warranty just expired 2 months ago... so...

    I need info on this exact model fan, with that I need to replace it, as well as instructions on how to do it. It is a HP design flaw I think personally that you need security regardless, but I know that will never happen... so let me your useful insight in the matter. Thank you very much.

    HP Pavilion dv7-6c95dx laptop

    Here are the specifications of your HP Pavilion dv7-6c95dx Entertainment Notebook computer. Here is the HP Pavilion dv7 Notebook PC - Maintenance and Service of Guide for your computer. According to the specifications and guide, it seems that HP part #666392-001 is the replacement part you need.

    Disassembly instructions start on page 41 of the maintenance and Service of Guide.

    Please send BRAVO

  • Speakers have stopped working on the Satellite a series

    I have a laptop satellite - not sure what mono - speakers have stopped working and are unable to turn back.

    Have tried checking volumen and none controls mute buttons are slected. tested and it says ther no problem but still no sound. have uninstalled the driver and reinstalled - what else can I try?

    > have a portable satellite - not sure that we
    Roll on Notepad and check the label at the bottom of the unit. You will find the name of the laptop!

    > Speakers have stopped working on the Satellite a series
    Open the Device Manager and check if no yellow exclamation point appears. If you can see this yellow sigh perhaps the sound card driver is not installed correctly.

    In addition, please plug the headphones to your laptop and check if you can hear anything through the headphones.

  • My bi-ecrans Setup has stopped working with the latest update of Windows

    My bi-ecrans Setup has stopped working since the last windows update.  The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640.  I installed the latest drivers for the video card and two monitors.  I have everything down, powered, entretienavec left for a few minutes and fed up, nothing.  It has been like that for a few days now.  Any advice would be very useful,

    Thank you

    Tyler

    Details:

    PC: HP Compaq 8200 Elite

    Graphics card: AMD Radeon HD 6500 Series

    First monitor: ViewSonic 2030

    Second monitor: Dell 1908FP

    All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.

    Latest patches from Windows Update killed my dual Setup monitor:

    Update of security for Microsoft Office PowerPoint 2007 (KB2596764)

    A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)

    X 64-December Windows malicious software removal tool (KB890830) 2011

    Update security for Windows 7 for x 64-based systems (KB2620712)

    Update of security for Microsoft Office PowerPoint 2007 (KB2596912)

    Update for Microsoft Office Excel 2007 (KB2596596)

    Update of security for Microsoft Office Publisher 2007 (KB2596705)

    Update of security suites for Microsoft Office 2007 (KB2596785)

    Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)

    Updated for suites Microsoft Office 2007 (KB2596651)

    Update security for Windows 7 for x 64-based systems (KB2639417)

    Updated for suites Microsoft Office 2007 (KB2596789)

    Update security for Windows 7 for x 64-based systems (KB2619339)

    Update for Windows 7 for x 64-based systems (KB2633952)

    There is no update stated in your post which could have implications on your graphics card, or its driver.

    Have you installed the latest graphic driver AMD in the AMD site?

    http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx

    NB this link is the 32-bit win7 driver.

  • I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

    I can't change my PDF even if I pay for the plan of creative cloud. It seems that it has stopped working over the weekend.  Someone knows why?

    I worked on it. For some reason, he opened my PDF in Adobe Reader DC and DC Pro not Adobe.  Once I have it open as a Pro it works beautifully and I could edit.

  • 5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »

    5.7 LR "Adobe Photoshop Lightroom 64-bit has stopped working" in the library when I type "import...". »

    I have 31K photos in a catalog.  It's the only catalogue that I use.  Recently, today I imported 84 photos on the same folder I try now to import 200 +.  Adobe Epic Fail!

    Delete the folder "Lightroom 5 catalog Previews.lrdata" and the folder "5 Lightroom Catalog Previews.lrdata Smart" and disconnected from my USB hub, but not my two external hard drives USB.

    I import now.

    Thank you Adobe for the best photographic catalogue in the world system!

    -Love

    Steve

    http://stephenjungphotography.SmugMug.com

    Live from the "capital of the world Live music."

  • I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?

    I get an error at the start of the ambient light.  Windows indicates the RL has stopped working and the banner "catalogue Lightroom-opening: OYL6BMP.» LRCAT displayed?  I reinstalled LR but no change.  Anyone can shed light on this issue?

    Gary

    The only effective solution is to reset the file preferences... it has been damaged by trying to create a catalog with the invalid jpeg.

    The instructions to reset the catalog are here: given to zero (or "Screw up") the preferences of Lightroom - Lightroom Forums file

    When you have done this, place you and double click on the correct catalog and LR should then start OK.

  • "TosBtMng has stopped working" on my Satellite A200/H01

    I have a Satellite A200/H01 with Vista Home Premium 32 bit.
    A few days ago I started up this message at startup: "TosBtMng has stopped working" I have updated all the BT device drivers in Device Manager, but it did not help. I then installed the battery BlueTooth (v64000T_20090324_x32.exe), and this did not help, either. In fact, the error "TosBtMng has stopped working" message kept coming upward on several occasions, even when I tried to shut it down.

    Could someone help me please?
    I use BT to sync with my mobile phone (Nokia 6120 Classic) via PC Suite from Nokia 7.1.30.8 worm. I was using the computer BT without problem for 18 months now, until last week.
    Thank you very much. Andrew

    Try the new Bluetooth stack v6.40.02

  • ConfigFree has stopped working error on Satellite L850-13R

    Can someone help me with this and also tell me about.

    Everytime I turn on my laptop I get notification message "Configfree has stopped working"... "try to get the solution on the internet... "and I don't know what is the problem and how to fix it.

    I have Toshiba Satellite L850-13R, i7, using Windows 7 Starter.
    Can someone tell me what is this error and how to fix it? and, also, my laptop is very slow since I got these notifications. I scanned and there are no threats found...

    Thank you in advance...

    I m not very well why the Utility of Toshiba ConfigFree has stopped working, but I can tell you how you can solve this problem.
    I think simple installation ConfigFree could solve this annoying problem.

    How the product?
    First download easy all the utility driver page ConfigFree Toshiba UE
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU
    Please pay attention to the version. There is a ConfigFree utility for 32-bit system and 64-bit.

    After the ConfigFree utility has been downloaded, uninstall the previous software installed.
    In Control Panel-> programs & features, you should find the ConfigFree
    After the tool has been uninstalled, restart the laptop
    Then unizip the package downloaded and start the installation.
    Reboot once more.

    ... That's all :)

  • Bluetooth has stopped working on my Satellite P105-S9722

    I have a Satellite P105-S9722 and everything seems fine except the occasional extreme overheating it stops. In any case, my blutooth has stopped working.

    Here's what I've done so far:

    1 formatted, reinstalled clean (running the toshiba Vista business upgrade)
    2 tried to use the most recent bluetooth Vista drivers fron this site & Blutooth monitor 3 w / stack windows

    I tried several times without success. Here's what's happening.

    When I install toshiba stack, it is all the way to the grip and "install bluetooth driver". I get an error message on a USB device unknown who breaks down and will not be installed. It is under the TouchChip Fingerprint coprocessor. In addition, with the Bluetooth Monitor 3 installed, has no "BLUETOOTH" category in ther CP to set properties

    That's all. It hags just here and bogs of the bridge I have to restart the system.

    Any suggestions?

    Thanks in advance!

    If the laptop is overheated, you must remove the dust from the radiator. You can use a can of compressed air to blow off the dust.

    Have you tried to use the battery Microsoft Bluetooth standard instead? To use it, you must uninstall the Toshiba Bluetooth stack, then just install the Bluetooth screen

  • Zino 400 has stopped working; replaced the motherboard, worked for a minute then was arrested again.

    My 400 Zino has stopped working; There was no signal on the screen, , but the hard drive and fan turn. (edited by OP 03/06/15, 3:07 pm AND). I assumed the problem was on the motherboard, so I bought a motherboard OEM reconditioned. After the replacement, the boot sequence begins, which is encouraging. I entered the Service number, and I've sailed through the Control Panel, the screen went black. Again, only the sound is the fan. I can turn it on with the power button, but the only way to turn it off is to unplug.  Would it be the processor or is it possible that the new motherboard is bad? What should I do?

    Miss_Gail

    [What is the color of the light of the power button, is it solid or flashing ' see page 36]?

    Is it "beeps". If there is, how [see page 33]?

    http://downloads.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-Zino-hd_Setup%20Guide_en-us.PDF

    Bev.

Maybe you are looking for