Fan/Heatsink Assembly thermal Ribbon

Similar Questions

• G62 - b45EM: compatibility FAN HEATSINK CPU Cooler

  Hello

  My cooling system no longer works. I'm in the process of buying a new one. During my research, I discovered that alternative parta of coolers CPU model number differ. Some have 606609-001 other 612355-001. But in any case, he says its for series G62. I wonder - is it important?

  More precisely, the CPU's cooler for G62-b01sl G62-b45EM compatible?

  Thank you for your response.

  Here are the specifications of the

  G62-b45EM:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02556539

  You have switchable graphics with 1 GB discrete card.

  Repair manuals

  This is the correct fan/radiator module:

  Discrete systems 606014-001

  http://www.eBay.com/ITM/new-for-HP-Compaq-G62-CQ62-G72-CPU-Fan-Heatsink-606014-001-free-thermal-paste-/251767167945?hash=item3a9e7e1bc9:g:iwgAAOxyrYFR0H7y

  

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion dv7t 6100 - LM726AV: replacement of heat-sink/fan using the thermal pads and thermal paste/paste

  Hello

  The fan on my laptop died so I am trying to replace the fan and the heatsink unit. The manual that I use specifies that thermal grease should be used on the cpu and heat pads must be used on the graphics processor and the capacitors.

  The arrival of the new fan it came with heat pads on all relevant areas of the sink as a tube of thermal grease. When I removed the old fan, thermal pads have proved only on the capacitors and the components around the GPU and that thermal grease was used on the CPU and the GPU.

  My question is: how this part must be installed? Should I remove the fron pads thermal heat sink that covers the processor cpu and graphics and do not use the thermal grease in these areas? Or the thermal grease can be used here and let the thermal pads on the heat sink?

  Thanks for your help - thank you for the advice/opinions in this case.

  You can remove the protections and pass with the dough so but only f, you are sure that the metal on the core processor and graphic is in solid contact. And there, I meant it touches and also has a lower compression. For me, the thermal paste is superior coolant and should be used on really hot spots. However, if the metal is not full, solid contact you run the risk of overheating.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replacement Fan/Heatsink to cpu for p6-2330

  HP Pavilion Desktop P6-2330 with fan cpu Cooler Master (#FA08025M12PLA) caused "511 cpu fan not detected."  Fan radiator dead, still breathing.  HP bought April 2013 and under warranty.  Trying to avoid the hassle of the guarantee and the purchase/replacement of installation.  Unfortunately replacements no longer exist.  The Cooler Master fan was DC12, 0. 45A, 80X25M.  Cannot find anything for the game.  Big box and supply great online companies - duper fan may not happen what anyone close.

  Legitimate suggestions would be really useful.  Thank you

  I'm listening...

  IM-LISTENING wrote:

  HP Pavilion Desktop P6-2330 with fan cpu Cooler Master (#FA08025M12PLA) caused "511 cpu fan not detected."  Fan radiator dead, still breathing.  HP bought April 2013 and under warranty.  Trying to avoid the hassle of the guarantee and the purchase/replacement of installation.  Unfortunately replacements no longer exist.  The Cooler Master fan was DC12, 0. 45A, 80X25M.  Cannot find anything for the game.  Big box and supply great online companies - duper fan may not happen what anyone close.

  Legitimate suggestions would be really useful.  Thank you

  I'm listening...

  Hello

  You can use any fan that will fit the heatsink. Make sure that it cools pretty processors AMD warms up more those Intel a good cooling is necessary. You could also buy a full set with a heat sink which suits your FM2 socket like this: http://www.amazon.co.uk/Cooler-Master-Hyper-212-120mm/dp/B0068OI7T8/ref=sr_1_1?ie=UTF8&qid=1384032717&sr=8-1&keywords=hyper+212+cpu+cooler

  Just make sure that the case of Fund is large enough to hold the cooler in.

  http://www.eBay.co.UK/SCH/i.html?_trksid=p2050601.M570.L1313.TR0.TRC0.Xamd+CPU+fan&_nkw=AMD+CPU+fan&_sacat=0&_FROM=R40

• Fan Heatsink of heat/cooling A25-S307 problem

  I have this model A25-S307 for more than 2 years recently I started noticing that my laptop will heat up soon. Although the cooling fan starts, it doesn't do any good. And sometimes even if it's very hot, cooling fan not kick.

  Any suggestions on how this can be corrected.

  Thank you
  BKM

  Hello

  Yes, you are right, you have a heating problem.

  As a first step, you can try to de - and reinstall the Toshiba Power Saver and sett it by default (the energy saver manages the FAN speed!). Then you can check your BIOS settings. Also the default Sett! After that, you should observe that the FAN in the laptop is running. If this does not resolve the problem in my opinion some hardware may be the fan is damaged!

  The best way to avoid damage to the CPU is to contact a Toshiba Service partner.

  As far as I knoe the A25 is an American model, so I have to go to
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  and click on repair center.

  If you live in Europe, go to http://eu.computers.toshiba-europe.com - Support & downloads - find an authorized Service partner

• Can I change Fan/Heatsink unit?

  Hallo,

  I have a R40 2682KCU which is about 5 years old and he began to make occasional horrible noises, which I am sure is that fan because it seems to run more hot than usual. The fan still works and the vents are clear and wonder if I can replace the radiator fan or must it be done by Lenovo or authorized service center.

  Thanks a lot for any advice,

  Lagoonius

  Thanks Jade!

• The noise of the fan DV6936us & Design

  The fan on my old DV6936us of 9 months from making a racket and vibrations that could be felt through an office. Initially tapping the fan installed zone it down but in the end nothing done and noise can be heard by a Chamber now. Finally, I downloaded maintenance manual and took the machine hand following the path of the Fan/Heatsink Assembly (what a PITA!). I didn't remove the radiator together (do not have time yesterday) but was able to remove all but one of the small screws holding on the fan cover and clear it up - not quite enough to remove the blades, but enough to eliminate rabbits of dense dust that had grown inside the fan cover. After reassembling, everything still works and the fan is relatively quiet again (without noise or vibration).

  I know this is a "consumption" of quality machines, but I had other laptops in the same circles without their fans for years is polluted by dust so bad. Is this due to poor design or is it just that this machine works more hot that older fan should run more? How many times should I rinse the fan with compressed air?

  @ Gary_R

  You can also check your time with Everest or HWMonitor. If you want to be then time are low.

  You can try compressed air as it and clean all the vents with her. Laptop must be powered off and without battery pluged in there.

  This will give you a method without disassembling your model.

  Full clean is recommended once a year with putting new thermal material on components.

• 90 b error - how to order a new fan

  I have a Pavilion notebook m7. The fan is burnt. I got the error of 90 b at startup. I want to just order the part. I know that the fan is shot. There are a number of pieces?

  Thank you

  Phil

  Check out this Guide Service and maintenance.

  Page 26 - (Item 12) Fan/Heatsink Assembly - Intel processor and a graphics subsystem with UMA memory.

• Fan cooling 90 b on Windows 7 Pavilion dv6-3225dx error

  Hi, I have a HP Pavilion dv6-3225dx, winddws 7 64 bit laptop for over a year and I started to receive a black screen at startup which said cooling fan error 90 b problem.

  The problem started when I was still at school and I had to watch this long movie for an assignment.

  The error would only be the beginning on all 2-3 weeks or so, one or two times, and especially when I turn it night and turn it on again 12 hours the next day later. I tried to update the BIOs from HP support assistant menu, but twice the update failed once it restarts after a update.

  When the laptop starts it starts smoothly without problem, and the fan does not strong when the error screen appears.

  A friend told me it might be dusty inside the fan or the fan needs to be replaced. But I thought I'd ask around on the forum to see if anyone has a solution (maybe something is not installed?)

  the BIO system version is F.29

  Thank you!

  Hello:

  Your friend is correct.

  I would try cleaning first cooling system since it is the best thing to do.

  Unplug the computer and remove the battery.

  Get a can of compressed air at your local office supply store.

  Put a toothpick in the air intake fan and place it between two of the fan so the fan blades don't pinwheel when you spray compressed air, as setting the fan will ruin the bearings.

  Spray the air in two ways - through the socket of the fan and the exhaust fan vents. Do a couple of times until you see no more than dust coming out ducts.

  Failure to remedy the problem then maybe the fan/radiator Assembly will be replaced.

  Looking at the specifications of product for your laptop, it seems that the Fan/Heatsink Assembly you need is

  603690 001.

  Consult the service manual, Chapter 3, page 21 for more information and Chapter 4 for the procedures for removal and replacement.

  http://h10032.www1.HP.com/CTG/manual/c02657339.PDF

• HP DV7-4020sa fan - cleaned noise and still make the noise

  Hello.

  I need help with my laptop. It is a DV7-4020sa.

  Since I bought the laptop (used) the fan made a horrible squeaky sound. I decided to fix it today so dissambled laptop computer and gave the fan a good clean and also put some wd40 on the axis of the fan.

  Unfortunately, after reassembling, the fan still makes noise. It's strange because if I pull the screen/lid slightly towards me, it stops the noise, and also if I apply pressure to the lower part on the base where the fan is located.

  Should I buy a new/submitted fan new to replace it, or is there a fix I can apply?

  Thanks in advance

  Hello:

  More than likely, the bearings of the fan are in ruins, and the only solution would be to replace the Fan/Heatsink combo.  The fan is not sold separately.

  Your model equipped with a discrete video adapter according to the product specification, so you should be the Fan/Heatsink Assembly which, according to the maintenance manual, includes hardware replacement, intended only to computer models with graphical subsystems with discrete memory.  Part # 606575-001 HP.

  It's quite expensive at $84.28, but I do not buy a used assembly (if you could find another one) and eventually encounter the same problem on the line.

  http://h20141.www2.HP.com/hpparts/Search_Results.aspx?mscssid=00CD1EC2A53945949E211F17A82B64FC&SearchIn=PartNumber&SearchPN=606575-001

  Sometimes this happens because users simply spray a jet of compressed air into the fan intake and exhaust air vent covers, which is perfectly OK, as long as you place a PIN or something that can get through the protection grid, between two of the fan blades to prevent it from turning.

  It is not a contest to see how fast or strong you can do this fan to lament when cleaning, because that's how the bearings get ruined.  They are delicate and only designed to handle a certain RPM range.

  One can only imagine how far beyond this tolerance range fan bearings can go, when they are subjected to a jet of compressed air of a jet!

• Dell studio 1558 fan noise problem

  Hello dell.

  I wonder how many people got prob with studio dell 1558, just google and found most of them (all) having prolem with the dell studio 1558 fan noise.

  What happens in my case:

  The fan noise was ok before a few weeks ago, and he started 2-3 weeks back. aaftre fans of 20-30 sec noise suddenly and during idle sound Inc. is not normal/quiet a bit different than usual.

  The fan noise is really annoying and it constantly happens not even a minute, it stops.

  So in my case I think that it may be hardware fan prob because I wasn't this prob when I bought this system may be fan is going to jam in a near future?

  It's my system config:

  Studio 1558:

  : Processor Core i3 M350 2.27 Ghz processor

  RAM: 4 GB

  Gfx card: ATI Mobility Radeon HD 5470

  HARD DRIVE: 500 GB

  Backlit keyboard

  Slot load CD/DVD player

  P.S.: My CD/DVD drive and HARD drive recently prob SO dell replaced both.

  Thank you

  Manan

  Today engineer came to my house and the replacced he fan + heatsink. Thermal paste is already on it I guess, it has not applied separately.

  Fan runs smoothly.

  Failure: in fact the outer part of the radiator is responsible for this when the engineer came out the part and he hit an outside party who is also visible (Manager) of air is broken.

  It was broken when an engineer trying to clean the fan lol.

  I've also attached the image of the broken part. Image is not good but always visible

  .

  Another view:

  

• X 200 maintenance

  So, I bought a replacement for my 200 X motherboard. I will introduce a new application of thermal paste (using the "chill WIND of THERMALRIGHT'' FACTOR from " ").

  Link to photo

  My question is, is it OK to apply the Paste on the entire inside the purple squares in my image, or all areas simply when it was red inside?

  If its okay to apply it in exposed areas purple together, for this actually benefit me? It will keep more fees?

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Good day and welcome to the community.

  Thermal compound is exclusively intended to be applied to the top of core chip die (the red area shown in your picture) and my experience only on the processor. The other "chips" under the Fan/Heatsink Assembly had regularly thermal pads for the contact. This was the case when I replaced the fan/radiator on my X200T. However, I've heard of some people using compounds there, but I don't know how well it fills the gap. Ideally, you want very thin, very even coverage on top of core chip die.

  Kind regards.

• help with my Lenovo X 1

  Hello

  I want to know if I can add 16 GB of ram I have actually 4 GB.

  my phone is hot someone can help me to open it and change the thermal paste I know how to do but I do not know how to open my laptop.

  Thank you for helping me

  http://support.Lenovo.com/en_US/detail.page?docid=UM006394

  Follow the above manual material, it would show you how to remove the Fan/Heatsink assembly.

• Broken Fan on the heatsink for Pavilion e9110t

  Editing for this heater broke causing the CPU overheating and close. The part # for the fan of 1322-006D0H2 but it seems his is no longer recognized. Someone can suggest a suitable replacement or can any fan heatsink 3inch work on this?

  Thank you

  ellander1,

  HP e9110t is a CTO (configurable) system and supports different 9 Processor Intel.

  Your dialogue that gives to think?  The Mount of the CPU is broken, not the fan bracket. The fan on the heatsink with 4 screws.

  TheOldMan suggested, the complete kit is available.

• I need a heatsink / fan for p7-1254

  My office gets really strong and I need to replace the fan and, possibly, the heatsink, but I do not know what to look for. Can you help me?!

  Here it is on eBay:

  http://www.eBay.com/ITM/HP-P7-desktop-CPU-cooling-fan-heatsink-644724-001-/360760738117?PT=LH_DefaultDomain_0 & Hash = item53ff040145

  REF. 644724-001

  HP is out of stock at the partsurfer

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.