fan not detected

Similar Questions

• 500-210qe Pavilion: Pavilion 500-210qe: cpu fan not detected after update BIOS

  Pavilion 500-210qe started showing ' 511: cpu fan not detected; F1 = boot' message.  I checked the BIOS rev level and set to upgrade to the latest (80.13 FRIEND) but the problem persists.

  At startup, the cpu fan is not running, but after pressing F1.  Please notify.

  From the least expensive option, replace the cpu fan (which comes with the heat sink) has solved the problem.

• HP Pavilion 500-164: the printer error HP Pavilion 500:511 - CPU fan not detected

  I have a HP Pavilion 500-164. Every time I start it, I get a 511 - CPU fan not detected error message.

  At the bottom of the screen, it says F1: Boot

  Then he begins to run smoothly. It becomes annoying.

  Examination of the aircraft, but when I find the two fans running?

  What is the problem and what I take in repairs?

  Hello

  Use a can of compressed air to clean any dust from the fans in the PC.  With the side panel, power on the PC and still observe the rotation speed of the fan.  What do you see? slow, medium, or high speed?

  Open the windows to RUN and enter: MSINFO32

  What level of your PC BIOS runs?

  Install the latest diagnostics for your PC. Start your PC and press ESC then F2 to run a diagnostic.  Run a complete set.

• C.P.U fan not detected at boot

  When I turn on my desktop, it says cpu fan not detected & the bottom 'F1 boot' button appears after pressing on which I can log on, I had windows xp on my computer.

  Please tell me how to fix this error...

  Hello.

  Open your computer case and check the fan I have well connected to the motherboard, and it is infact turns when you turn on the computer.

• Satellite A300D - FN keys and fan not detected

  Hello

  Crashed my HDD (winlogon, MBR, boot,... deleted. Just a disaster), so I have to format the drive and make new instalation of Windows. And it happened Toshiba utility installation. And I can not find the drivers for the FN key. I googled to be called "Utility Flash Cards", but only what I founded is pdf of it. And also my Everest or Notebook hardware control is none of my fans.

  So I ask, where can I find it? Or better... is a place of grand ' ol pack after the new installation of the operating system? Why my fans are not detected by the system? Maybe I just forgot to install a driver. It is quite possible. So, where is a problem?
  And... I'm just curious, y at - there a programe, utillity... etc. which can control the fans?

  I have the Satellite A300D, Windows Vista 32-bit

  Thank you very much!

  Hello

  Can on mate, you can find all the drivers and utilities on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You must install Toshiba Value added Package. That's all that you need for the FN keys. ;)

  But I m wondering about your question about the fan. Why do you think the fan isn't recognized? Everything about the fan will be controlled automatically. You can change only the method of cooling between performance and battery optimized in Windows power management.

• 512-chassis fan not detected

  Hi all

  I h8-1114 office and I put the card mother and hardrive in case Antec 900. I got message from BIOS 'fan of 512-chassis not detected. " From this point, I have to use F1 to start.  I know that this rear fan is no longer connected to the moetherboard. Really, I is not necessary that fan because Antec 900 has a much better fan system. Antec fans are huge and not connected to the motherboard.

  I tried to disable this BIOS message in the BIOS settings, but it seems that there is no option. What should I do to disable this message and start without the use of F1? Thanks a lot if anyone knows.

  ramburak,

  Connect the rear fan on the motherboard or use the left side mount for the original fan option. If you use the rear fan, don't forget to put the fan at maximum speed.

• Error 512 - fan chassis rear not detected

  Hello

  Just unpacked my birthday gift today... a brand new and shiny, HP Pavilion HPE-595uk (yay!).  My husband purchased directly from HP, about 3 weeks ago.  It has been used until today.  (Happy birthday, me!)

  However, on first switching on, I received a message from bios:-"512 - undetected, rear chassis fan error press F1 to continue"

  I pressed F1 and start continued, Windows 7 is installed, everything seems ok... I'm talking about (entered) to you on the PC right now.  However... If I have to powercycle the PC, I get the error (error 512 - rear, chassis fan not detected, press F1) every time.

  That means there is a problem with this PC? The rear chassis fan should be detected?  If a cable is loose?  All new PC remember... just out the box 2 hours.

  Thanks for the inforfmation.  I just started my new computer that has the message 'Error 512 - rear chassis fan not detected'.  Rear fan connector had a bent pin and the connector has been sitting on it.  Pushing the stem with long nose pliers and a small screwdriver it fixed and enabled the connector to connect all the way and everything is fine.  Be sure to remove the power cord from the back before you do.  I did not, and the button was hit during the removal of the side panel.  Since I was a SDS I heard the computer turn on - I was lucky is not to run out of something!

• Fans not correctly detect when you present to the RPM

  Why my 13 "2015 MB Pro fan not totally crank when the cpu temperature is like 100ᴼ? For example my CPU Core 1 is 80ᴼC and my Core 2 CPU is 100ᴼC, my GPU Core even 78ᴼC yet the rest fan 1300 rpm, whereas at this stage at 4000-6000 RPM.

  Is it because I have iStat Menus active? I put rules fan on this OFF application preference so he shouldn't meddle with the fan in addition to giving my sound status.

  I also wonder, Google Chrome would heat my laptop for the h

  Check your MacBook Pro with Apple Hardware Test if thermal sensor is something wrong.

• Computer laptop 15-f039wm: not fan not turn only at starup seconds, laptop is NEW

  I recently got a laptop Hp 15-f039wm. I saw on the updates of the site of support for the many more advanced BIOS, which brings the plant and downloaded and upgraded. Now the microphone fan runs only a few moments to turn on and no more runs to reach room temperature and with success just before the update of the BIOS. It is a bug in the BIOS or head surprising fan was less than 72 hours of total use. Could someone help me?

  Cool meanings applies not for this product

  Speed of the fan (not the HP software) detect the sensor into the motherboard for laptop

  I can't go back in time and stay away from the Bios Update and downgrade impossible (al at least for me)

  Using the maintenance and maintenance guide you gave me, opened my laptop and remove the internal reset cmos battery and short circuit between the poles of the socket. I don't know that it could be, but I can say that the cooling fan is working normally now.

• CD drive is missing or not detected

  Good if I did a lot of research through forums on this problem already, none of the advice has helped me. But there is also another factor involved in my problem so I thought I should talk about my experience. I hope someone can give me some advice.

  First of all, I have a HP Pavilion dv9700. I often play the Sims 3 on my laptop. Which means every day. My laptop has overheating problems, so I bought a stand with a fan in her lap. It helps somewhat but not completely. So sometimes my computer shuts off when it overheats and I think that the reason my CD player does not work is related to it somehow. I played the Sims 3 on my computer and of course, it has overheated and it just stopped on me. When I went to turn on of course I had to restart the Sims. Well, it was not as simple as that. Whenever I tried to load the Sims he would say something in the sense of "Cannot start game when already played" - something like that. Once, he actually does not play for me, but my computer is hot so I turned off and when I tried to play again it woudn't work. Since then, I have tried everything to fix my drive, none of the work methods suggested for me and when I run the fix of Mr. program he can't help either, it just says that my CD drive is missing or not detected. I am so at a loss for what to do. And I know that a lot of people have this problem, but I thought that my situation may be other factors involved. If all the tips that can help me are greatly appreciated!

  Hello

  Clogged or blocked vents? The internal fan is working correctly? Doesn't look like
  everything is as it should be in the Department of ventilation. Clean as much as possible, and even if it's awkward
  Try a good fan blowing through the vents as a test. This should be very telling. If the internal fans
  are not all work as they should, or the ventilation openings are blocked, then a whole or several parts of
  the device can get too hot and either acting strangely or stop completely.

  Check with the HP Support and forums for known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===========================================================

  Help for the problem of CD/DVD but the heat might indeed be the main cause of the issue.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Video card GeForce GTX 660 not detected by the motherboard Windows 7

  I recently upgraded my PC with an Asus z97 - a motherboard and processor Intel i5 4. After the reinstallation of Windows 7, I was able to get a signal from my video card 660 geforce gtx for a few hours. After Windows install several updates, however, I am unable to use my video card without receiving an ENTRY NOT FOUND both of my monitors. My video card is also not appearing in Manager devices, or BIOS and use rather Intel HD Graphics. Cause of the undetected video card, I am unable to install the latest drivers for my card and I have no idea what to try next. I also made sure my current diet provides enough power for the card. Is powered without a doubt the map because the fans spinning, I'm positive that I've attached all required power cables, and the card is inserted completely into the motherboard. I tried all PCI-E ports in my motherboard, but it continues to not display. I tried to install the drivers manually, but the video card should be detected before this is possible. Any help would be greatly appreciated.

  My specs:

  ASUS card mother Z97 - A

  Videocard GeForce GTX 660

  Intel i5 processor 4

  8 GB RAM

  700W ATX power supply

  I should point out that I have tried almost every technical troubleshooting that I have met, with the exception of disabling Intel HD Graphics. I fear that if, due to there not being any trace of my video card in the BIOS and Device Manager, if I disable this will also lose signal from the motherboard of DVI and HDMI, ports that are what I currently use.

  Hello

  As the graphics card is not detected by the motherboard, you will need to contact Asus for more help on this issue. You will need to check if the graphics card is detected in the BIOS or not, if not then contact the computer manufacturer is the right point of support.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Hard drive not detected once, but now?

  Hello

  I am Zak, a bit of techno when it comes to playing with the software, or re-Assembly of computers and whatnot. Unfortunately, I have no idea about other things.

  Some quick history on my laptop: the fan was made terrible noises in recent weeks. Initially, I thought it was little dust, so I got a few duster. A lot of dust came out, so that can only be good, but the noise came back after a few days. After some research, I thought that the other logical explanation was probably the hard drive goes bad. I hesitate to send back to HP because I use it for all my college work and it would really put me back weeks to have it not.

  So, a few days ago I booted my computer laptop at a "drive not detected" - or very similar - message. There were a few options for f1 - f4, they were information system and 3 different tests (I think). I ran the tests, all of them came back fine, noting that there are no operating system installed, or a hard drive to boot from. I rebooted because I didn't quite start and wanted to see if there were other options. It turns out that he has started well. I restarted once more and again once it did it very well.

  Then, I coded around, back up all my data, gather warranty information, installation of the HP Support Assistant, etc. I ran all the tests help Wizard and there is no problems found. Since I just got the laptop hibernation when I stop using it, and I have not met any unusual problems. All this sounds great, but my warranty expires December 7 this year. It is safe for me to assume that the "drive not detected" error was just one missed? I read a lot of discussions and FAQS on him and it's not something that happens once and goes. However, I never had to use a warranty so not sure quite how the process works, and as I said, he sent everywhere would put me in my work.

  In order to be a full post, I have a HP G62 - 367DX laptop, running on Windows 7 64-bit OS, and as far as I know there no change was made between error and my prior boot. If there is any other information I can give you, let me know.

  See you soon, thank you for all help and good day

  The wizard tests are not as comprehensive or reliable as the drive hard test in the BIOS... tap F10 as you power up, go and find the hard drive test. Run the long form test and see what it says. It is not uncommon that the hard drive start as intermittent and get progressively more frequent problems. If your drive passes the test of long form, only enough safely, you can assume that it was a unique gremlin, but it's still a really good idea to back up. I like the idea of online backup services and I will quote Carbonite only because it is well known and not as an endorsement. There are several more and year external drive is a good idea.

  You can't put off forever; restarting You'll have to deal with the issue at some point.

• Dell Vostro 420 - fan not mounted

  Hello

  I take my Vostro 420 with Core2Quad Q9650, but I would like to start making serious games with him, and I'm afraid that the CPU fan and chassis fan never accelerate ramp with the heat.

  I ran Prime95 x 64 with HWMonitor, temperature monitoring.  It is in the high 60s and the CPU fan stayed at 1300 rpm or more and the frame of the fan 800 rpm and has never changed.

  I tried to run Speedfan and it has correctly detected the fan speed, but I can't change it.  Speed already shows 100% which is incorrect, because I know that they are not turning at high speed and pressing on the top and bottom in SpeedFan has no effect.

  Can release you a BIOS update that corrects the inactive PWM fan control?

  Thank you

  Edit: I am aready using the 1.3.0 latest BIOS.

  Hello

  It is a Committee of OEM Foxconn (G45A01), and Dell just used a regular Phoenix BIOS (and has not paid for it.  BIOS string reads "Phoenix Bios of demo" or something like that).  There is no fan of detection failure, but I have the original fans in there.

  The regulator detects in Speedfan and the ROTATION speed is displayed correctly, but I can't change the speed.

  It is most likely a very simple solution.  Foxconn could fix for Dell in a jiffy ;)

  Thank you

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• my ipod is not detected by itunes

  Hello, so, as it is said, my ipod is not detected by itunes and it s not because taking usb does not work or has problems because it becomes a hard drive on my computer.

  I have tried everything but nothing works:

  I have reset my ipod and itunes, uninstalled, re installed, turn and turn on my computer and itunes and my ipod as well, I tried only everyt things written on the internet.  as I completely cleaned my ipod it, but now I'm stuck because I can t get my music back.

  and nothing worked, so I'm really frustrated and really need help please

  Thanks /.

  What is an iPod touch?   IPod touch does not appear as a USB storage directly on your computer.  An iPod nano can appear there.  The current nano iPod looks like this

  

  Also, is your computer running iTunes on a Mac or Windows PC?  If Windows, which free?