Similar Questions

• UCS-C210 m2 fan speed issues

  one of my servers has fans will quickly 6 to 8 k.

  

  My second server of similar configuration is at a normal speed around 2 K.

  I had this happen in the past and I think that I've updated the firmware which seemed to fix. but it seems to have reappeared.

  I restarted the server, and the fans are always go fast.

  both servers are running the BIOS

  C200.1.4.1.0 (Build Date: 13/07/2011)

  CIMC

  

  ======

  Update:

  Earlier, I tested just as to completely stop the server and restart that seems to have helped.

  except now only PSU fans go around 5 K

  the system fans seem to have stabilized to the normal range of 2 to 3K.

  

  my other UCS Server PSU fans are running at 2-2. 5 k.

  Temperature is not a problem, they are both running around same time.

  .. and are both under minimum load

  any ideas as to why the power supply fans are vivid?

  Hi Robert,.

  I guess I must also point out that your two servers have two different versions of them supply systems which explains the differences of stabilized power supply fan accelerates even after having worked around the bug, in my opinion, one of the servers may have met.  UCS-c200 has older PSUS that have two fans online so that fans can run a low speed to maintain the required temperature.  UCS-c210 m2 has newer power supplies that have only a single fan in them so they run the fans at higher speeds to maintain the required temperature.

  Mike

• DL180 G6 Server Rack - permanently at 80% fan speed

  I bought a "SE326M1 G6 Twin Xeon Hex Core L5640 48 GB RAM HP Proliant DL180 G6 Server Rack 2U" on eBay. As he came not with all drives, I bought four caddies and some third party SATA hard disks. The computer works as such, but fans run constantly on the 80% fan speed and thus sounds like a rocket.

  The logging of the ILO 2 displays the following warning:

  "Error MESSAGE: 1717-Slot X Drive Array - the following discs declare a State of overheating:

  The temperature of the ILO 2 storage area (five separate readings) reading displays 'OK' and 0 degrees centigrade for five. So, I assume that the 'sea of sensors' place the fan speed 80% because there is no available temperature.

  My current conclusion, which is no more;

  1. the hard drives is not a temperature sensor and I need to use four hard drives certified HP

  2. the sensors on the Drive Cage Assembly (HP-530946-001) are defective

  3. berries for empty drives must be filled with blanks

  In order to exclude all these possible I have to spend very little money and time, and so I have the following questions.

  Issues related to the:

  1. do the disk drives HARD to have a temperature probe at all? Will they have, is the temperature read by the sea of sensors?

  2 iLO 2 would display a temperature for the "storage area" even if there is no disk HARD drive in one of the 25 bays at all? If this is the case, it would tell me that the Drive Cage Assembly sensors are defective.

  3. fill the HARD drive bays with white makes temperature sensors start working? What I wonder if whites have an electronic or similar, or that they are just empty pieces of plastic?

  Hello:

  You can also ask your question on the HP Business Support Forum - DL servers section.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.U1e4FulOW9I

• Fan speed running higher than normal even if my P.C. Khvan is minimal

  The fan speed will not stop running

  Hello

  Make sure that the system has adequate ventilation. If a PC off all power and remove and reinstall the cards.
  memory and cables (both ends) - tighten not - in fact, remove and replace. Clean the inside of the PC
  to remove dust and lint. A laptop to clean the vents is all you can do without technical support.

  Check with the manufacturer Support system and forums (if any) that there are known problems.

  ========================================================

  You have said not much was however to be sure, you can try these methods.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• E535 fan speed fluctuates constantly

  I have what I think, this is a common problem with edges: My E535, I got a little more than a week, starts quietly. Then after about 3 minutes the fan will increase to high speed, even under light load (e.g. only Firefox running and limited scrolling or other activity). After a few minutes at high speed stabilized, it starts cycling up and down, upward and down, up and down... This is being moderately annoying. It does this if the unit is plugged in or on battery power. It also happens when I'm doing other things... OpenOffice spreadsheets or word documents or even just letting the system sit idle.

  I tried to change the settings with Power Manager, but for some reason, PM ends up crashing when I try to select a lower fan speed setting and a setting of normal brightness (level 10). The two issues could be related? I assume that similar positions for E530 and other seams it comes associated BIOS. Here's my info:

  MS Windows 7 Home Edition Premium, Version 6.1.7601 SP 1, Build 7601

  Edge E535 model 3260CTO

  AMD A4-4300 M, Radeon HD

  BIOS LENOVO HHET75WW (2.08), 24/10/12

  SM BIOS 2.7

  Thanks in advance for any help. I love the machine, except for this inconvenience!

  No, I simply ran the update http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029728 utility

  But now the problem is that the CPU fan is too passive. The laptop is very silent but overheating and choking the CPU if you do not limit the frequency of maximum processor which is annoying, but at least less annoying than the fluctuating fan.

  Edit: I should say that it strangles 900 Mhz CPU for demanding applications, when the temperature reaches about 75 ° C until the temperature drops to 50 ° C. Being able to control the fan speed could solve this problem, but apparently you can not on the E535.

• Satellite C660D - software to control the fan speed?

  Just brought a C660D. Someone knows the software to control the fan speed?

  My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.

  If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.

  Hi Polaralbatross,

  Have you ever tried the Eco mode that uses the cooling battery optimized method?

• Start of satellite L10 fan speed and noise

  My L10 cooling fan start always maximum speed, when it turns on it always burst at maximum speed (and noise) and then slow down to a speed (and slient relative). This fan start noise is very annoying (as fan departure every half hour in office work and every 15 minutes in some simple games).
  I try muffler or bios settings performance they do not fix the noise and the starting speed.
  Maybe Toshiba could release some bios update or patch or something to fix this? (my bios version 2.0)
  Maybe this problem has the solution software thrid party?
  Or the fan speed max is just a hardware problem?

  Thank you.

  Hello Albert

  The same thing my Qosmio F20 and in my opinion, it is not any kind of technical problem. At the moment I'm typing this text and hear Internet radio at the same time. The cooling fan works regularly.

  In my opinion, when the operating system runs several different processes running in the background and they need the CPU activity that needs to be cooled correctly. In my opinion, you should check the power settings management settings and change the performance of the processor to lower the level.

  If the cooling fan runs every 15 minutes, in my opinion, it is not too often.

  Good bye

• Satellite U500 - temperature/fan speed of degradation after overheating

  The hard drive of my laptop suddenly developed a load of bad blocks without reason apparent, so I replaced it. I started a live linux CD to copy the old drive to the new and left running overnight. When I came back to him, he ran VERY hot. It's not well crushed.
  * Since then, the fan worked up a gear more often than before *, in the original Windows installation.
  Use a temperature monitoring program, I can see a temperature which is constantly higher than both the CPU and GPU, and I think this must be the problem. I can only think that it is setting the fan speed based on this incorrect measure. I don't know where this temperature is measured, and unfortunately I do not know what it was before the problem started. The new HDD is cool, so it is impossible that the change that caused the problem.
  Someone knows something I could try to fix this?

  Hi Blah_1,

  You probably have a higher internal temperature because your new HARD 7200 RPM drive instead of 5400 RPM. For hard drives at 7200 RPM are originally more heat during the backup process racing portable to use high CPU if it s normal behavior that he s hotter than normal.

  In any case, the laptop must be also cleaned from time to time using a jet of compressed air as described here:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=105]

• Oscillations of 0.5 sec Equium A60 fan speed

  My old Equium 15 months began "pulse" is 30% of the time its on it's normal speed to high speed and back again on a second half interval or more.

  Any suggestions please?
  Thank you
  Geoff

  Hi Geoffrey,.

  If your fan speeds up often means that your laptop is overheating. Try cleaning your CPU heatsink with a vacuum cleaner. You will find this described several times in this forum.

  Kind regards

• How can Qosmio G30-126 - I check the fan speed?

  MODEL: G30 - 126
  OS: VISTA 32-BIT SP2

  How to know the speed of the fan? I have try several programs like "sensor hw monitor" & "fan speed" but it's not watch everything think about the temperature of the CPU just fan speed.

  Where is the problem and what I need to do?

  Hmm... Why you want to know the speed of the fan?

  The fan speed will be automatically controlled and you can t change this or manually control. You can change the method of cooling between performance and battery optimized in Vista power management. Did you check that?

  In addition, you can clean the laptop using a jet of compressed air as Akuma written. This could blow out the dust from the cooling fans.

• Qosmio F50-126 - fan speed never htting maximum

  Hey

  This question been bothering me for a long time but was too lazy to write about it. When I start my laptop, you can hear the fan speed reaching its maximum RPM. But during the game when the laptop is about to reach its maximum temperature for restart, the speed of the fan never hits its maximum RPM. It always seems to be about 50 percent when it will hit the threshold of overheating.

  Can you tell me how to solve this problem, so the laptop is we fan maximum RPM during the games or another cpu/gpu intensive process?

  I have the latest BIOS and drivers installed to date.

  Plan to use everything at stake?
  Check the method of cooling for this power plan and set it to maximum performance.

• Is satellite A500-1DN - possible to adjust the fan speed?

  Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and quite large making noise.
  I wish to address is it permanently on.

  Is this possible?

  Hello

  > Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and make a big enough noise

  I agree with you, I also own a500-1dn and it makes big noise even while surfing Internet. This forum was suggested to update Bios to reduce the fan noise.

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!

• Portege M400 is frozen, screen goes black and the fan speed increases when moved

  Can someone help me please?

  I recently received the Portege M400 from a friend 4 days ago and reformatted for Windows XP Tablet Edition.
  Everything's fine until I wanted to move the laptop to my coffee table, but as soon as I move the laptop it freezes, the screen goes black and the fan speed increases dramatically.
  So far I have had no success in the resolution of this problem and I really appreciated, is that someone could help me!

  Have you installed the OS using a Toshiba recovery media or you have installed the version of the OS?

• Satellite A500-1GL: 2 questions: the fan speed & graphic card driver failures

  Hello

  I have 2 questions, hopefully someone can help me with that.

  * The first question - quick fan *.

  I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.

  I'm looking for some advise here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

  Can anyone help, should I be worried?

  * Second question - graphics driver *.

  Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

  I really hope that someone can offer more help that Toshiba has done, as I am a bit unhappy to be problems on a 2 month old laptop.

  Thank you for reading and I look forward to any Advisor.

  (> I'm on online gamer second life and world of the craft of war) recently my fan speed crank up to 90 percent for about 5/10 minutes before leaving quiet. Then speed up again after a period of time. I'm confused as to why he did this because when I check my cpu temp is only make 40%, and I use a cool buffer table.
  > I'm looking for some advice here because all said Toshiba was making sure I had the latest bios update. But I would have thought it is not the processor overheating the fan must not be crank that quickly. My laptop is only 2 months old.

  The cooling fan is controlled by the fan table in the BIOS. Fan table contains information about the temperature and the fan speed that means the depands on some level temperature fan speed.
  Over all the possible game features as the CPU, GPU, produce heat and the heat dissipation is high
  Cooling modules would begin to turn faster if the temperature level would be exceeded
  This is nothing exceptional everything at stake

  > Also on a couple of times I got my screen briefly go black and then recover. A pop up appears saying something along the lines of the core of the graphics card.... Driver recovered. It flashes if fast, that I never see the entire message. Don't you think that something is wrong with the graphics card? (card nividia geforce gt300m)

  I read on a similar question, and apparently, the graphics card DRIVER crashed during games
  Maybe it's a compatibility problem between game and pilot
  In most cases the graphics card driver update should fix this and I read on some forums that it has helped in many cases