FastAccess facial recognition software uninstall

Similar Questions

• DV6 there password to facial recognition software and toolbar HP advisor?

  I have a HPdv6 3250us notebook computer with Windows 7 and I just read http://h20331.www2.hp.com/hpsub/downloads/Face_Recognition-_Tech_Spotlight.pdf on software for facial recognition, which can be used to connect to Web sites instead of a password. While my HP came with simplepass identity protection figerprint hardware and software scanning, I would play with this option of facial recognition... BUT I can't find it on my machine. Maybe is not installed on my laptop because of this because the reader of fingerprints, IDK.

  Is it here somewhere? The PDF said find in the "HP Advisor Toolbar', but I apparently don't have to be!

  I should have this toolbar in my taskbar as it says that all new HP laptops are equipped? Or is this sentence wrong?
  Bottom line;

  My HP dv6 3250us there password facial recognition software?
  AND
  My model also has this HP advisor Toolbar somewhere, and I'm not?

  Please indicate where it is, or why I don't have the latter, thank you.

  Perry Florida

  Your HP dv6-3250us doesn't have / are delivered with a facial recognition software installed.

  The same PDF that shows in your answer clearly indicates that this feature is only available for professional laptops HP and not on any portable consumer like yours.

• Satellite C660 - cannot start the facial recognition software

  When I try to run face recognition software I get a window saying to contact my administrator - I have the status of administration on the Satellite C660 laptop.

  Research forum that I found did not help in any time I try and follow the advice, I still get the same message. The laptop is new.

  Hello

  I think that this tool is confusing upward in some way. Therefore, the first thing that should be judged is a new software installation. I recommend you to uninstall this tool first.
  You can do it is Panel-> software

  After the uninstall, it would be recommended to clean the registry. This can be done by using a software like CCleaner.
  After that, download Toshiba face recognition software pilot European page and install again.

  Good luck

• FastAccess facial recognition

  Hello world

  1st time post, please excuse the transgressions of forum etiquette.

  I just bought an inspiron 7720 and want to install fastaccess. The only problem is that I can't find anywhere to download it.

  Can someone point me in the right direction please?

  John_Jackson,

  Here is quick to access FAQS and here is where you buy, of Sensible Vision

  Rick

• Facial recognition error

  I have upgraded to iOS 10 the other day and it is very good even on my iPhone 6plus. However in the photos app, the facial recognition software is great, but it is not perfect. He can see me and group all my photos into an album (JanuaryShark) and that's fine. But if "AprilFish" appears in my album like me then how can I rename this photo and put it in his own album (AprilFish)?

  But if "AprilFish" appears in my album like me then how can I rename this photo and put it in his own album (AprilFish)?

  Select AprilFish from your album of person and not use 'this person '.

  See: http://help.apple.com/iphone/10/#/iph9c7ee918c

  Remove misidentified one. Press a person in the photo album, and then view all to display all the photos they appear in. Press Select, tap Show Faces, tap the misidentified face, press the Share button, then tap not this person.

• Face recognition software is not working properly

  Hello & help

  Just bought my wife the Tosh Satellite C660D. She wants to use facial recognition software, but the stupid camera will not recognize her beautiful face, it will also not recognize my ugly face.
  Any ideas or comments would be appreciated.

  The typical problem of s for this software.

  I tested several times and realized that in most cases it works well, but often, when the background light is not very good, or you're not in the right position, it will not recognize the owner of the laptop.
  What you can do is to test and test again.

  In any case, my advice to you is to use a standard connection with password.

• Facial recognition on Qosmio x 300 may not register well as audit success

  Hello

  Just got my computer laptop-Qosmx300-13W. Had problems with the fingerprint reader in that it would not even go. Uninstalled and installed the latest version of Toshiba download page... s everything works now.

  The problem now is with facial recognition. I can access the registry page, register successfully and the face is successfully verified. a new form appears. It has my username (but not name, said only: '-') and my computer name. Initially, there are two additional fields, "Password" and "Confirm password". The confirmation password field appears for a split second, then disappears. So, you can enter a password, but not a password for confirmation.

  The OK button has a blue box around it. Using the software as it was of the recovery partition, when I click on 'ok' it gives me an error indicating that the confirmation password is not correct. I tried the update of the drivers\software from the download from Toshiba site today but I still see the same behavior that only now is worse in the sense that when I click on 'ok' as opposed to a message telling me the password is incorrect, I get on a string error access violation. More information can be provided if required please do not hesitate to ask.

  Any help would be much appreciated.

  Experience of Toshiba's not going too well I'm afraid: two s has neither worked on the box... then again it is common with most businesses so hope still it can be solved.

  Thanks in advance (ps. I prefer to be contacted by email, [email protected] if it appeal to you can moderators let this address here, I understand that leaving the addresses may lead to get spam in my Inbox, that's a risk I'm willing to take. (Thank you).

  Here's an update for someone else who could have this problem.

  Seems the facial recognition is in conflict with the extra finger print scanner another question... it seems that facial recognition does not work when my user account is a single administrator account...

  After posting my initial post, I went and created a test account. I then tried the registration process for the admin account and all crossed only instead of passwords requested that my fingerprints (I have the fingerprint reader enabled). Once who has been entered, everything is ok. However at the time wherever I deleted the test registration face recognition account began to play up again. That said the account that has already been registered works very well.

  My advice to anyone else in this situation is to create a test windows account. Try to record again. If successful removal of the test account and you're done.

• Spectrum 13-4000 x 360 Convertib: why spectrum x 360 does not support the connection of facial recognition?

  This link lists the computers that support the connection of facial recognition Hello in Windows 10: http://www.windowscentral.com/here-are-all-pcs-support-windows-hello-facial-recognition-windows-10

  The spectrum of x 360 is not among them.  Is it because the camera in this laptop isn't a RealSense camera, or is it because the socket driver is missing for this machine?

  Any chance of accompanied by an upgrade of the driver of HP?

  Thank you

  Hi there @jwg,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the connection of facial recognition on your laptop with Windows 10.

  I suggest you roll back to Windows 8.1 if you can for the moment because not all of the driver are available yet for Windows 10.

  I'm not aware of updates at the moment of the connection of facial recognition. However, the updated Windows 10 drivers will become available on your HP drivers and Downloads Page specific products as they are released and become available for HP.

  If you are unable to back up, here's a link to the HP Support Assistant if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  You could also try Windows updates. They are coming with new resolutions for these issues every day.

  Have a great day!

• How to install on windows face recognition software 8

  I downloaded the facial recognition for HP protect tools on the site of hp, but while that install shows a command prompt he needs HP protect Tools Security Manager, so I downloaded as well (HP protect Tools Security Manager v.8.0.1.1328) but while install showed an error that "this software is not taken in load on your system" while on the Web site , he says that he supports both versions (32 - bit and 64 - bit) of windows 8.

  How to install laptop on my HP pavilion G6 face recognition software.

  Hi, Germain,.

  I thank very you much for coming back to us, with the updates.

  (1) don't you try to install the HP ProtectTools Security Manager software in all compatibility modes listed there?

  (2) you receive the same error message when you try to install in compatibility mode?

  If the Windows 7 compatibility mode doesn't work, then you can also try to use the Windows Vista/XP modes and check if that helps.

  If this does not help, then the problem could be due to the incompatibility of hardware. In this case, it would be best to contact the HP support to check if there are other similar software compatible with your hardware and Windows 8. You can get in touch with them from this link:

   http://WWW8.HP.com/us/en/contact-HP/contact.html

  Hope it will be useful.

• Export data of facial recognition in html format

  I have hundreds of photographs dating from the mid-1800s, where I recognized faces. I would like to be able to export photos with facial recognition data to produce a web page.

  Is this possible in Lightroom 6 or 14 items?

  If I switch to Lightroom 6 can I import data from the elements with the facial recognition data attached?

  I currently use 5.7 Lightroom & 14 items on an iMac 27 with OS X El Capitan

  I would like to than LR to produce one page per photo with the ability to click on an icon to activate the boxes to facial recognition to reveal the names. This would be ideal. This is a project we hope to identify hundreds of people on photos for a society in history.

  I know not all plugins or software that would do the job for you.  Maybe someone else to do it.

  I had also thought of how or if it is possible to produce a spreadsheet of names and the names of files that are not in.

  The plugin LR/carrier can export a spreadsheet containing the names and keywords attached to them.  (LR stores the names attached to faces as regular keywords.)

  If you want to access the rectangle real around each face as the name attached to the rectangle, you must export the photos of LR and then use external as the Exiftool free to extract the data.   On Exiftool learning curve is quite steep, at least you are technical interested with the latest scripts or experience in programming, so expect to take many hours to get on the same page.

• Facial recognition tags not appearing is not in the people page after his conversion to the PSE11 and people

  Hi Forum

  Upgrade from 10 PES to PES 11

  Attention, having spent more than 3 hours, using the characteristic face in 11 elements of marking (because it uses tags to people from earlier versions to complete the new people tab). I can only say that the result was less useless. I have now more than 1200 images marked with the wrong people and several bad people. And worse still the person who should have been marked is not there at all!

  I noticed that during the process of marking the image displayed to provide that a name is not the image in the selection of the view full screen - it actually displays a different image. So my guess is that this isn't really the face of marking you see but apply the tag to the image he thinks that that is.

  The result is total garbage... What a waste of time and effort. Not happy at all. What will be the software Adobe Version work, hard lesson learned here.

  Concerning

  David

  Title of the message was edited by: Brett N

  Just to clarify, when you convert a catalog from a previous version of the organizer of the elements to version 11, the people page is filled with tags keyword under the category (and its subcategories, which become groups). If you have organized your keywords so that you have people (even those created using facial recognition) tags in a different category than people, they will not show upward on the people page.

• Rename people in the new facial recognition

  I quickly learned how to add a person's name in the new facial recognition feature in iOS, but I made a typo in a person's name and saved. How can I go back and change the name of the people? When I press on their behalf, nothing seems to happen.

  Tap Albums > people then the person of your choice.

  Tap the name right at the top, then change the name.

• Disable facial recognition in iOS 10 photos?

  I HATE what has been done to the Photos app in iOS 10.  I have an old personal system of ten year of creating folders and sort my photos in them and do not want some geek put his system in front of me. Just, you can't automate my own choice of folder.

  Is it possible to disable facial recognition? and places? Is it possible to delete all these stupid folders in albums? I am looking to clean up the app and remove: people, places, selfies, panoramas, slo - mo from my iPhone.

  If this is not possible, my second choice would be to move at least until the end of the scrolling line - after all of my own creation records.

  Thank you

  Tom

  It's amazing, but they did not give us a way to opt-out of the image analysis and the only way to avoid it is to move your photos out of the IOS device.  I have auto-download of mine to Microsoft cloud, which then auto-telechargements them to my computer.  I remove out of IOS as soon as possible.  I don't know that apple hoped I wake up each morning, a bit of happy memory, but I open my phone every morning and all delete

• Facial recognition Zoom

  In the implementation of facial recognition login, you are able to Zoom image and take pictures of the sample.

  This allows the site further from the screen in a normal working position. However, when you try to connect at startup, the system returns to the no zoom, and if the images are not & you have place your face very close to the screen to allow a successful connection.

  Is there anyway that zoom settings can be configured to allow a default zoom setting at startup?

  You write about Toshiba face recognition tool or what? I checked the settings here but I can't find anywhere the zoom option.

• Qosmio G55-q802 - facial recognition problem

  Since I got my laptop facial recognition program will not work. He comes up with an error and says device camera initialization failed. The camera is used by another application or it is not recognized by the system. Camera Toshiba utility works. I've even tried to install the latest drivers on the web. I saw a post on a yahoo site that said disable cec_main in the Task Manager, but this program does not work yet.

  I tried to call tech support, which was totally unnecessary. They have me call back and ask for level II. Does anyone else know this same feeling of frustration? Other than this issue, this laptop is impeccable!

  G55-q802 with Vista 64-bit installed

  I can´t answer this question but just wanted to say that this is a beast of the laptop. Bravo