Fatal accident of the application.

Similar Questions

• BlackBerry Smartphones Blackberry Curve 8330 - fatal error during the Application Loader

  Using the Desktop Manager V5.0

  When I connect my BB 8330 to my PC (USB connection) the Application window updates appears showing me all the new update, I click on the task updated current opens, then the Update Summary window, showing all updates to do, they are all 4.5.0 updates, click Next. Task progress window open once again, 11 task first 3 are fine on my BB, just complete backup 4th task is "Connecting to device ROM", at this point, it appears that even if my BB is turned off or rebooted, the task bar says "Connecting to the boot ROM", my BB business if it's rebooting , spinning hourglass, then I get the notorious "a fatal error has occurred." by updating the software on your device, please try again on the Desktop Manager

  At this point my BB is finally coming back to the main screen as if it were able to tap new. My Desktop Manager does not see that my BB is more connected and I need to stop and restart my PC to connect my BB for the Manager of office again.

  I hope this was enough detail, does anyone have an idea how to get by this error? What he does when he tries to connect to the rom of the device? Why it looks like it turned off my BB?

  Any help would be greatly appreciated

  Hello!

  Here's a knockout who deals with this error:

  • KB02696 "Could not complete the load operation. Fatal error occurred during the update of pocket"error displayed when you try to reload the software on a BlackBerry smartphone

  I hope that it contains something useful!

  Good luck and let us know!

• a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as files cpbackup

  Hello

  We have Adobe Captivate installed 8.0.0.145 Windows 7 x 64 v.

  Activate Adobe crashes with the following error: a fatal error has occurred and the execution of the application took end. Adobe Captivate one attempts to save all of your work in the respective folders of the project as cpbackup files.

  I uninstalled Adobe Acptivate, rebooted the PC and reinstalled activate Adobe - unresolved error.

  I have cleared the cache under settings, clear the cache - unresolved error.

  Please notify.

  Kind regards

  George

  
  

  The update should be available to help, updated. It is available since October 2014.

  Being administrator is not the same thing as Captivate running as an administrator that must be put in place in the menu right click on the shortcut that launches Captivate. You have restricted functionality if this is not done.

  I told you how to clear preferences, with the file Utils. First close Captivate, when you restart CP will create a new preferences folder.

  

  If you have a lot of customization that you will lose when the erasing of the preferences. To keep them, have a look at my blog:

  Captivate 8.0.1 Install? Keep your customization! -Captivate Blog

  Layouts folder is located in the public Documents. It is a copy of the original folder in the gallery. Same thing with the Interactions.

  

• Cf11 crashes (application pool suffered a fatal miscommunication with the to Windows Process Activation Service)

  I have a cluster of 2 servers web IIS on Windows Server 2008 R2. They were executed on CF10 for over a year (if there are not two) without any problem. I've upgraded a server to CF11 and now this server crashes then CF10 servers still works fine.

  I see 4 instances of this error in the Windows event log:

  «A process serving application pool ' *' suffered fatal miscommunication with the to Windows Process Activation Service.» The process id was '4652'. The data field contains the error number. »

  Then finally:

  "Application pool ' *' is automatically disabled due to a series of failures in the process serving the application pool."

  Looking at the application pool in IIS administration, he is arrested. Reboot will solve, but it will eventually crash.

  What could be the problem?

  -Phil

  I didn't turn off logging, but in fact, he stopped recording since about 8:30 am PST, which is strange.

  I don't have the exact errors mentioned in the original post (again) but I am faced with the question that some applications take very long. I Failed Request Tracing active and show applications for simple static files such as .css taking 10 + seconds.

  -Phil

• Don't turn off the misdeeds of the option of backup (storage iCloud) the application or at the end upward in a data loss?

  I'm having a total allocated 5Gig my storage space, in my iPhone5s (16 GB, last update 9.3.2). I have backups for like almost most of my applications. So I tried entering space by turning off backups, for some of the apps. Now who will be harmful?

  In other words, for example say I have backup for WhatsApp and then turning off, I'm freeing storage space. So once I have turn off backup, what actually happens? It does not store messages or conversations in the cloud?

  Adding to the question above, what is the difference of the backup power off and removing documents and data out of the app?

  Any help would be appreciated.

  To your first question: no backups in iCloud means that if you don't back up your device with iTunes on your laptop, an accident or problems, you will not be able to recover your data and your data will be lost. But turn it off doesn't cause any loss of data, that you are prompted if you want to keep what you have in your device or not (always answer ' keep on my iPhone ")

  Secondly, the removal of the information from the application deletes your progression of game, or Safari bookmarks, or attached or any other app login information. It deletes the data on your device.

  iCloud: overview of backup and storage iCloud

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• CanvasClear causes the application crash

  I use a simple rectangular control canvas with movement indicator (Vshape) that displays the currently measured value.

  The value is updated 10 to 14 times per second, and deliberately, I made these values fluctuate.

  The canvas is filled with gradient colors (5 ranges) and the indicator moves upwards or downwards. In order to redraw the indicator,

  I use CanvasClear with the VAL_ENTIRE_OBJECT attribute and then redraws its content.  A few days ago, I noticed,

  that the software crashed, when the Panel containing the canvas control, was behind another window (belonging to an another SW

  tell the programmers Notepad or msword). I was able to reproduce the crash, which occurred immediately, but

  After that the software worked anywhere from 0.5 to 5 hours and the questionable control was behind another window.

  I also have seen, before the accident, if I move the window covering away from the canvas control, rectangle covered

  becomes black (break in non-se mode, it remains white) and it takes several seconds to redraw the partial region.

  Sometimes I noticed irregular elements (a diagonal line, not planned, from the left corner down to the right).

  Labwindows2010 IDE always shows crash-point as a call to CanvasClear().

  None of the functions, manipulating the canvas control, the return of negative values, because the software checks to see if it and if found newspapers a

  appropriate message. The canvas control has to draw political as mark for update.

  Does anyone has an idea how to everyone such instability or how to solve this problem?

  I was also able to capture the call stack and dismantling:

  Unhandled exception at 0x6850226E (cvirte.dll) in sw_dbg.exe: 0xC0000005: breach of access writing location 0 x 00000000.
  6850226E

  68502258 or eax, 0C00h
  6850225D mov dword ptr [esp + 50 h], eax
  fldcw 68502261 word ptr [esp + h 50]
  fistp 68502265 dword ptr [esp + h 50]
  movzx 68502269 eax, byte ptr [esp + h 50]
  6850226E mov byte ptr [esi], al / / the esi content is 0
  movzx ecx 68502270, byte ptr [edi]
  fldcw 68502273 word ptr [esp + h 54]
  68502277 imul ecx, ebx
  6850227A mov dword ptr [esp + 50 h], ecx
  6850227E fild dword ptr [esp + h 50]
  68502282 fdiv qword ptr ds: [68802D40h]
  68502288 fadd qword ptr ds: [68802D38h]
  6850228E ptsps qword ptr [esp]
  68502291 call 687D 5950

  Call stack:

  cvirte.dll! (6850226e)
  [Frames below are may be incorrect and/or missing, no symbols loaded for cvirte.dll]
  cvirte.dll! 684d149c)
  cvirte.dll! 687b036c)
  cvirte.dll! 687b09c2)
  cvirte.dll! 684d9759)
  cvirte.dll! 684d9981)
  cvirte.dll! 687b 5850)
  cvirte.dll! 687bc167)
  cvirte.dll! 687bd40f)
  User32.dll! 7674c4e7)
  User32.dll! 7674c5e7)
  User32.dll! 7674c590)
  User32.dll! 76744f0e)
  User32.dll! 76744f7d)
  ntdll.dll! 779c6fce)
  User32.dll! 76744ec3)
  User32.dll! 76741be4)
  User32.dll! 7673ffcd)
  cvirte.dll! 687c13c1)
  cvirte.dll! (68483419)
  cvirte.dll! (68722687)
  cvirte.dll! (68729882)
  cvirte.dll! 68525b8b)
  cvirte.dll! 686042a 6)
  cvirte.dll! 6846d7dd)
  cvirte.dll! 68557bcc)
  sw_dbg.exe! (00402470)

  Sorry for the delay in response. I followed a red herring for a few hours when troubleshooting this. It turns out that this could have been resolved much more quickly using the resource followed in CVI. If you have the full development system, you can change the compiler Options > debug to cabins lying level and then open the window > Resource Tracking. This will show you all the memory and handles your code currently open. It will appear when the elements are created, changed, or destroyed. Looking at it when your application is running (you need to suspend execution at a breakpoint to see the tracking of resources), you will see that the program continues to create plots that belong to the curve of the COLORSCALE. It is your intensity graph. If you look at using the function for PlotIntensity, he recalled in a note that a new trace is created every time that you call this function, and you want to get rid of these plots with DeleteGraphPlot.

  You can add something like this in InitScaleData.

  if(plotHandle != 0)
  {
          DeleteGraphPlot (IndicatorPanel(0), IND_COMP_COLORSCALE, plotHandle, VAL_DELAYED_DRAW);
  }
  plotHandle = PlotIntensity (IndicatorPanel(0), IND_COMP_COLORSCALE, scaleArray, 2, OGL_SCHEME, VAL_DOUBLE, gColorMap,gColorMap[OGL_SCHEME-1].color, OGL_SCHEME, 1, 1);
  

  I don't think you run necessarily in a memory problem here throwing the parcels. Intensity plots use rather a small number of GDI handles. In Windows Vista and 7, the number of GDI handles is limited to 10,000 by a Windows registry key. I look at the number of open GDI handles in the process Explorer reveals that 10000 handles were open when the application crashed on my system after about 45 minutes of execution.

  Let me know if it works if you have a chance to try this solution.

• The application requires that assembly Windowsbase Version 3.0.0.0 is installed in the Global Assembly Cache, first.

  I tried to download McAfee Total Protection and I got an error.  XPSEPSC install: 1603 error code.  He said as impossible to install or run the application.  The application requires that assembly Windowsbase Version 3.0.0.0 is installed in the Global Assembly Cache (GAC) first.  What should I do?

  Hello

  I suggest you consult the following McAfee article and try the steps.

  ERROR: error 1603: a fatal error during installation

  https://KC.McAfee.com/corporate/index?page=content&ID=KB65585

  WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If the problem persists, try to install .NET Framework 3.0 in the following article and check.

  Microsoft .NET Framework 3.0 redistributable package

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=31

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• UNIX ext scripts big brother asked to analyze the application logs

  Is there a script to check the application logs to find errors in the application of big brother. ???? Can someone help me on this? And how do I turn the same? on the client computers

  On Solaris, I use the bb-msgstab to do in addition to the follow-up of the ADM file. Example of line below;

  # FORMAT - hostname: logfiles: various parameters: yellow strings: Red strings: strings to ignore on

  Server1: / path/to/errorLog: WARNING: FATAL: IgnoreText

• The file of the bar - descriptor.xml (and make the application of command line)

  I made a game with air and it is online for sale on Android and iOS. It is somewhat popular and I thought to put up on Blackberry for quite awhile now and with the Port of soon-to-start-A-Thon, this seems to be a great time to finally make it.

  BlackBerry is not very common that here where I live in Sweden, however it still looks like an interesting with a potential platform if I want to get the trip. Unfortunately I don't own a camera myself so I'll use the Simulator. With some graphic problems with the simulator when running in mode BB10DevAlpha (icons does not appear right) and the Simulator is very slow when running in mode BB10DevAlphaSafe (chart appears on the right, but it seems that updating them requires more CPU my computer are available).

  The game is built using nothing other than Adobe Flash Professional CS6 and a bunch of command line tools to build the package and sign. I've only got an old computer with Windows XP now since the death of my main PC, all at the time and since the Port-A-Thon is just a few days I do with what I got.

  Firstly I understand that only AIR 3.1 is supported by Blackberry 10, so I use the old AIR SDK 3.1 to create a SWF (flash) file.

  What I really need to do should be used in the exported SWF file of the game, then use the command line tools provided by RIM to build the package, right?

  Except that I did not count on bar - descriptor.xml to be so difficult to understand.

  I was brought to the documentation here: https://developer.blackberry.com/air/documentation/bb10/bar-descriptor_config_file.html

  It says Adobe AIR at the top, the platform selected is Blackberry 10 and the title says "bar-descriptor configuration file", so it must be in the right place!

  I start by trying the 'bar-descriptor configuration example file"on this page:

  ===========================================================

  
  
    
        None
        fake
    
   
    
     Name of the author
   
    
     gXXXxXXx ##XxXxXxxxXxXX #xxx
   
    
     Core.Games
   
    
     Icon.PNG
   
    
     HelloWorld - splash.png
   
    
     read_geolocation
     use_camera
   
    
     1
  

  ===========================================================

  Of course during the test I replaced a few things in the example above with the correct filenames for images etc, I just copied the example of right - off this time to you guys show what I mean.

  Firstly, I extract "blackberry-tablets-sdk - 3.0.0" in a folder on the disc, then I make sure as a full path to the "bin" in the SDK folder inside the path on the OS environment variable.

  Then I read on "Applications of Test using the command line": https://developer.blackberry.com/air/documentation/bb10/testing_your_application_cmd_ms_2010851_11.h...

  Now I run:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf myappnameicon86.png bg splashscreen1024.png - device 192.168.8.128

  Note that "bg" is a folder with 500 images that must be accessible from the app. I hope that I can just add the folder like this and not type a path to each image file...

  What I get (in lib\adt.jar via the bat file):

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Okay, so the example did not straight on the box.

  Now, I've read all paragraphs in the first URL I linked above ("the bar-descriptor configuration file"). I start my own XML file and make sure to include everything that is marked as "necessary". That's what I'm left with:

  ===========================================================

  
  
      MyCompany
      
          
          com.mydomain.myappname
          My App name
          3.0.0
          
              splashscreen1024.PNG
          
          1.5.0
      
      run_native
      
          application
          
              bb.action.VIEW
              application/octet-stream
          
      
  

  ===========================================================

  I have no idea of what concerns the block whole call target, but it took, so he must be there.

  Now I launch (notice that myappnameicon86.png is gone since no icon is mentioned in the above XML code, it is not mandatory):

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf bg splashscreen1024.png - device 192.168.8.128

  Yet once, I get:

  error 101: Namespace is missing
  Error: Validation of the AIR is not

  Frustrated I get autour on the forums for answers, because the official documentation is nowhere getting me.

  I'm left with this:

  ===========================================================

  
  http://ns.Adobe.com/air/application/3.1">
      com.mydomain.myappname
      1.5.0
      
      My App name
      
      My App name
      
      
          myappname.swf
          standard
          fake
          true
          true
          landscape
          GPU
          fake
      
      
          myappnameicon36.PNG
          myappnameicon48.PNG
          myappnameicon72.PNG
      
      fake
      fake
      
          qnx.fuse.ui.skins.QNXDevice
          qnx.fuse.ui.skins.QNXNetwork
          qnx.fuse.ui.skins.QNXSensors
          qnx.fuse.ui.skins.QNXSkins
      
  

  ===========================================================

  Looks like the XML code that I use when I build for Android.

  First of all it doesn't have the tag root of qnx, but also nothing of the icons are of the required size (86 x 86). The tag required splashscreens and invoke target is also absent, to name a few. No idea of what the entire block of 'extensions' really do.

  Surely, this does not work:

  BlackBerry - airpackager.bat - package installApp - blackberry-myappname - new.bar - launchApp myappname-blackberry-bar - descriptor.xml myappname.swf QNXDevice.ane QNXNetwork.ane QNXSensors.ane QNXSkins.ane myappnameicon36.png myappnameicon48.png myappnameicon72.png bg-device 192.168.8.128

  Success in building the package BAR to my infinite surprise!

  He even managed to install on the Simulator. An icon for the game. However when it auto-couru the app went into landscape, thought for a second and then crashed (or you leave?) without a message.

  Perhaps because the required qnx tag was missing in the XML?
  Perhaps because images in the bg file could not be loaded?
  Perhaps because he had no permission to keep screen from dimming?

  I have no idea. I tried to add XML to qnx at the address previous to the bar - descriptor.xml, I thought that maybe he needed both the qnx block for when you run the application and the application block for when packaging. But now, he has complained of something like XML is not not clean ("' fatal error: markup in the document following the root element must be well-formed." ").

  So he came to it, I have to ask for help if I ever make the deadline of the Port-A-Thon.

  (1) how am I supposed to write the bar - descriptor.xml?
  (2) what command line starting by "blackberry - airpackager.bat" is OK to use?
  (3) all I have to do is build the SWF using Adobe Flash Professional CS6 and then pack it using the Blackberry SDK, right?

  First of all, there are two xml files that you need.

  One is called the manifesto, is to AIR and is called yourappname- app.xml. It is identical to the ones you use for Android and IOS, though some elements will be ignored. It's one you need to switch on the command line, and is probably causing the 'Namespace' missing error message. A file manifest a minimum is:

  
  http://ns.adobe.com/air/application/3.1">
  
      com.example.appname
      My Fabulous Game
      1.0.0
  
      FileNameOfYourSwfWithoutExtension
      YourCompanyName
      
          [This value will be overwritten by Flash Builder in the output app.xml]
          true
          false
          none
          cpu
          false
      
  
  

  Replace the text in red with your own stuff.

  The second xml file is called to the bar of descriptor. It is for App World and the installation process and is called bar - descriptor.xml. It contains information about signing code, icon, permissions etc. A simple bar - descriptor.xml is:

  
  
     
        none
        true
        landscape
        false
        cpu
     
  
     
     your-name-on-certificate
     your-id-on-certificate
  
     core.games
  
     
     1
  
     
     
        icon86x86.png
     
     splash-landscape.png
  
     
     2.1.0.1314
  
     
     access_shared
     access_internet
     play_audio
     set_audio_volume
  
  

  Make sure that you at least change the red dots.

• Launch KVM console: could not launch the application

  I have a UCS C220 M3S with MMIC 1.5 (4 d). When I try to launch the KVM Console, I get a popup with "unable to launch the application.

  Windows 7

  33.1 Firefox

  Update Java Version 8 25

  Exception:

  com.sun.deploy.net.FailedDownloadException: could not load the resource: https://10.85.162.187:443/software/avctNuova.jar
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.downloadResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Wrapped exception:

  javax.net.ssl.SSLHandshakeException: received fatal alert: handshake_failure
  at sun.security.ssl.Alerts.getSSLException (unknown Source)
  at sun.security.ssl.Alerts.getSSLException (unknown Source)
  at sun.security.ssl.SSLSocketImpl.recvAlert (unknown Source)
  at sun.security.ssl.SSLSocketImpl.readRecord (unknown Source)
  at sun.security.ssl.SSLSocketImpl.performInitialHandshake (unknown Source)
  at sun.security.ssl.SSLSocketImpl.startHandshake (unknown Source)
  at sun.security.ssl.SSLSocketImpl.startHandshake (unknown Source)
  to sun.net. www.protocol.https.HttpsClient.afterConnect (unknown Source)
  to sun.net. www.protocol.https.AbstractDelegateHttpsURLConnection.connect (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.getInputStream0 (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.access$200 (Unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection$9.run (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection$9.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.security.AccessController.doPrivileged (unknown Source)
  to sun.net. www.protocol.http.HttpURLConnection.getInputStream (unknown Source)
  to sun.net. www.protocol.https.HttpsURLConnectionImpl.getInputStream (unknown Source)
  at com.sun.deploy.net.HttpUtils.followRedirects (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doRequest (unknown Source)
  at com.sun.deploy.net.BasicHttpRequest.doGetRequest (unknown Source)
  at com.sun.deploy.net.DownloadEngine.actionDownload (unknown Source)
  at com.sun.deploy.net.DownloadEngine.downloadResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  at com.sun.deploy.cache.ResourceProviderImpl.getResource (unknown Source)
  to com.sun.javaws.LaunchDownload$ DownloadTask.call (unknown Source)
  at java.util.concurrent.FutureTask.run (unknown Source)
  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)
  at java.lang.Thread.run (unknown Source)

  Downgrade of Java 7 u21 (delete other versions of Java installed) and let us know.

  http://www.Oracle.com/technetwork/Java/javase/downloads/Java-archive-Dow...

  -Kenny

• Eception exception: Index 0 &gt; = 0 at the start of the application to the top

  Hi all

  I had a java application for blackberry work.  Only, I changed the package names and recompiled it again. There are no errors, but when I deploy him on my device (8320) and try it on the Simulator, it just gives ' Eception exception: Index 0 > = 0 at the start of the application to the top ' java.lang.ArrayOutOfBoundsException. Someone at - it an idea on this kind of behavior? Why change my package names only causes this kind of accident?

  Thank you...

  Thereafter;  I've shortened the name and the problem is solved. Y at - it limits the length of name of package in JDE BB?

• BlackBerry 8310 Smartphones: Impossible to reinstall the applications.

  Hello

  I was the proud owner of a BB 8310 for 10 days and am now the proud owner of a useless piece of modern art...

  Everything was fine until I connected on the BB site and tried to update the software.

  First, I downloaded the latest version of the Desktop software, then connected my phone to my computer and started the process of updating. Everything was fine so I went to the legendary coffee and when I came back found a message telling me that the connection was lost, I want to try again? Yes of course. And then everything started going downhill.

  Received the error app 200, the hourglass for hours.

  So to make a long story short, I tried to reload everything using the trick where you connect the BB without the battery. Well, he works to the charge process request where the Red led goes and I get the message that the connection has been lost. Try again? Yes. Wait he reconnects (hourglass goes round and round), reconnected... re - unplug and restart to load the applications.

  I noticed that the disconnection does not occur during the loading of any specific application but more or less randomly.

  OK, so after several attempts I cancelled the process and got this error message: fatal error, unspecified error [J:0 x 00000005]

  I tried on a PC with Windows 7 with Windows XP and even on a Mac.

  Still with me?

  Well, someone has an idea of what's going on? Y at - it a bug in my phone in the desktop application or downloaded applications?

  Beats me.

  Thank you

  Jean-Luc

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  Good luck.

• Crash when the application Look and display 2 - active up

  Hello, I spent a lot of time to reproduce this problem:

  SpeedGrade crashes when I apply one. Watch saved to a clip and I'm in the place 2 view. If I use the view Moussa, the accident will not occur.

  I have almost all Adobe programs installed the latest updates on Win 7 X 64 (latest drivers applied)

  SpeedGrade is open directly from first / a first project file.

  The things that I tried to solve the problem:

  1. turn on computer works ;-)

  1. turn off the application settings

  2 disable mercury gpu acceleration

  3. clear the cache and restart everything.

  .Log files don't have any useful information that I see:

  2015-07-06 [build 9.0x193 / 2015-05-26]

  Machine: XXXXXX-PC2 area WORKGROUP

  User: Dorian

  Mode: 64 - Bit

  Display: PCI\VEN_10DE & DEV_1183 & SUBSYS_35591458 & REV_A1

  Driver: NVIDIA GeForce GTX 660 Ti, Version: 10.18.13.5330

  CPU: Name: Intel (r) Core i7 - 4930 K CPU @ 3.40 GHz

  Model: 62, family: 6, step by step: 4

  Total topics: 12

  Features: MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES AVX F16C POPCNT RDTSCP RDRAND

  Base path: C:\Program Files\Adobe\Adobe SpeedGrade CC 2015\

  Arguments: "C:\Program Files\Adobe\Adobe SpeedGrade CC 2015\SpeedGrade.exe'

  17:07:12 [IrLog] initialized LogFile

  17:07:12 ["GlobalSettings"] loading C:\Users\Dorian\AppData\Roaming\Adobe\SpeedGrade\9.0\settings/User_Settings.xml user settings

  17:07:12 [DISystem] initializing Application object system...

  17:07:12 [DISystem] Adobe SpeedGrade CC 2015

  17:07:12 [AMTModule] during initialization

  17:07:12 [AMTModule] background of departure

  17:07:12 [AMTModule] background running task

  17:07:12 [IrOS] resources loaded from C:\Program Files\Adobe\Adobe SpeedGrade CC 2015\resources\Resources.irf

  17:07:12 [IrOS] local potential: 27 under license, 10 effective

  17:07:12 [IrOS] Localized string table de_DE successfully loaded

  17:07:12 [OpenGL] initializing OpenGL...

  17:07:13 [OpenGL] provider: NVIDIA Corporation

  17:07:13 [OpenGL] Renderer: GeForce GTX 660 Ti/PCIe/SSE2

  17:07:13 [OpenGL] Version: 4.5.0 NVIDIA 353.30

  17:07:13 [SDIOut] SDI output is not available

  17:07:13 [SoundSubsystem] has been initialized properly its subsystem.

  17:07:13 [SoundSubsystem] 3 sound (s) available

  17:07:14 [AMTModule] in idle state

  17:07:15 [AMTModule] background task is complete

  17:07:17 [headlights] initialization IPA...

  17:07:17 [headlights] IPA active and active mode

  17:08 [DSoundDriver] peripheral initialization 0: 44100 Hz, 16 bit per sample, speakers: [stereo], first channel: 0

  17:08 [DSoundDriver] device 0: opening DirectSound

  17:08 [DSoundDriver] device 0: prepare its buffer

  17:08 [DSoundDriver] device 0: buffer format

  Device loan 0 17:08 [DSoundDriver]

  17:08:01 [DirectLink] using CUDA accelerated renderer

  17:08:01 [DirectLink] device name: GeForce GTX 660 Ti, Type: GPU, provider: NVIDIA

  17:08:01 [DirectLink] memory: 3072 M, computing capacity: 3, driver Version: 7.5

  Please let me know if you need more information. I would like to find a solution quickly!

  Good job on the post, but I HOPE that you have completed a bug report in this...

  /Feature bug report form requires Adobe...

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  Neil