Fatal blue screen need help

Hello to the members of my community, I was literately at my wits end with this problem without fatal end of the SCREEN as well as ongoing nightmares with crashing, missing files, spyware and the inability to run a boot image and own factory installation. I was being sent into circles by Microsoft and Dell, my Dell XPS One A2010 bought directly at the factory with a pre installed Windows Vista Home Premium it was all good, well except for a faulty on these models fan, but not current pop ups, emphasizing the fact that the same Windows Vista I paid for by Dell when I bought my PC was know not valid. I can't do the security updates, my computer crashes, lost files, the amount of data and a ton of time troubleshooting this issue now underway at least 2 months. I contacted both Microsoft and Dell only to be sent in circles, they say that it is the responsibility of the manufacturer and Dell has a good point that everything was fine until the part of the service pack updates through Windows Update as urgent and potentially dangerous, unless that downloaded to protect my safety and performance on my PC with VISTA! I'm ready to pull my hair, I'm not even an online base w/o application level of spyware, virus, remote access, missing or damaged files and my favorite of all the SCREEN actually FATAL BLUE I have upward all night tried to solve this problem. Is it possible at the start of my old software from my last PC, Windows XP PRO sp1, I'm so tired of having one bad thing after another, I'm on someone elses laptop writing this post and I can't do the repairs in the factory image, I have no disk and I can't AFFORD to JUST RUN OUT to BUY UPGRADES. NOT TO MENTION THE FRUSTRATION OF FAILURE FOR SEVERAL MONTHS. PLEASE SOMEONE... Help! Thank you, K

Hello

All attached files of the DMP are the error checking VIDEO_TDR_FAILURE (116) .

Before going into that, c:\windows\system32\drivers\sptd.sys is in your list of drivers loaded. It comes from the pass through Direct host SCSI - Daemon Tools (BSOD problems with Win7). Uninstall this driver with the following tool-

http://www.duplexsecure.com/downloads/

If the above is not enough, the basic definition of a bugcheck 0 x 116 is:

There may be a bug in the video driver or video material.

So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

Timeout detection:

Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

Preparation for recovery:

The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

Recovery of funds:

The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

Article here.

That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

The following hardware problems may cause a TDR event:

1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

GPU tests: Furmark

RAM test: Memtest86 +.

3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

HARD drive Diagnostics: http://www.carrona.org/hddiag.html

To reset your swap file, follow these steps:

(a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

-Then click on the Advanced tab.
- then the Performance Settings button.
- then on the tab advanced following.
-and then click the virtual memory button.

(b) in this window, note the current settings of your swap file (so you can restore them later).

-Then click on the option button "No paging file", and
- Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
-Click OK to exit the dialog boxes.

((d) then go back following the directions in step one) and re-enter the settings that you noted in step

(b) follow the steps along the (and including) the reset.

(e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

Run the System File Checker:

SFC. EXE/SCANNOW

Click on start and type "cmd.exe" (without the quotes)

At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

Let the program run and after return what he says when it's done.

-Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

-GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

The following software issues can cause a TDR event:

-Incompatible drivers of any kind (two GPU, sound, etc)

-Messy registry / corrupted

-DirectX bad files (uninstall and reinstall DirectX)

-bad system files (System File Checker - has been run on it)

-Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

Kind regards

Patrick

Tags: Windows

Similar Questions

Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

Solution:

1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

3. type: BATCH spuninst.txt

4. type: exit

Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

-Tom Steele
http://www.hawkandtom.com Tom Steele

Error fatal blue screen - Stop: C000021a

Hi 'think that did something stupid to my pc (windows XP) I get the blue screen saying' STOP: c000021a {fatal system error} the windows logon system process ended unexpectedly with status 0xc0000034(0x00000000 0x00000000). The system has been shut down) then I have to turn off my computer and the same message arrives, I tried F8 to get to the screen and when I try all the different security modes, he keeps back to the blue screen error message, any help pls I have files I need this computer and I need my computer?.

Just remembered my comodo Security told me that the file winlog.exe had a Trojan horse could not deleate it was therefore renamed as 2, then it after about 30 minutes and that's when events above

Hello

All your answers above did not help, because can not access any part of my pc to the action of the command prompts

a friend of a friend who is a computer scientist came with his xp and started recovery from that disk and replace the missing file of winlogon.exe and my system is kind of back to normal, even if now my comodo internet security to report this file as a Trojan horse and to clean , but still reports it as a Trojan horse which is what did me in this mess to begin with.

Impossible to solve this problem of blue screen. Help, please!

Help! I am running Windows7 and receive a blue screen error message. I ran all maintenance windows and repair programs and have a lot of memory and RAM. This happens especially during the games.

Here is the message I get:

Signature of the problem

Problem event name: BlueScreen

OS version: 6.1.7600.2.0.0.768.3

Locale ID: 1033

More information about the problem

BCCode: 50

BCP1: FFFFF80003865A80

BCP2: 0000000000000000

BCP3: FFFFF80002EDC437

BCP4: 0000000000000002

OS version: 6_1_7600

Service Pack: 0_0

Product: 768_1

Files helping to describe the problem

C:\Windows\Minidump\111712-19578-01.dmp

C:\Users\XXXXX\AppData\Local\Temp\WER-63742-1.SysData.XML

I tried to access the site of minidump and could not open and searched the web for the program to open the site, but could not locate a.

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

If you are overclocking stop. (chances are that if you are unsure if you are, you are not)

To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy.
* Join ZIP archive to your message by using the button (attachments) "trombone".
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
(Instructions for XP, Vista, Win 7, Win 8)

HP G71 VM114UA #ABA: blue screen need disable password of admin and 79275546

I get a blue screen when I turn on my laptop. She asked an administrator or user password and I'm not either. I turn off the system with the 79275546 #s you please help me with this. I have pictures of my husband who died on what I'd really like to see. Thank you so much!

Hello

Enter 66153588

Kind regards

DP - K

Computer update downloaded vista crashed all I get is blue screen please help!

I downloaded an update about 4 days on my daughter's computer. Now, Vista does not load, I get a blue screen saying Windows has been shut down to avoid damage to the computer, it gives an error 0X0000C1F5 shutdown more it give fixing options like Unplug appliances and start in safe mode, but none of it works. I tried all the options in the F8 menu, I tried F12 and I also tried to use a new Windows Vista disk to start. I also ran the repair of the system and checked every option it gives under the menu in advance. Someone please help me I am at a loss. How an update to do this. I know that this is not a virus, because I did an audit of security with CA and done a defrag through the system until I installed updates. It was my weekly check for the computer that day.

Please help soon!
Thank you!!!

Windows Update Forum:

You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

In this way, you will receive the best help.

See you soon.

Mick Murphy - Microsoft partner

Constant blue screen, please help!

For these last months, I get a blue screen that is associated with a memory error. I lowered the score of 10 to 7, hoping to solve the problem, but it continues. My ideas, please help!

Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.256.48
Locale ID: 1033

More information about the problem:
BCCode: 1a
BCP1: 0000000000041790
BCP2: FFFFFA800C9DE030
BCP3: 000000000000FFFF
BCP4: 0000000000000000
OS version: 6_1_7601
Service Pack: 1_0
Product: 256_1

Files helping to describe the problem:
C:\Windows\Minidump\111215-10779-01.dmp
C:\Users\PC\AppData\Local\Temp\WER-35475157-0.SysData.XML

Hello

Thanks for posting your query in Microsoft Community.

From now on, I would ask to refer to the troubleshooting steps outlined in the article below which will help you resolve stop (blue screen) errors.

Resolve stop (blue screen) error in Windows 7

Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

To fix the blue screen please help me.

My computer has randomly several times projected blue. I have the error code but don't know how to fix what's wrong. Help please? Error: 0x0000001E (0xFFFFFFFFC000000, 0x000000007EFA00001, 0xFFFFF8000306266B, 0 x 0000000000000000)

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop. (chances are if you are unsure if you are, you are not) a
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump". We need at least 2 FILES DMP to diagnose and confirm

The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy.
* Join ZIP archive to your message by using the button (attachments) "trombone". (if available on your site, MS has this)
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

Link to find out how to download below.
http://www.WikiHow.com/use-SkyDrive

To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.

Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP

System specs are extremely useful then please include everything you know.

The Zigzag3143.com team

I get the message on the screen, invalid boot.ini.file, booting from C:\windows,can not start window, white screen, need help

the error on the screen of the invalid boot.ini mpfprojectdir\dev10\src\csharp\projectbase.file come on and outside, white screen, can not re start, the DVD player does not.

the error on the screen of the invalid boot.ini mpfprojectdir\dev10\src\csharp\projectbase.file come on and outside, white screen, can not re start, the DVD player does not.

Click on the link below and follow the instructions to create a startup disk best for repair/restoration of Windows CD. A when you're finished, place the disc in the cd rom of the damaged computer and then restart your computer. The computer will automatically boot from the disk. When the menu screen is displayed above and the arrow keys on the keyboard to scroll to ERD Commander, then press ENTER. Allow ERD load. This can take some time. You will be asked to select the operating system to load. If you have only one option will normally be C:\windows. You will also see a screen to configure the network settings. Click Ignore to skip the procedure. RPD will load windows. Once loaded click Start > system tools > repair of system files. Allow the repair. If there is no error detected file click Start > system tools > system restore. Follow the prompts to perform a system restore, selecting the last possible date. Restart the computer without the disc.
http://www.repairbotsonline.com/tools-and-software-section-F13/best-boot-disk-to-repair-restore-Windows-CD-T192.htm
I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

Blue screen please help me BCCode 1A

I may need a minidump but forgotten how this is basic info

BCCode: 1a
BCP1: 00005003
BCP2: 8B 400000
BCP3: 00008616
BCP4: 08634C6C
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Information about the server: 626e4259-48a3-4c82-ba27-1eaadd47fed3

BTW, in my Local disk c, I have two folders Nvidia who says just Nvidia and other Nvidia (28) would this is causing problems?

I also ran Microsoft Memory diagnostics without error.

Hello

What size power supply do you have? Is it enough for the devices in the system?

After reviewing the determination of the power supply, you will then need to check
motherboard and peripheral requirements. The video card is usually one of the
large power users.

How do you determine what is from my diet?
http://www.computerhope.com/issues/ch000800.htm

Other good sources of information are manufacturers of devices places and their forums.

eXtreme Power Supply Calculator
http://extreme.outervision.com/psucalculatorlite.jsp

Power supply calculator
http://educations.Newegg.com/tool/psucalc/index.html

Choose the right diet for your computer
http://en.kioskea.NET/FAQ/588-choosing-the-right-power-supply-for-your-computer

How to test the power supply in my computer?
http://pcsupport.about.com/od/toolsofthetrade/f/powersupplytest.htm

-------------------------------------------------------------------------------------------------------------

There are methods very detailed in the troubleshooting guide I posted above and you must use
These methods to try to resolve the problem. Carefully check the memory, run Driver
See and use the other methods if necessary.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

computer HP pavilion dv4 laptop has this thin line at the bottom of the screen, need help?

Hello, recently my HP Pavilion dv4 has been glitching, theres this thin line at the bottom which is a whitesh and flashes very quickly. At first I thought it was because of overheating because of the summer, but I'm not so sure most since the weather has been kind lately.

Thank you!

I'm sorry but that's the problem with the display panel. You will be able to solve this problem by replacing the display panel only.

If your laptop is still under warranty then please contact HP. How to do?
Click on the link below and choose your country:
Contact HP worldwide

I installed Lightroom 6. After you import a photo that I pressed the tab 'developing', all I get is a blue screen. Help, please.

I can still develop my pix

This has been asked and answered repeatedly... the forum has a search function... Tip Forum #1 on the main page of the forum hereLR.

Disable GPU acceleration: using Adobe Photoshop Lightroom | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

Deadly blue screen (professional assistance)

Hi, I have a CQ60-116EE with P/N FY419EA #ABV and I have collected all the Xp drivers successfully, but before I started the downgrade to xp

I did a stupid thing by upgrading the Bios of A F.25 to F.32

Then I started from the xp CD, but I got a white screen while the dvd - rom reads CD

and what is happening until I get a fatal blue screen there is a hardware problem and so I rebooted and get my system Vista hated again

I don't know if the upgrade of the bios was the reason to get the screen empty rather than the screen normal installtion

SO my question is, is there is something wrong with the computer screen, and that's why I'm gettign the blank screen or

There is something wrong with the update of the bios.

Any help please

Message edited by CQ60-110ee 2008-12-31 04:54
Message edited by CQ60-110ee 12/31/2008 12:54

Okay, that was just the sata drivers, made download and used nlite to put it inside the xp installation

Mini-vidages blue screen constantly... windows stops uexpectedly

Windows stops unexpectedly and causes a discharge mini fatal blue screen... I can bring him back, but it won't go in mode 'sleep' and shuts down... This has happened after a Windows Update.

It can also help to look at the files minidump against accidents with a debugger.

Can you zip the minidump in the C:\Windows\Minidump folder files and (provide link) available via Windows Live SkyDrive or similar site?

The following link has information about the use of Windows Live SkyDrive:

http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

If you have problems to compress the minidump files copy the minidump files to another location such as a folder on the desktop

In addition, you do not necessarily have compress the minidump files, you can download one at a time.

Blue screen error 0x0000007F When using Windows Media Player

original title: need help w/video

my hp Pavilion a1240n crashed to the point that I had to replace the hard drive and reinstall windows xp, then go to 7. After 2 1/2 weeks of the trial, I am still unable to play a dvd, or get a video game to play. If anyone can help me, chk the specifications of what I have and give me some options on what I can try. The last time I tried WMP, I received a stop message 0x0000007f blue screen. Help!

A few quick to test things:

Test your memory with a memory tester. Something like http://www.memtest.org/ perhaps, or an equivalent.

Update your graphics card and sound card drivers to the latest W7 drivers available at HP for your PC.

As test, download and install (free) VLC. Can do this reading of videos? In a first time, as this is just a test, do not let 'take over' as a default player until / unless you're happy with it. Just manually open a video with her.

If you look in what is your WEI score and the base system in detail, i.e. amount of version W7 ram, CPU, and what is your GPU card?

Basic details of 7F - http://support.microsoft.com/kb/137539

Armed with a little more information, a person may be able to help more.

Fatal blue screen need help

Similar Questions

Maybe you are looking for