Fatal error in ACAD 2000

While working in the ACAD 2000, a message appears. Fatal error. AutoCAD cannot continue. Unhandled error e06d736h exceptional 75a2fbaeh

Hi avaleela,

If it works well before?

I see that AutoCAD 2000 is not compatible with Windows Vista; You can check the link below

Windows Vista Compatibility Center link

Method 1: You can follow the steps mentioned in the links below that addresses this question

http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=11322398&LinkId=9240617

http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10296542&LinkId=9240617

Method 2: You can run the program in Windows XP compatibility mode. You can see the steps mentioned in the link below
Make older programs in this version of Windows

Thank you, and in what concerns:

Ajay K

Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Windows error message: fatal error during Microsoft Office 2000 Setup

    Virus protection removed a Trojan horse.  Therefore, Office 2000 is damaged.  From Control Panel - Add/Remove program, I tried to fix it using the Office 2000 disc but it hangs as it tries to set up.  He ends up giving error - installation failed due to a fatal error. Operating system is Windows XP

    Office 2000 programs are working except cannot enter into Excel.

    Just fixed it.  I took the survey and decided to google the error message #1305.  Follow-up of the steps for error reading file to Microsoft Support http://support.microsoft.com/kb/248263

    Disk Cleanup and player.  It is loaded after the cleaning.  The cost of repair shop would have been almost the cost of the ultimate office for my new system.

    Bleak Morn & JoelJ1964 thanks.

  • AutoCad 2000. error message: error in AutoCad abandonment: FATAL ERROR: unhandled exception e06d7363h in 7667fbaeh.

    AutoCad 2000 worked on my laptop HP Pavilion/Vista for over a year but recently when the program is open to an error message is displayed: "AutoCad error interrupt: FATAL ERROR: unhandled exception e06d7363h in 7667fbaeh. AutoCad will not run.  AutoCad will run with the original program disk in the drive.

    I tried to run the program in Windows compatibility, but it makes no difference.

    Hi Racerman,

    This error can occur if the value of the variable VIEWRES is too high. You can try the following steps and check if it works.

    To resolve this error:

    1. click on Start and type CMD in start it search
    2. right click on CMD in the list then select programs, run as administrator.
    3. type VIEWRES on the command line.
    4. press ENTER when prompted for Fast Zooms.
    4. enter 100 when you are prompted for the circle Zoom percent.

    If the problem persists, you may need to get in touch with forum Auto Cad for assistance.

    For more information, you can consult the following link:
    http://discussion.autodesk.com/forums/category.jspa?categoryID=8.

    Note:  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope this information is useful.

    Boumediene. K.
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

    I'm familiar with Oracle databases, but still learning my way around PeopleSoft administration.

    After validating the connection information of database with sqlplus from the same platform, psadmin application server start command generated an error message in the console.

    tmboot: CMDTUX_CAT:827: ERROR: fatal error occurred; launch the user error handler

    After the attempt failed to start the 8.49 application server, the journal entries were:

    PSAPPSRV.55837058 (0) [28/09/15 09:30:31] (4) the Configuration of server settings: {Journal

    Ging level = 5, sql trace = 12319, mask of trace sql client = 12319, peoplecode trace = 0,

    mask trace client PC = 4095, timeout = 300, County recycling = 2000, max such svc fail

    ures = 2, ORACLE, database name database type of == 'DBXX', database server = ", id = user

    'PXXXXX', connect id is "CXXXXXX"}

    ...

    PSAPPSRV.55837058 (0) [28/09/15 09:30:32] (1) GenMessageBox (0, 0, M): If the database

    gnon: could not sign database DBXX with user PXXXXX.

    PSAPPSRV.55837058 (0) [09:30:32 ago] (0) 28/09/15 start the server failed

    PSWATCHSRV.6685110 (0) [28/09/15 09:30:33] closing

    PSADMIN.58196170 (0) [28/09/15 09:30:39] (0) attempt to end on the dbxx field boot

    While the connectivity of sqlplus had tested OK from a client, PeopleSoft Signon pside.exe two levels on the same client Windows resulted in Invalid User ID and password for the access code.

    The psaccessprfl table had been updated with the connection of data validated by using a platform application server dms shell script.

    The area has been configured using the application server platform psadmin.  UserId, UserPswd, ConnectID and ConnectPswd had been entered and verified.  Passwords have been encrypted by the suite.

    The psoprdefn table showed correct SYMBOLICID uppercase and ACCTLOCK is zero on behalf of PXXXXX.

    The psaccessprfl table showed too correct SYMBOLICID.

    The psdbowner table showed the DBNAME and OWNERID both uppercase.

    The values encrypted in the database matched other environments on the same server platform.

    Why app server not sign to the Oracle database?

    Using the pscfg.exe, Manager of the Windows client configuration utility, I selected the 5 first checkboxes dialog SQL Trace on the left side of the tab of the Trace, I entered the name and location of the trace people tools to create and store the output of client sessions on the same tab.  Then tried another connection to the database, using the pside.exe utility.  The text resulting in the newly created text file showed the last executed statement was a select on the table psdbowner.  I removed my trace entries using pscfg.exe to stop tracing.

    Using the information provided by the last executed statement, I ran a request and discovered that the length (dbname) for the value of the column in the psdbowner table was one character longer than the expected value.

    After update the column value by removing the end interval, the utility psadmin on the server worked without error.

  • VMware Workstation 11 fatal error

    Whenever I try to do a virtual machine with Windows 2000 / ME or lower, Workstation refuses to start it

    I got this error message when you try to configure Windows 2000 to today:

    Fatal error VMware Workstation: (vcpu-0)

    vCPU 0: CHECK vmcore/vmm/main/cpuid.c:382 bugNr = 1036521

    A log file is available at 'C:\Users\XXX\Documents\Virtual Machines\Windows 2000 Professional\vmware.log.

    You can request support.

    To collect the data to submit to the VMware support, choose "Collect load data" in the Help menu.

    You can also run the script 'vm-support' in the folder my computer directly.

    We will respond on the basis of your entitlement to support.

    Does anyone know how to fix this? There is no solution on the internet that I can find to thisvmware

    Try to set the preferred mode (VM-> settings-> processors) "Intel VT-x/EPT or AMD-V/IVR."

  • Fatal Error 2343 trying to remove from the PC Icloud

    Hi, when I try to uninstall from your PC Windows 7 icloud he puts an Error 2343 then alert to saying fatal error. It doesn't let me repair or install new implementation of the same error message?

    See if that helps - r-code-2343-message-when-trying-to/996dc521-9a03-4914-b2f6-dbf2b5293730?auth=1 http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/erro

  • display messages to fatal error to try to go to a Web site

    Fatal error: unknown: impossible using the output control in the the output control to display managers in unknown on line 0

    http://www.sweetgeodes.com/
    http://www.sequimplants.com/
    http://www.sweetgeodes.com/Senft/

    This error message appears when I try to access the first link of domain that I show. I can't get on the site, but can my other two and the third link is a sup/file under that isn't reachable for change or display in WordPress.

    Win 7 32. just what is happening. No problem with the old version. That's happened with this new "update".
    I CAN work on the site using IE8. Something is flaky... Deleted history and cache. It worked. This morning he didn't. Duck Duckgo is my search engine. and I use ghostery.

    Preferred e-mail address is [email protected]

    Your comments?

  • HP Probook G3 core i5 430: Fatal Error - Hp connection manager.exe

    An error message "Hp ConnectionManager.exe - Fatal error appears on my screen often after I started to use the new laptop (7 days ago) and ugraded to windows 10 provided with the s. addition"a fatal error has occurred, check Hp connection manager in the event viewer for more details.

    How can I resolve that it is very frustrating to see this message.

    Hello

    Please go to programs and features and uninstall HP Connection manager note also this software isn't always compatible with windows 10.

  • Photosmart C4400 Fatal Error download drive, Windows Vista

    Operating system: Windows Vista 32-bit

    Printer: Photosmart C4400 (I have had no other printer software on my computer)

    Problem: I can not download the driver (from the included CD) on my computer.

    Step 3/4, 94%, I get a fatal error Message:

    MSI. Scan

    Microsoft.vego.STL, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9alel8e3b" version = "8.0sc727.91", type = "win32".

    Error situation coade 20218093

    What I tried: disable the firewall, by downloading the reader from HP site, try the message error MSI listed on the HP site. All to nothing does not.

    What should I do to correctly download the driver? BTW: The printer works when I use a memory card.

    Thanks for all the solutions!

    try to download the latest version of msxml for windows, and then try to reinstall

  • Compaq mini 110: fatal error CNU9383FPY comps mini 110

    Fatal error message. Allows me 3 entries in password - suggested on this forum. I've tried at least 6 passwords - no work and then fatal error message and can't do anything other then go and turn it on again

    @Dommyache

    Enter e9lofuf82i (3rd character is a lowercase L)

    Kind regards

    DP - K

  • Tecra A9 - Blocking Power Saver - fatal error code: 0 x 2

    Hello

    Today, when I turned on my computer the energy saver has started planting.
    I rebooted the computer several times and the result is always a fatal error has occurred. The program will end. Code: 0x2.

    Even this error appears when I try to reinstall the application.
    Perhaps it has something to do with SP3, I have installed a couple a days ago.

    Someone has an idea?

    Martin Vassilev.

    I saw this error for a long time with Windows XP Home edition. In my opinion it has nothing to do with SP3.
    My experience says that you will not be able to solve this problem. There is something wrong in the registry entries and reinstalling will not help.

    One method can help, OS install new one, more radical using recovery media.

  • Fatal error HP Connection Manager

    I have a new computer HP DV7 laptop, Windows 7 premium. I clicked on and installed the HP connection manager who immediately started my receiver error fatal to this topic. So I did a factory reset computer overall.  Like a fool, I clicked on the HP connection manager again and installed a second time... Once again the fatal error messages. So, I found an uninstall uninstall program online, Revo and completely uninstalled.  So far no error more but do I have the HP connection manager? What is doing? I hope you can help me if I need reinstall it and check that the fatal errors go away. If I do not need, great! I was wondering if my impulsive removal is OK or not?

    Hello

    There are some things you need to do before you start using the HP connection manager.

    1. first download and install Microsoft .NET Framework 3.5 SP1 from here and restart the system.

    2. download andi install HP software framework from here and restart the system.

    3. When you steps above to download and install HP Connection Manager from here.

    Note:

    This software allows to control easily all wireless devices, but it is not necessary to have it in the system.

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

    Hello

    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

    Hello

    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • Satellite M70-173 - fatal error - new drive HARD and recovery.

    Excuse my lack of knowledge.

    I received a Satellite M70-173.

    to turn on before charging readings - fatal error; I have to save all my data and replace the hard drive.

    I don't know if it's fixable and that's what I have to do. I also said that when you replace a HARD disk I need a recovery disk.

    I reside in Cyprus and don't have is not easy access to the shops of style PC big supermarket.

    I was wondering if I could use a generic HDD and if so is there a particular one that I need to acquire?

    Also

    where would I go to get a recovery disk?

    I got the laptop I can't afford to buy a new one at the moment and it is still in very good condition apart from the above-mentioned problems!

    I wish that all the advice on what type of HARD drive, I would need or is available - rough cost so I don't get ripped off and if we change the disk HARD is as easy as I read. Also where I should go to get a recovery disc and if that's all I need to fix the laptop.

    Thank you very much in advance for any help I can get.

    Peter

    > The laptop does turn on - is it possible to make a recovery of a damaged laptop disk

    How do you do if you can't turn on the laptop?

    What you could do is to remove the HARD drive, then place it into the drive enclosure HARD 2.5 external, then connect the HARD drive to another computer, to save the data.

    In my opinion this is what you could do

  • I am not able to connect to a Web site: fatal error of java

    And a file is created on my laptop with this piece of information desk

    A fatal error has been detected by Java runtime environment:

    EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d413c22, pid = 1604, tid is 11148

    JRE version: 6.0_14 - b08
    Java VM: Java hotspot Client VM (14, 0 - b16, mixed mode, sharing windows - x 86)
    Part of the problem:
    C jp2iexp.dll + 0x3c22

    If you want to submit a bug report, please visit:
    http://Java.Sun.com/webapps/bugreport/crash.jsp
    The accident happened outside the Virtual Machine Java to native code.
    See problematic frame for where report them the bug.

    * S Y S T E M *.

    OS: Windows 7 Build 7601 Service Pack 1
    CPU:total 4 (8 cores per processor, 2 threads per heart) 6 37 2 family model stepping cmov cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, ht

    Memory: 4 k physical page 4052588 k (1785076 k free), swap 4194303 k (4194303 k free)

    vm_info: Java hotspot Client VM (14, 0 - b16) for JRE windows - x 86 (1.6.0_14 - b08), built on May 21, 2009 08:03:56 by 'java_re' with MS VC ++ 7.1

    time: Fri Jan 13 15:03 2012
    elapsed time: 0 seconds

    + The message was edited: information not useful has been removed.

    Look like a Java problem.
    Uninstall the Java runtime environment, restart the computer and reinstall Java Runtime Environment

Maybe you are looking for

  • Satellite A500 - Flash cards do not work after the upgrade to Windows 7

    Hello I have a Satellite A500 PSAM3A 04200E. I recently did an upgrade from Vista to Windows 7. I used my system restore disks to reinstall Vista and then upgrade to Windows 7 using the upgrade wizard. I find that I can no longer use the Fn key to tu

  • Satellite L40 - unable to boot after cloning HDD

    Hello I tried to clone my hard drive using Norton Ghost 15 and managed to bumble big time. Now when starting, I get a message saying windows do not regonize boot sequence. Enter in the instalation disk, choose the language and click on fix my compute

  • HP officejet pro 8600: office pro scan 8600 jet will allow to add pages in PDF format

    Before I upgraded to Windows 10 my scanner enabled me to add new pages to a PDF document before you save it.  Now, I have to make a separate PDF for each page of my document.  I already deleted and reinstalled my camera and used print and scan doctor

  • LabVIEW search the same file over and over again

    Hey guys,. I'm close goes crazy. I'm working on the RT myRIO system and to link the bitfile reference to the type definition. If I want to do, a window opens and he seeks a .ctl, but not one that I bind the reference to. But it never finds, I can loo

  • Deletes the file datalog

    I did experiment with the Panel before auto logging feature, I have no bad to save data to a file in a vi and recover, BUT I can't seem to be able to delete the log file of the top-level vi.  I get the message file that is already open, but I don't s