Fatal error. Object was not found.

Similar Questions

• ACS 5.2 error 22056 object was not found in the identity applicable store (s)

  Hi, I have two ACS v 5.2 (primary and secondary) and some users are in stor in-house and others are in the ad.

  Local site topology is like this:

  PC - AP - WLC - ACS - AD

  Authentication method is PEAP(EAP-MSCHAPv2), and all users have the company certificate installed. In users of client OS is Windows 7.

  Users worked very well, but some reports disconnections of intranet users. I see in the ACS connect many "22056 object was not found in the identity of the point of sale." and "24415 Active Directory user authentication failed because the user account is locked out" alarms.

  I thought that it was because the user located in the AD of basic data, but sometimes the same user is authenticated successfully and other that I see the "22056..." or "... 24415" alarm signals.

  I changed the primary role for ACS to works as secondary and we see the same alarms.

  I Don t know is a matter of ACS, and how to resolve this...

  Please helpme

  Thank you...

  Hello

  How you are authenticating these users? They are present in the local database of GBA? If so, have you checked the State from inside account to see if the user account is still active and that it is not disabled?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Error: Type was not found or was not a compilation constant: AlertDialog.

  I tried to compile one of my PlayBook AIR applications using the SDK of AIR BB10 tonight and got:

  Error: Type was not found or was not a compilation constant: AlertDialog.

  The command I used to compile was:

  Set JAVA_HOME = e: files (x 86) \Java\jre7
  set PATH = % PATH %; E:\Program Research In Motion\blackberry-tablet-sdk-3.0.0\bin

  CD E:\Users\Daniel\Dropbox\Apps\iTunesSync\Version0.3
  mxmlc + configname = air - library-path +=. iTunesSync.as o iTunesSync.swf - swf-version = 10

  This works if I use the SDK 2.0.0, but doesn't if I'm using 3.0.0.

  Strange.

  I confirmed that AlertDialog is always present:

  https://developer.BlackBerry.com/Air/beta/APIs/QNX/dialog/AlertDialog.html#includeExamplesSummary

  In BB10, device skins (and others) require the ANE must be loaded with the installation.

• A snapshot could not be created. Check the event logs application VSS amd SPP for more information. Details: the specified object was not found.

  I get this message to 5 seconds after attempting to back up using a Seagate external hard drive. The drive has plenty of space (1 TB) and is formatted NTFS. System recognizes no problem when I Plug and I can move files to and from it no problem otherwise.

  No other thread does deal directly with this version of the problem (with the object "not found"). Any help or ideas are appreciated.

  Hello

  This occurs generally when the Volume Shadow Copy service and SPP services are not started. We will analyze and identify the cause of the problem.

  I suggest you perform the steps mentioned by "Diana D replied October 23, 2010" to a similar discussion.

  Reference:

  snapshot could not be created Details: the specified object was not found.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/shadow-copy-could-not-be-created-details-the/a55057f8-67ed-4FA3-b61e-15f8904aaba1

  Note: Make sure you put in road security software and Windows Firewall later once you are finished with the test.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost. When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  See also:

  Back up and restore frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  Hope this information helps. Response with status so that we can help you.

• Fatal error: Class 'JRequest' not found in /.

  I just installed and updated Premium CS5. I'm a Joomla! Web designer and am looking forward to using LIVE VIEW. Every time I open a Joomla index.php file and connect to a server, I get this message: Fatal error: Class 'JRequest' not found in / (directory).

  I clicked on the link DISCOVER and still got the error. I searched "jrequest" in the forums and found nothing.

  You don't need to set the parameters of Live View. That is only necessary when you test pages requiring variables passed through the URL, or through the POST method.

  Implementation of Dreamweaver CS5 to work with a CMS such as WordPress, Drupal or Joomla!, is very easy. Dreamweaver manages a CMS in exactly in the same way as a browser. Everything happens through index.php. To do this, Dreamweaver needs to know two things:

  • The physical address of the root of the site.
  • The base URL that points to the same location.

  It is recommended to work to set up a local test environment, using XAMPP, Wamp, MAMP or a similar montage. I use Joomla!, but I set up a test installation to check for one of my books. The Joomla! files are located in C:\xampp\htdocs\joomla\. In the Site configuration dialog box, the test server uses the following parameters:

  • Connect using: Local/network
  • Folder on the server: C:\xampp\htdocs\joomla\
  • http://localhost/Joomla/
  • Advanced: PHP MySQL server model

  Because Joomla! discouraged use PHP code, you must also create a file .htaccess with the following content:

  php_value display_errors off
  

  If you use a remote installation as your test server, you must connect using FTP or SFTP. In the definition of the test server, enter the details of the FTP, you need to access the server.

  Since your Joomla! site is located in public_html, the value entered in the root directory must be all that your Web host tells you to go to the root of the site. In some cases, you can leave this field blank, because your login takes you there automatically. In other cases, you may need to enter/home/username/public_html.

  The value entered in Web URL is the base URL for your site. In the case of example.com, it would be http://www.example.com/.

  I have not tested a Cluster using a remote server, but I think you need to copy index.php in your local site folder. You open index.php in the Dreamweaver Document window, and then click Live View. Dreamweaver displays the site in Live View mode and connect to the test server. To navigate to other pages in the site, hold down the CTRL key when you click on the links.

  The mistake that many people make is to try to open a page directly in Dreamweaver. It does not work. You need navigate to the page in the same way as a browser. However, if you know the URL of a page, you can enter it directly in the field address bar of the browser in Dreamweaver.

• Error: Type was not found or was not a compilation constant: PieChart.

  Hi all
  
  I get an obtuse error message from the compiler again. I get
  
  Error: Type was not found or was not a compilation constant: PieChart.
  
  For the following code
  
  < mx:VBox >
  < mx:PieChart id = dataProvider = "{parentApplication.services.webservice.getDealData.lastResult.SeriesVO"dealsPieChart"}" showDataTips = "true" > "
  < mx:series >
  < mx:PieSeries labelPosition = "legend" field = "count" field name = "name" / >
  < / mx:series >
  < / mx:PieChart >
  < mx:Legend dataProvider = "{dealsPieChart}" / >
  < / mx:VBox >
  
  I don't know what I am getting this error. According to the examples that I read on the site of flex on the charts all seem fine. Any pointers welcom.
  

  OK - I think that I n "t have the component graph charting. It looks like a separate download. The is not going to be open comes? If this isn't the case - first bad sign for me of the authenticity of the open source moves.

• object was not found while trying to install lightroom

  Wow, adobe support is really bad. I have not used all the products adobe over the years. I finally decided to try Lightroom, he bought online and I'm unable to install. I get the error message "object not found".

  I've seen a lot of these same questions on the web, but not a resolution... Any ideas?

  Thank you, but I thought about it. It seems that Microsoft Updates-ITMU installed a patch that prevented the installation program to function properly.

• When you use a set of accounts, get error "provider was not found.

  I use Windows 7-64 bit.

  I had been using a set of accounts a month ago, when I started having 'provider cannot be found. It cannot be installed correctly. The package is in program files (x 86) then I guess that it is 32-bit.

  Their support team said I need "Microsoft Data Access / JET of objects ' but I don't understand how these things can have deserted.

  I think that the Jet is part of windows 7 and so I don't think that I can download.

  I ran the System File Checker and who found a hash with msjint40.dll problem but it could not fix it. He says that the source file in the store is also corrupt.

  What is going on? Msjint40.dll (winxsx/Syswow64) files do not look as if they have changed recently - 14/07/2009.

  The problem of hash can cause a provider not found message?

  What happened and, more specifically, how do I do?

  2012-10-05 16:52:42, CSI 0000029f hashes for Member file Info? \C:\Windows\SysWOW64\msjint40.dll are not real file [l:24 {12}] "msjint40.dll": "

  Found: {l:32 b:4co68RsJJzz / 05RpZb1lX48bQFAlpOhNYOhLRTD0T2o =} expected: {l:32 b:hz / peGdAuJRqXXf8RXlIEtc + 8CQBNBHngjeC5skUVWc =}

  2012-10-05 16:52:42, CSI Info a 000002-0 hashes of file members \SystemRoot\WinSxS\x86_microsoft-windows-m... mponents-jetintlerr_31bf3856ad364e35_6.1.7600.16385_none_0f472a3521bdcfd4\msjint40.dll is not actual file [l:24 {12}] "msjint40.dll": "

  Found: {l:32 b:4co68RsJJzz / 05RpZb1lX48bQFAlpOhNYOhLRTD0T2o =} expected: {l:32 b:hz / peGdAuJRqXXf8RXlIEtc + 8CQBNBHngjeC5skUVWc =}

  2012-10-05 16:52:42, 000002 a-1 CSI Info [SR] could not reproject corrupted file [ml:48 {24}, l:46 {23}] '------? \C:\Windows\SysWOW64"\[l:24{12}]"msjint40.dll '; source file in the store is also corrupted

  Thank you

  Heather

  The date of 07/14/2009 of the file is correct.

  Did anything else on PC donations problems?

  You have a real MS win7 dvd or only a recovery disk?

  If you run chkdsk which reveals problems?

• Error: Type was not found or was not a compilation constant: PromptDialog.

  My PlayBook application compiles to the BB10 SDK of AIR due to the error in the subject. See also: https://developer.blackberry.com/air/beta/apis/qnx/dialog/PromptDialog.html#includeExamplesSummary

  package
  {
      import flash.display.Sprite;
      import qnx.fuse.ui.dialog.AlertDialog;
      import qnx.dialog.PromptDialog;
  
      [SWF(width="768", height="1280", backgroundColor="#FFFFFF", frameRate="60")]
      public class Example extends Sprite
      {
          public function Example()
          {
              try
              {
                  showPromptDialog();
              }
              catch(error:Error)
              {
                  dialog("Error on Initialization", error.message);
              }
          }
  
          private function showPromptDialog():void
          {
              var prompt:PromptDialog = new PromptDialog();
              // ...
          }
  
          private function debug(msg:String):void
          {
              dialog("Debug", msg);
          }
  
          private function dialog(title:String, msg:String):void
          {
              var alert:AlertDialog = new AlertDialog();
              alert.title = title;
              alert.message = msg;
              alert.addButton("Ok");
              alert.show();
          }
      }
  }
  

  Please do not take into account. Somehow I failed to change the import statement to refer to the new location of this class in BB10:

  Import qnx.fuse.ui.dialog.PromptDialog;

• Colon, causing a "the requested object is not found on this server" error

  I have a Description field that is defined as a text box, its game to maintain up to 4000 characters and works perfectly, but if the user enters a colon: in the text and tries to save changes, or navigate to another page, we get a "the requested object was not found on this server" error. If I update the field through SQL, it updates very well.
  
  Please let know us in this moment test phase of the customer. Thank you, Laura

  When you close a thread and mark, you must assign points to correct answers...

  Thank you

  Tony Miller
  Webster, TX

• Vim object reference not found

  Hello

  I'm trying to convert VCD vApps vm to vCenter vm workflow orchestrator of trough with the following code, when I try to run the function getVMVimRef() (on a virtual machine) it throws error "object reference not found Vim.

  Any ideas as to what could cause a VM to do not have a Vim reference?

  My workflow code is in the list below

  var vcVms = new Array();

  System.log (' VM passed: "+ vms.length");

  for (var i in SMV) {}

  moref var is vms [i] .getVMVimRef () .moRef;.

  "var XPath =" xpath:id = "" + moref + "'";

  var VMs is VcPlugin.getAllVirtualMachines (null, XPath);.

  var vm = VMs [0];

  vmName var = vm.name;

  vcVms [i] = vm;

  }

  -APR

  Check your plugin configuration. It is likely that you are not connected to the Organization of the system.

  This is required for access to the getVMVimRef() method.

  Christophe.

• Type was not found or was not a compilation constant: ArrayCollection collection

  I've never seen this type of error before. I was running the asdoc tool when I arrived at the Office:

  package adventureGame.util
  {
       import mx.collections.ArrayCollection;
  
       public class ACConvertor
       {
            public function toAC(array:Array):ArrayCollection
            {
                 var arrayObject:Array = new Array();
                 var ac:ArrayCollection = new ArrayCollection();
                 
                 return ac = arrayObject as ArrayCollection;
            }
       }
  }
  

  Why I get:

  ACConvertor.as (31): col: 37 error: Type was not found or is not a constant of compilation: ArrayCollection collection.
  
  public void toAC(array:Array):ArrayCollection

  Collection ArrayCollection and any class that starts with mx... is that the Flex code. You work in an IDE Flex or Flash?

• Type was not found or was not a compilation constant: ImportExportConfiguration

  Hello

  I use a text layout framework and get an error type was not found or was not a compilation constant: ImportExportConfiguration. I use Flex Builder 3, Flex SDK version flex_sdk_4.0.0.10485 and flash player 10.0.12, surprisingly this not found error in my project workspace.

  In my code I am using

  Import flashx.textLayout.container.DisplayObjectContainerController;

  Help

  Thank you

  Kumar Gaurav Pandey

  You are using an older version of our code. I suggest upgrade you to the latest code, see: http://opensource.adobe.com/wiki/display/flexsdk/Flex+SDK.

  You don't need to use the Flex Framework, but it comes with the latest textLayout libraries and source code.

  Hope this helps,

  -robin

• Type was not found: CharacterFormat

  I downloaded the latest version of the SDK Gumbo (version 4.0.0.5032) and using this SDK target (and Flash Player 10.0.0 as necessary flashplayer in FlexBuilder), I get the following errors:
  
  Type was not found or was not a compilation constant: CharacterFormat
  (similar errors for ICharacterFormat, ParagraphFormat).
  
  I understood the foregoing through:
  Import flashx.textLayout.formats.CharacterFormat;
  
  If I download latest libraries of framework for page text on the Adobe site (called textlayout_framework_p1_111808.zip zip file) and replace the files:
  
  textLayout_conversion.swc
  textLayout_core.swc
  textLayout_edit.swc
  
  in the < sdk4.0.0.5032 >/frameworks/libs with the newly downloaded files folder, I get a different game or errors:
  
  Type was not found or was not a compilation constant: ChangeElementIdOperation
  The property id access may not be defined through a reference with static type flashx.textLayout.elements:FlowElement
  
  I understood the foregoing through:
  import flashx.textLayout.operations.ChangeElementIdOperation
  
  In my project, I can't use both the CharacterFormat but also ChangeElementIdOperation. Is there a version of Gumbo that will allow me to use these two classes in my code? Is there any set of SWC, that I need to download and place in a specific folder in the installation of Flex to make the code to compile correctly?

  The format classes have been merged into a single TextLayoutFormat in a recent series of changes to the API. You can read about these changes to API on our blog: changes of API TLF in build 370